Hi guys. I'm new with mining, etc.
I have seen lotta things teaching with the Gateway 192.168.1.x or 192.168.2.x
If my S1 have labeled 192.168.1.x or 192.168.2.x and my gateway is 192.168.25.x how do I set up the S1 to mine normally ??
I need a little help with that. Sorry if it sounds like a very novice question or if it has been already responded. But thanks anyway.
-
BTC 
BTC BTCCheck out
https://bitcointalk.org/index.php?topic=344970.0 or Dogie's guide
https://bitcointalk.org/index.php?topic=355387.0. Basically you'll need to change the S1 WAN IP address to another static IP that is consistent with the address range/gateway of your router settings. If there is a clear conflict like in your case ("my gateway is 192.168.25.x"), and you cannot log into the web gui of S1 using the static IP address on the sticker, you can use a stand-alone PC which you temporarily configure to have the gateway that can connect to the S1, change the S1 configuration (log into the web gui, get into the Network tab, edit the WAN IP address to a different static IP address that is compatible with your network). Then you can connect the S1 to your network and continue with the other parameter settings as described in the guides. It's really easy, once you get familiar with the process it can be done in a few minutes.
Cheers
