loshia (OP)
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 09, 2014, 05:47:03 PM Last edit: February 09, 2014, 06:03:46 PM by loshia |
|
Morning fellows, My board PIC FW and heat sink and fans were upgraded yesterday. What I can tell you it rocks. Here are my results after 14+ hours nonstop mining Some things to point out: 1. My stats are not settled yet, because I am mining at 512 diif + filtering out nonces inside ASIC chips which do not meet it. The board is making 270GH stable and there is some room for overclocking. BUT I do not feel brave enough to do it and I suggest to all of you not to push it too much. We are hiiting the limits of hardware especially voltage regulators so overdriving them for a long period is not good idea at all. This is my personal opinion. I do hope that there will be precise measurement of power consumption very soon. I am using single rail psu rated 55A/12V. I think the bottom line is at lest 45A, to be on a safe side 2. Tplink+cgminer worked rock stable without an issue. My pool reject rate is 0.12% only which is golden! I am not commenting my HW error rate at all ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Technobit team did their job just perfect ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) 3. What I can tell you that all of you should be able to get the 260Gh advertised at clock around 260 and voltage around 1000 mv. You have to experiment a little bit to find your sweet spot though. More updates to come loshia what are the temps being reported back? No temp sensor on the board dude. But it is getting hard to touch if not cooled right ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I would say up to 25 maybe 30 celsius you will be ok with stock fans an heatsink. My room temp is not more than 15 because of the winter so cooler is always better
|
|
|
|
aopa38
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 09, 2014, 06:04:26 PM |
|
Morning fellows, My board PIC FW and heat sink and fans were upgraded yesterday. What I can tell you it rocks. Here are my results after 14+ hours nonstop mining ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs30.postimg.org%2Fl908iqo5t%2Fimage.jpg&t=665&c=qOrykrT48qy9-A) Some things to point out: 1. My stats are not settled yet, because I am mining at 512 diif + filtering out nonces inside ASIC chips which do not meet it. The board is making 270GH stable and there is some room for overclocking. BUT I do not feel brave enough to do it and I suggest to all of you not to push it too much. We are hiiting the limits of hardware especially voltage regulators so overdriving them for a long period is not good idea at all. This is my personal opinion. I do hope that there will be precise measurement of power consumption very soon. I am using single rail psu rated 55A/12V. I think the bottom line is at lest 45A, to be on a safe side 2. Tplink+cgminer worked rock stable without an issue. My pool reject rate is 0.12% only which is golden! I am not commenting my HW error rate at all ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Technobit team did their job just perfect ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) 3. What I can tell you that all of you should be able to get the 260Gh advertised at clock around 260 and voltage around 1000 mv. You have to experiment a little bit to find your sweet spot though. More updates to come loshia what are the temps being reported back? No temp sensor on the board dude. But it is getting hard to touch if not cooled right ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I would say up to 25 maybe 30 celsius you will be ok with stock fans an heatsink. My room temp is not more than 15 because of the winter so cooler is always better Good to hear. We keep our "mining room/datacenter" at about 18c but I heard these things need some space to themselves.
|
|
|
|
hanspeter77
Legendary
Offline
Activity: 3136
Merit: 1176
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 09, 2014, 06:43:06 PM |
|
how much you want for the miner? 1,4btc
|
|
|
|
Gator-hex
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 09, 2014, 07:41:30 PM Last edit: February 09, 2014, 08:15:37 PM by Gator-hex |
|
how much you want for the miner? 1,4btc
First batch (only 30x units) cost €1,500 BTC right now = €511 I don't think anyone will part with one for 1.4BTC = instant loss. I know you're hinting we could have bought an AntMiner, but AntMiner was 1.95BTC and BTC was €615 when these orders were taken. Back then it looked the same $/GH, but with better GH/W, but sadly not now, such is the risk of buying on specs.
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2014, 02:54:09 AM |
|
Morning fellows, My board PIC FW and heat sink and fans were upgraded yesterday. What I can tell you it rocks. Here are my results after 14+ hours nonstop mining
I was curious what kind of heatsink upgrade ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2014, 03:35:55 PM |
|
New image for TL-MR3020 + cgminer 3.12.3 patch 0.2.0 Milestone release
|
|
|
|
Gator-hex
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2014, 03:47:51 PM |
|
Do I need to reset the TL-MR3020 back to factory settings for it to install? If so how, do I do that? Thanks.
|
|
|
|
loshia (OP)
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 10, 2014, 03:49:13 PM |
|
Do I need to reset the TL-MR3020 back to factory settings for it to install? If so how, do I do that? Thanks. Hey, Read the change long ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Use *sysupgrade.bin for openwrt preflashed router or *facory.bin for factory FW router. As i call it a virgin one ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Short answer no, but after you install it go to web interface cgminer configuration andfeel all blanks with default values quoted and Save+Apply
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 11, 2014, 07:54:50 AM |
|
Do I need to reset the TL-MR3020 back to factory settings for it to install? If so how, do I do that? Thanks. No need to reset, just browse the new image & hit flash ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) But i usually use factory bin, i am prefer "fresh install" ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs24.postimg.org%2Fuquumbn3p%2Fflash.jpg&t=665&c=4BfgoVqrOKOffw)
|
|
|
|
BTC5OOO
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
Trust:+4:20--Warning* ASICs with extreme hashrate!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 17, 2014, 06:03:41 AM |
|
nice toaster! =) *where can i get one?
|
|
|
|
gcube1305
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 09:26:58 PM |
|
Got mine today, working perfectly, stable 260Ghs on a tl-mr3020 with patched firmware and default settings. But this thing is incredibly noisy ...
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 22, 2014, 03:20:23 AM |
|
Got mine today, working perfectly, stable 260Ghs on a tl-mr3020 with patched firmware and default settings. But this thing is incredibly noisy ...
Gratz gcube ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
|
|