cgminer configuration

[24x7]

Hi all

I did a clean install of CentOs 6 and compiled the 422 version of cgminer.
It works for Bitfury, Antminer, but not TwinFury.
What (compile option) am I missing?

Here's a screenshot of cgminer running:-
(modified to make it legible)


cgminer version 4.2.2 - Started: [2014-03-31 02:15:11]
--------------------------------------------------------------------------------
 (10s):7.884G (1m):7.904G (5m):5.976G (15m):2.973G (avg):7.744Gh/s
 ST: 19  SS: 1  NB: 3  LW: 1658  GF: 0  RF: 0
 Connected to xxx.eclipsemc.com diff 27 with stratum as user X
 Block: d4643307...  Diff:5.01G  Started: [02:18:10]  Best share: 743
--------------------------------------------------------------------------------
USB management Pool management Settings Display options Quit
 0: ANU 0    :                         | A:187 R:27 HW: 3 WU:25.8/m
 1: ANU 1    :                         | A:213 R: 0 HW: 3 WU:27.9/m
 2: ANU 2    :                         | A:213 R: 0 HW: 1 WU:27.1/m
 3: BF1 1b0c0115:                   | A: 27 R: 0 HW:13 WU:27.2/m
--------------------------------------------------------------------------------
Option L chosen:

Select an option or any other key to return
Bus 2 Device 10 ID: 10c4:ea60 Silicon Labs CP2102 USB to UART Bridge Controller active
Bus 2 Device 9 ID: 10c4:ea60 Silicon Labs CP2102 USB to UART Bridge Controller active
Bus 2 Device 8 ID: 10c4:ea60 Silicon Labs CP2102 USB to UART Bridge Controller active
Bus 2 Device 7 ID: 03eb:204b BFMG Bitfury BF1 active
Bus 2 Device 5 ID: 03eb:204b emicrotec Twinfury inactive
5 total known USB devices
Hotplug interval:5
4 USB devices, 4 enabled, 0 disabled, 0 zombie

[-ck]

We (the cgminer developers) don't own, were never offered a twinfury or had support sponsored, nor had anyone push code for them, so there is no support for the device in cgminer, though the device type 03eb:204b comes up the same as one of the other devices cgminer knows which is why it tries to initialise it as something else and fails (since most manufacturers don't bother putting a unique identifier and all cgminer gets to see is the communication chip identifier). I doubt it would take much code to get it going, but there's no path for it to happen at this stage, and I don't know if they're even in production any more.

[24x7]

Ok thanks!