New S9s BMminer/Hardware Version missing AFTER pool change.

[boyno]

Messed around with 2 new S9s last night and could not get them to start hashing so I went to bed.

Tried,
Reboot
Reset
New Firmware
Old Firmware
New eth cables

240v bitmain PSUs

Spent this morning switching out some power cables and such and still nothing. So I decided to plug my other 2 S9s in and they start hashing on factory antpool settings right away. I never looked at the first 2 status before changing to my my pool. As soon as I switch to my pool BMminer/Hardware Version disappears and no hashing/temps....If I change it back to factory antpool it does not start hashing again and BMminer/Hardware Version is stays blank...

Any ideas?

[fanatic26]

bmminer version and hardware version are always going to be blank if the bmminer cannot start properly. Its not a symptom of a problem its a byproduct. Please post the kernel log of one of your machines having issues after it has fully booted and we can start to troubleshoot it.

[boyno]

thanks, I noticed they do hash on antpool after reset but craps out when I change it to slush.

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000310] ps7-ttc #0 at df804000, irq=43
[    0.000619] Console: colour dummy device 80x30
[    0.000648] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040208] pid_max: default: 32768 minimum: 301
[    0.040427] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040448] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042569] CPU: Testing write buffer coherency: ok
[    0.042905] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042964] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043188] L310 cache controller enabled
[    0.043208] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121036] CPU1: Booted secondary processor
[    0.210228] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210360] Brought up 2 CPUs
[    0.210379] SMP: Total of 2 processors activated.
[    0.210387] CPU: All CPU(s) started in SVC mode.
[    0.211047] devtmpfs: initialized
[    0.213462] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214671] regulator-dummy: no parameters
[    0.221942] NET: Registered protocol family 16
[    0.224127] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226428] cpuidle: using governor ladder
[    0.226441] cpuidle: using governor menu
[    0.233842] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235367] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235380] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235493] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257308] bio: create slab <bio-0> at 0
[    0.258743] vgaarb: loaded
[    0.259444] SCSI subsystem initialized
[    0.260463] usbcore: registered new interface driver usbfs
[    0.260645] usbcore: registered new interface driver hub
[    0.260867] usbcore: registered new device driver usb
[    0.261427] media: Linux media interface: v0.10
[    0.261583] Linux video capture interface: v2.00
[    0.261831] pps_core: LinuxPPS API ver. 1 registered
[    0.261843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.261965] PTP clock support registered
[    0.262317] EDAC MC: Ver: 3.0.0
[    0.263395] Advanced Linux Sound Architecture Driver Initialized.
[    0.266247] DMA-API: preallocated 4096 debug entries
[    0.266260] DMA-API: debugging enabled by kernel config
[    0.266336] Switched to clocksource arm_global_timer
[    0.286218] NET: Registered protocol family 2
[    0.287294] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287352] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287436] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287484] TCP: reno registered
[    0.287501] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287534] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288116] NET: Registered protocol family 1
[    0.288527] RPC: Registered named UNIX socket transport module.
[    0.288540] RPC: Registered udp transport module.
[    0.288549] RPC: Registered tcp transport module.
[    0.288557] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288570] PCI: CLS 0 bytes, default 64
[    0.289005] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291023] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293106] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293308] msgmni has been set to 967
[    0.294084] io scheduler noop registered
[    0.294098] io scheduler deadline registered
[    0.294136] io scheduler cfq registered (default)
[    0.305849] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.305870] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.431330] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.998665] console [ttyPS0] enabled
[    1.002945] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.010588] [drm] Initialized drm 1.1.0 20060810
[    1.027638] brd: module loaded
[    1.037010] loop: module loaded
[    1.046594] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.052455] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.060243] libphy: XEMACPS mii bus: probed
[    1.064609] ------------- phy_id = 0x3625e62
[    1.069530] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.078153] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.084773] ehci-pci: EHCI PCI platform driver
[    1.092015] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.098883] usbcore: registered new interface driver usb-storage
[    1.105715] mousedev: PS/2 mouse device common for all mice
[    1.111827] i2c /dev entries driver
