Can't mine dogecoin

[LaughingJack]

Hi,

I have a problem with dogecoin mining.

http://image.noelshack.com/fichiers/2013/51/1387549231-doge.png

And after there is always "stratum from pool 0 detected new bloc"

Please, help me!

[pontiacg5]

You are not mining scrypt, you can tell as the hashrate is displayed in MH/s. Chances are you forgot the --scrypt tag for launching cgminer.

[LaughingJack]

I deleted the --scrypt because with it, I have started cgminer 3.7.2 and nothing else

[traxx187]

try to add it again what does your --Scrypt -o look like?

[pontiacg5]

I deleted the --scrypt because with it, I have started cgminer 3.7.2 and nothing else

You can't mine scrypt without adding the scrypt argument. Not sure what you expected?

Getting stuck on "started cgminer...." usually has something to do with the pool credentials being wrong or down. Otherwise it's from overclocks being set too high.

[LaughingJack]

Okay sow now I have "stratum from pool 0 detected new bloc" but the scrypt is deleted. And I don't have the top party of the window with the Mh/s, °C, ect

PS : I'm french, sorry if I don't understand all

[pontiacg5]

Okay sow now I have "stratum from pool 0 detected new bloc" but the scrypt is deleted.

PS : I'm french, sorry if I don't understand all

All you will ever see is "new block detected" while you have --scrypt deleted. You can't mine scrypt coins without using the scrypt kernel.

Put --scrypt back, or don't mine. These are the only options.

[LaughingJack]

Sorry, I didn't wanted to say that, I WROTE it back, but now I just have new block detected

[pontiacg5]

What is your hash rate now, does it say ~25kh/s? I assume it is exceptionally low based on the first picture posted, and that is why you don't see any accepted shares yet. Wait a longer time, you should see something eventually.

 

[LaughingJack]

Actually, I have :

http://image.noelshack.com/fichiers/2013/51/1387563780-doge.png

And on the dashboard, 0kh/s

[pontiacg5]

You aren't mining, then. Something in your configuration is wrong, so mining never starts.

Please post the settings you use to launch cgminer, as well as the hardware you are using.

[LaughingJack]

I'm not very good in computer, but, I think this is my hardware

Système d'exploitation
Windows 7 Edition Familiale Premium ‎(X64)‎ Service Pack 1
Date d'installation: 22/05/2013
Processeur
Intel Core i3 2100 Cadencé à 3.10 GHz
Nombre de coeurs: 2 physique(s), 4 logique(s)
Socket: Socket 1155 LGA
Carte mère
Foxconn 2ABF 1.00
SKU Number: A0N64EA#ABF
Version du bios: 7.08
Date: 02/06/2011
Chipset
Pont nord : Intel Sandy Bridge
Identifiant de révision: 09
Pont sud : Intel H61
Identifiant de révision: B3
Mémoire
6 Go de mémoire totale de type DDR3
Timings mémoire: 9.0 clocks-9 clocks-9 clocks-24 clocks-1 TT
Barrette Samsung de 4 Go
Fréquence maximale: 667 MHz
Bande passante: PC3-10700
Barrette Micron Technology de 2 Go
Fréquence maximale: 667 MHz
Bande passante: PC3-10700
Carte Graphique
AMD RADEON HD 6450
Version DirectX installée: 11.0
Disque dur
Disque dur WDCWD15EARS-60MVWB0 de 1.36 To SATA II
Firmware: 51.0AB51
Version du SATA: SATA Rev 2.6
Numéro de série: WD-WCAZA7964565
Temps de fonctionnement: 3845 heures
Disque dur Generic- Multi-Card USB Device
Lecteurs optiques
hp CDDVDW TS-H653T
Type: DVD-R/DL sequential recording Recorder
Version du firmware: H6D1
Réseau
Realtek PCIe GBE Family Controller
Type d'adaptateur: ethernet
Software Loopback Interface 1
Type d'adaptateur: Loopback
Cartes multimedia
Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller
Advanced Micro Devices, Inc. [AMD/ATI] Caicos HDMI Audio [Radeon HD 6400 Series]
Clavier
Primax Electronics, Ltd HP Keyboard (USB Keyboard)
Souris
Pixart Imaging, Inc. Optical Mouse (USB OPTICAL MOUSE)
Ecran(s)
BenQ FP91GX
Resolution maximum: 1280 x 1024
Taille de l'écran: 19.1" (38 cm x 30 cm)
Date de fabrication: 21/10/2006
Ratio d'aspect: 4:3
Type d'entrée vidéo: Sync on Green Reserved Analog Signal
Périphérique USB
Realtek Semiconductor Corp. USB 2.0 multicard reader (USB2.0-CRW)
Version USB supportée: 2.0
Pixart Imaging, Inc. Optical Mouse (USB OPTICAL MOUSE)
Version USB supportée: 1.10
Primax Electronics, Ltd HP Keyboard (USB Keyboard)
Version USB supportée: 1.10

And I don't use any settings to launch cgminer or the .bat :

http://image.noelshack.com/fichiers/2013/51/1387564847-doge.png

[pontiacg5]

You may try removing the "pause" line from the bat file.

I can see you have a 6400 series video card, do you know the exact series you have? It would be most helpful.

Try this, though.

cgminer --scrypt -o (enter your info here) -u (again) -p (again)  -I 9 -g 1 -w 64

[LaughingJack]

I tryed "cgminer --scrypt -o (enter your info here) -u (again) -p (again)  -I 9 -g 1 -w 64"

but still stuck on started cgminer 3.7.2

I have an AMD Radeon HD 6450

[muchogas]

I actually had that same card, exactly the same and I couldn't mine at all... Finally I just ended up buying a "typical" ATI7950 and it works perfectly fine. 

[LaughingJack]

I'm happy for you, but infortunly I can't do the same.

[pontiacg5]

I am about out of ideas for things to try, other than reinstalling video drivers.

FWIW that card is exceptionally weak, it's probably not even worth running it anyway. There are CPUs that can probably get better hashrates on scrypt...

[datguys]

minerd -a scrypt -t 4 -s 6 -o stratum+tcp://doge.scryptpools.com:3333 -O user.username:password

try that but add your credentials