Bitcoin Forum
June 17, 2024, 03:43:18 PM *
News: Voting for pizza day contest
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: CGMiner & Raspberry Pi  (Read 2262 times)
sLide. (OP)
Full Member
***
Offline Offline

Activity: 170
Merit: 100



View Profile
December 07, 2013, 07:47:48 AM
 #1

As a project, I wanted to get some USB BE's on a raspberry Pi.  I've followed this tut to the T, and I'm getting an error that I haven't yet found the answer to on these forums or google. 

http://learn.adafruit.com/piminer-raspberry-pi-bitcoin-miner/install-cgminer

I'm entering in sudo nohup ./cgminer-3.1.1/cgminer --config /home/pi/cgminer.conf -s/dev/ttyUSB0 -s /dev/ttyUSB1 -s /dev/ttyUSB2 -s /dev/ttyUSB3 >/dev/null 2>&1&

I'm getting a return value of [1] 2548.

The green led's are not turning off.  Da faq am I doing wrong?

Aim - Slide.0
1J6UeiXtBYXmpA6uajRs3aJpUD1Tsj1CF3 - Tips?
cxboyminer
Hero Member
*****
Offline Offline

Activity: 896
Merit: 500



View Profile
December 07, 2013, 07:58:18 AM
 #2

Are you using a powered usb hub?

.Minter.                       ▄▄▄▄▄▄▄▄▄
                  ▄▄▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▄▄
               ▄▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▄
            ,▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▄
          ,▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▄
         ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
        ▓▓▓▓▓▓▓▓▓▓█▀█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▀█▓▓▓▓▓▓▓▓▓▓
       ▓▓▓▓▓▓▓▓▓▓▓    █▓▓▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓
      █▓▓▓▓▓▓▓▓▓▓▓▓▓    ▀▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓▓
      ▓▓▓▓▓▓▓▓▓▓▓▓▓█▓▓▄   ▀▓▀   ▓▓   ▓▓▓▓▓▓▓▓▓▓▓▓
     ▐▓▓▓▓▓▓▓▓▓▓▓▓   ▓▓▓▄     ▄▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓▓▌
     ╟▓▓▓▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▄ ▄▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓▓▌
     ▐▓▓▓▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓▓▌
      ▓▓▓▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓▓
      ║▓▓▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓▌
       ▀▓▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓▓▓   ▓▓▓▓▓▓▓▓▓▓▓
        ▀▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
         ╙▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▀
           ▀▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▀
             ▀█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▀
                ▀█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▀
                     ▀▀██▓▓▓▓▓▓▓██▀▀
||

╓▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒
▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▀▀▀▀▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓▓▓▓         ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓▓▓▓         ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓▓▓▌        ▐▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓▓▓         ▀╜        ╙▀▓▓▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓▓▓                      ▓▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓▓▌                       ▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓▓                        ▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓▓         ▓▓▓▓▓▌         ▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓▌         ▓▓▓▓▓          ▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓⌐         ▓▓▓▓▓         ╣▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓         ▀█▀▀^         ╫▓▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▌                      ▒▓▓▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓                     ▒▓▓▓▓▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓                 #▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▌
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▌
▀▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▀▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▀
 ╙▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▀
WALLET




                   ▄▄████
              ▄▄████████▌
         ▄▄█████████▀███
    ▄▄██████████▀▀ ▄███▌
▄████████████▀▀  ▄█████
▀▀▀███████▀   ▄███████▌
      ██    ▄█████████
       █  ▄██████████▌
       █  ███████████
       █ ██▀ ▀██████▌
       ██▀     ▀████
                 ▀█
sLide. (OP)
Full Member
***
Offline Offline

Activity: 170
Merit: 100



View Profile
December 07, 2013, 08:03:21 AM
 #3

Are you using a powered usb hub?

Yes.  A inland 13 port USB hub. I only have 4 BE's on it right now.

Aim - Slide.0
1J6UeiXtBYXmpA6uajRs3aJpUD1Tsj1CF3 - Tips?
-ck
Legendary
*
Offline Offline

Activity: 4144
Merit: 1637


Ruu \o/


View Profile WWW
December 07, 2013, 08:24:50 AM
 #4

Latest version of cgminer works fine with RPi and erupters without using ancient tty port settings. It should just autodetect them. Note that RPis can't drive USB3 hubs since they have no usb3 drivers so if yours is USB3, you're out of luck unless you put yet another usb2 hub between that hub and the Pi.

Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
2% Fee Solo mining at solo.ckpool.org
-ck
sLide. (OP)
Full Member
***
Offline Offline

Activity: 170
Merit: 100



View Profile
December 07, 2013, 08:27:05 AM
 #5

Latest version of cgminer works fine with RPi and erupters without using ancient tty port settings. It should just autodetect them. Note that RPis can't drive USB3 hubs since they have no usb3 drivers so if yours is USB3, you're out of luck unless you put yet another usb2 hub between that hub and the Pi.

I just downloaded 3.8.1 from your github. I'm going to attempt it with that.  I believe the USB hub is 2.0 as well.

Aim - Slide.0
1J6UeiXtBYXmpA6uajRs3aJpUD1Tsj1CF3 - Tips?
-ck
Legendary
*
Offline Offline

Activity: 4144
Merit: 1637


Ruu \o/


View Profile WWW
December 07, 2013, 08:28:07 AM
 #6

Latest version of cgminer works fine with RPi and erupters without using ancient tty port settings. It should just autodetect them. Note that RPis can't drive USB3 hubs since they have no usb3 drivers so if yours is USB3, you're out of luck unless you put yet another usb2 hub between that hub and the Pi.

I just downloaded 3.8.1 from your github. I'm going to attempt it with that.  I believe the USB hub is 2.0 as well.
Why did you stop at 3.8.1?

Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
2% Fee Solo mining at solo.ckpool.org
-ck
poonasor
Jr. Member
*
Offline Offline

Activity: 49
Merit: 5


View Profile
September 09, 2022, 02:35:06 AM
 #7

so i got cgminer working on my pi3, i have it running in the background on startup, is there a way to view the stats/log without VNC or ssh via cmd?
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!