[    1.118804] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.124285] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.130221] Xilinx Zynq CpuIdle Driver started
[    1.135065] sdhci: Secure Digital Host Controller Interface driver
[    1.141186] sdhci: Copyright(c) Pierre Ossman
[    1.145497] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.152328] mmc0: no vqmmc regulator found
[    1.156371] mmc0: no vmmc regulator found
[    1.196363] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205057] usbcore: registered new interface driver usbhid
[    1.210575] usbhid: USB HID core driver
[    1.215276] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221568] nand: Micron MT29F2G08ABAEAWP
[    1.225538] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231487] Bad block table found at page 131008, version 0x01
[    1.237735] Bad block table found at page 130944, version 0x01
[    1.243782] 3 ofpart partitions found on MTD device pl353-nand
[    1.249558] Creating 3 MTD partitions on "pl353-nand":
[    1.254660] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262728] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270049] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279008] TCP: cubic registered
[    1.282245] NET: Registered protocol family 17
[    1.286966] Registering SWP/SWPB emulation handler
[    1.292838] regulator-dummy: disabling
[    1.297231] UBI: attaching mtd1 to ubi0
[    1.821099] UBI: scanning is finished
[    1.832710] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.839787] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.846548] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.853213] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.860091] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.866060] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.873191] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1283732989
[    1.882222] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.891438] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.891443] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.895341] ALSA device list:
[    1.895345]   No soundcards found.
[    1.911824] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.940804] UBIFS: recovery needed
[    2.027430] UBIFS: recovery completed
[    2.031086] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.037037] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.046127] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.056031] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.061069] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[    2.072577] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.079991] devtmpfs: mounted
[    2.083096] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.923331] random: dd urandom read with 0 bits of entropy available
[    3.336387] 
[    3.336387] bcm54xx_config_init
[    3.946387] 
[    3.946387] bcm54xx_config_init
[    7.947208] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.953300] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   25.096964] In axi fpga driver!
[   25.100029] request_mem_region OK!
[   25.103420] AXI fpga dev virtual address is 0xdf9fc000
[   25.108575] *base_vir_addr = 0x8c510
[   25.124090] In fpga mem driver!
[   25.127218] request_mem_region OK!
[   25.130727] fpga mem virtual address is 0xe2000000
[   25.916384] 
[   25.916384] bcm54xx_config_init
[   26.546391] 
[   26.546391] bcm54xx_config_init
[   30.547201] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   30.553218] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  663.887125] random: nonblocking pool is initialized
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 807c55c67680881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[10] has core num=3
Chain[6] ASIC[51] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[25] has core num=1
Chain[7] ASIC[29] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-4,0,0,0,0,37,0
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,-3,0,0,0,0,37,0
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,-5,0,0,0,0,37,0
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 9850 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=29616 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=16553 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 3724 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 807c55c67680881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5640
get fan[2] speed=5640
get fan[2] speed=5640
get fan[2] speed=5640
get fan[2] speed=5640
get fan[2] speed=5640
get fan[2] speed=5640
get fan[2] speed=5640
get fan[2] speed=5640
get fan[5] speed=5760
get fan[2] speed=5640
get fan[5] speed=5760
get fan[2] speed=5640
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J7] ASIC[10] has core num=3
Chain[J7] ASIC[51] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[25] has core num=1
Chain[J8] ASIC[29] has core num=1
miner total rate=13591GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-4
Chain:5 base freq=631
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
Chain:5 max freq=631
Chain:5 min freq=631

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-3
Chain:6 base freq=631
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
Chain:6 max freq=631
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=631
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
Chain:7 max freq=631
Chain:7 min freq=631


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-4
Chain:5 base freq=631
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
Chain:5 max freq=631
Chain:5 min freq=631

