it looks like you only have 1 blade mining. Check the cable running from the controller board to blade 2 to make sure they are plugged in all the way and check your power cable to also make sure it's seated right. Lower on the Miner Status page, what is it showing for Chain #2? Does it show any ASIC number or any x's?
Asic status for chain 1 and 2 is xoxoxoxo xoxoxoxo xoxoxoxo
Both of your blades show that? Do you have enough power running to it? What that status means is that every other ASIC is dead. This is why you're seeing about half the rate you should be getting. Definitely power it down and unplug the PCI-e cables. Check the unit for any obvious signs of damage like scorch marks or bent/broken pins. In addition to that, check your PSU and its cables. Make sure your PSU is actually able to provide the 360W the S1 needs, and that each of the 2 PCI-e plugs is actually providing it.