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-3
Chain:6 base freq=631
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
Chain:6 max freq=631
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=631
Asic[ 0]:631 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
Chain:7 max freq=631
Chain:7 min freq=631

max freq = 631
set baud=1
Chain[J6] PIC temp offset=62,-4,0,0,0,0,37,0
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=-4 typeID=55
New offset Chain[5] chip[244] local:52 remote:55 offset:29 
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset=62,-3,0,0,0,0,37,0
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=-3 typeID=55
New offset Chain[6] chip[244] local:47 remote:50 offset:29 
Chain[J7] chip[244] get middle temp offset=29 typeID=55
Chain[J8] PIC temp offset=62,-5,0,0,0,0,37,0
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=-5 typeID=55
New offset Chain[7] chip[244] local:42 remote:47 offset:26 
Chain[J8] chip[244] get middle temp offset=26 typeID=55
single board rate=4531 voltage limit=890 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 890
single board rate=4529 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
single board rate=4530 voltage limit=890 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 890
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=912	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=631	freq[01]=631	freq[02]=631	freq[03]=631	freq[04]=631	freq[05]=631	freq[06]=631	freq[07]=631	
freq[08]=631	freq[09]=631	freq[10]=631	freq[11]=631	freq[12]=631	freq[13]=631	freq[14]=631	freq[15]=631	
freq[16]=631	freq[17]=631	freq[18]=631	freq[19]=631	freq[20]=631	freq[21]=631	freq[22]=631	freq[23]=631	
freq[24]=631	freq[25]=631	freq[26]=631	freq[27]=631	freq[28]=631	freq[29]=631	freq[30]=631	freq[31]=631	
freq[32]=631	freq[33]=631	freq[34]=631	freq[35]=631	freq[36]=631	freq[37]=631	freq[38]=631	freq[39]=631	
freq[40]=631	freq[41]=631	freq[42]=631	freq[43]=631	freq[44]=631	freq[45]=631	freq[46]=631	freq[47]=631	
freq[48]=631	freq[49]=631	freq[50]=631	freq[51]=631	freq[52]=631	freq[53]=631	freq[54]=631	freq[55]=631	
freq[56]=631	freq[57]=631	freq[58]=631	freq[59]=631	freq[60]=631	freq[61]=631	freq[62]=631	

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25852
last_nonce_num:29194
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=912	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=631	freq[01]=631	freq[02]=631	freq[03]=631	freq[04]=631	freq[05]=631	freq[06]=631	freq[07]=631	
freq[08]=631	freq[09]=631	freq[10]=631	freq[11]=631	freq[12]=631	freq[13]=631	freq[14]=631	freq[15]=631	
freq[16]=631	freq[17]=631	freq[18]=631	freq[19]=631	freq[20]=631	freq[21]=631	freq[22]=631	freq[23]=631	
freq[24]=631	freq[25]=631	freq[26]=631	freq[27]=631	freq[28]=631	freq[29]=631	freq[30]=631	freq[31]=631	
freq[32]=631	freq[33]=631	freq[34]=631	freq[35]=631	freq[36]=631	freq[37]=631	freq[38]=631	freq[39]=631	
freq[40]=631	freq[41]=631	freq[42]=631	freq[43]=631	freq[44]=631	freq[45]=631	freq[46]=631	freq[47]=631	
freq[48]=631	freq[49]=631	freq[50]=631	freq[51]=631	freq[52]=631	freq[53]=631	freq[54]=631	freq[55]=631	
freq[56]=631	freq[57]=631	freq[58]=631	freq[59]=631	freq[60]=631	freq[61]=631	freq[62]=631	

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25865
last_nonce_num:29191
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=906	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=912	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[25]=906
core[036]=2	



freq[00]=631	freq[01]=631	freq[02]=631	freq[03]=631	freq[04]=631	freq[05]=631	freq[06]=631	freq[07]=631	
freq[08]=631	freq[09]=631	freq[10]=631	freq[11]=631	freq[12]=631	freq[13]=631	freq[14]=631	freq[15]=631	
freq[16]=631	freq[17]=631	freq[18]=631	freq[19]=631	freq[20]=631	freq[21]=631	freq[22]=631	freq[23]=631	
freq[24]=631	freq[25]=631	freq[26]=631	freq[27]=631	freq[28]=631	freq[29]=631	freq[30]=631	freq[31]=631	
freq[32]=631	freq[33]=631	freq[34]=631	freq[35]=631	freq[36]=631	freq[37]=631	freq[38]=631	freq[39]=631	
freq[40]=631	freq[41]=631	freq[42]=631	freq[43]=631	freq[44]=631	freq[45]=631	freq[46]=631	freq[47]=631	
freq[48]=631	freq[49]=631	freq[50]=631	freq[51]=631	freq[52]=631	freq[53]=631	freq[54]=631	freq[55]=631	
freq[56]=631	freq[57]=631	freq[58]=631	freq[59]=631	freq[60]=631	freq[61]=631	freq[62]=631	

total valid nonce number:57450
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25864
last_nonce_num:35741
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=998 total_tv_end_sys=999
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=36.1880 Asic[02]=17.0120 Asic[03]=17.0450 Asic[04]=17.2460 Asic[05]=17.8670 Asic[06]=17.2130 Asic[07]=17.8840 Asic[08]=17.5650 
Asic[09]=17.6660 Asic[10]=4652.31 Asic[11]=17.6490 Asic[12]=17.5650 Asic[13]=326.182 Asic[14]=17.2130 Asic[15]=17.4140 Asic[16]=17.0120 
Asic[17]=17.5480 Asic[18]=17.2300 Asic[19]=17.1790 Asic[20]=17.7670 Asic[21]=18.0010 Asic[22]=16.8440 Asic[23]=17.4140 Asic[24]=16.7770 
Asic[25]=17.5150 Asic[26]=17.6830 Asic[27]=17.5820 Asic[28]=17.4480 Asic[29]=19.0420 Asic[30]=17.8670 Asic[31]=16.6930 Asic[32]=17.2970 
Asic[33]=16.7770 Asic[34]=17.0950 Asic[35]=4652.25 Asic[36]=17.4140 Asic[37]=17.6830 Asic[38]=75.7820 Asic[39]=44.0230 Asic[40]=17.4310 
Asic[41]=17.0790 Asic[42]=17.6660 Asic[43]=17.0620 Asic[44]=17.1960 Asic[45]=17.6160 Asic[46]=17.6660 Asic[47]=17.5320 Asic[48]=16.5080 
Asic[49]=16.6420 Asic[50]=17.0280 Asic[51]=17.3300 Asic[52]=17.6830 Asic[53]=17.4140 Asic[54]=17.5480 Asic[55]=17.3810 Asic[56]=17.6830 
Asic[57]=18.4540 Asic[58]=16.9780 Asic[59]=17.6160 Asic[60]=17.3810 Asic[61]=17.5650 Asic[62]=16.8770 Asic[63]=17.6660 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=33.8730 Asic[02]=16.0050 Asic[03]=16.0390 Asic[04]=16.1220 Asic[05]=16.7430 Asic[06]=70.6820 Asic[07]=16.7100 Asic[08]=16.5590 
Asic[09]=16.5750 Asic[10]=4720.67 Asic[11]=16.4580 Asic[12]=16.4580 Asic[13]=16.3410 Asic[14]=16.1900 Asic[15]=16.3240 Asic[16]=15.9380 
Asic[17]=16.3410 Asic[18]=16.1220 Asic[19]=16.1060 Asic[20]=147.069 Asic[21]=16.8940 Asic[22]=15.7200 Asic[23]=16.4080 Asic[24]=15.7200 
Asic[25]=16.4080 Asic[26]=16.5750 Asic[27]=16.4750 Asic[28]=16.3570 Asic[29]=17.9010 Asic[30]=16.7770 Asic[31]=15.7030 Asic[32]=16.2730 
Asic[33]=15.7200 Asic[34]=16.0220 Asic[35]=4720.69 Asic[36]=16.3240 Asic[37]=16.5750 Asic[38]=16.5080 Asic[39]=41.3720 Asic[40]=16.3070 
Asic[41]=16.0050 Asic[42]=16.5590 Asic[43]=16.0050 Asic[44]=16.1220 Asic[45]=16.5080 Asic[46]=16.5080 Asic[47]=16.4240 Asic[48]=15.4680 
Asic[49]=15.6020 Asic[50]=16.0050 Asic[51]=16.1390 Asic[52]=16.5750 Asic[53]=16.3240 Asic[54]=16.4410 Asic[55]=16.2570 Asic[56]=16.5590 
Asic[57]=17.4480 Asic[58]=15.9550 Asic[59]=16.4580 Asic[60]=16.3070 Asic[61]=16.5420 Asic[62]=15.8200 Asic[63]=16.5590 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=29.7290 Asic[02]=14.0590 Asic[03]=46.4890 Asic[04]=14.1430 Asic[05]=14.6960 Asic[06]=14.1430 Asic[07]=14.6630 Asic[08]=14.5120 
Asic[09]=14.5620 Asic[10]=4845.48 Asic[11]=14.5120 Asic[12]=14.4450 Asic[13]=14.3610 Asic[14]=14.2600 Asic[15]=14.3610 Asic[16]=13.9920 
Asic[17]=14.3610 Asic[18]=14.1590 Asic[19]=14.1430 Asic[20]=14.5960 Asic[21]=14.8140 Asic[22]=13.8070 Asic[23]=46.8080 Asic[24]=13.8070 
Asic[25]=14.3940 Asic[26]=14.5290 Asic[27]=14.4610 Asic[28]=14.3610 Asic[29]=14.6960 Asic[30]=14.7470 Asic[31]=13.7900 Asic[32]=14.3100 
Asic[33]=13.8410 Asic[34]=14.0760 Asic[35]=4845.23 Asic[36]=14.3440 Asic[37]=14.5620 Asic[38]=62.4110 Asic[39]=36.3220 Asic[40]=14.3270 
Asic[41]=14.0760 Asic[42]=14.5450 Asic[43]=14.0590 Asic[44]=14.1430 Asic[45]=14.4950 Asic[46]=14.4950 Asic[47]=14.4450 Asic[48]=13.5890 
Asic[49]=13.6900 Asic[50]=14.0920 Asic[51]=14.1760 Asic[52]=14.5620 Asic[53]=14.3440 Asic[54]=14.4280 Asic[55]=14.3100 Asic[56]=14.5450 
Asic[57]=14.2430 Asic[58]=14.0250 Asic[59]=14.4450 Asic[60]=14.3100 Asic[61]=14.5120 Asic[62]=13.8910 Asic[63]=14.5450 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[10]=4652.310000
Asic[13]=326.182000
Asic[35]=4652.250000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[10]=4720.670000
Asic[20]=147.069000
Asic[35]=4720.690000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[10]=4845.480000
Asic[35]=4845.230000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=29
Chain[5] Chip[62] local Temp=70
Chain[5] Chip[62] middle Temp=79
Special fix Chain[5] Chip[62] middle Temp = 85
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=29
Chain[6] Chip[62] local Temp=67
Chain[6] Chip[62] middle Temp=77
Special fix Chain[6] Chip[62] middle Temp = 82
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=26
Chain[7] Chip[62] local Temp=64
Chain[7] Chip[62] middle Temp=74
Special fix Chain[7] Chip[62] middle Temp = 79
Done read temp on Chain[7]
set FAN speed according to: temp_highest=70 temp_top1[PWM_T]=70 temp_top1[TEMP_POS_LOCAL]=70 temp_change=1 fix_fan_steps=0
FAN PWM: 88
read_temp_func Done!
CRC error counter=0

[boyno]

ok so Im really stupid. I had workername instead of account.workername...