|
nokati (OP)
|
 |
March 28, 2015, 04:01:16 PM |
|
Hi, I want to get the monarch cards and I hoop you guys can help me out with this questions. The product page doenst provide enough info and there is almost no youtube videos I have read alot about angry custumers.... but it the companey still a *&*&^% or do they send the orders now? https://products.butterflylabs.com/homepage-new-products/bitcoin-mining-cards.html1) what is the watt usage of the 700-725-750 version? it says 0.65-0.85 but I want some reall life wall usage. 2) It says in stock, is it really? does any one purchase recently and got it send in 2 days? I dont need to tell what dramas you can find on the internet about BFL 3) How is the water get circulated? Is the pomp and the fan a all in one UNIT? because I want to run alot of this card and want to connect them al to a different central pomp/radioator etc... as I am using them in a very very very dusty environment. 4) I am going to use the USB port. Can I connect let say 20 Units to a single pc using powered USB hub? 5) I see on the pic from the product page that the other side have also a heatsink, I want to have everything water colled. Is it easy to replace that heatsink also? Is it a standard CPU format? I can find any good pictures or youtube videos to know what exactly are they going to send if you place an order. Is it this picture what you get if you remove the metal cover/ https://ip.bitcointalk.org/?u=https%3A%2F%2Fpbs.twimg.com%2Fmedia%2FBdf3m3-CcAEipN_.jpg%3Alarge&t=550&c=te7QGzRjZU8HfwThank for your help, really appreciated. |
|
|
|
|
|
|
|
|
Even if you use Bitcoin through Tor, the way transactions are handled by the network makes anonymity difficult to achieve. Do not expect your transactions to be anonymous unless you really know what you're doing.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
sidehack
Legendary
 Offline
Activity: 3318
Merit: 1848
Curmudgeonly hardware guy
|
|
March 28, 2015, 04:11:17 PM |
|
Take a look at the AntMiner C1. It's got a similar efficiency as the Monarch, is built for watercooling on a main external loop, is probably a lot easier to set up, is probably a lot easier to work with, is probably more reliable in general, is probably a lot cheaper to buy new, and isn't being sold by professional Right Bastards. But it networks directly so you'd need a big switch instead of a big USB hub and there wouldn't really be single-point control without a fair bit of finagling. Don't know if that's really a drawback or not. https://www.bitmaintech.com/productDetail.htm?pid=00020150124112513358te42YNfK0683I know that doesn't really answer any of your questions. But the best answer to anyone saying "I want to buy this thing from BFL" is "you should really do something else, because that's one of the worst decisions you can make with regard to acquiring mining hardware". Their Monarchs are overpriced and unreliable, and though they may be selling new orders from stock I bet there's still people with preorders 15 months old that haven't been delivered yet. BFL really seems to not care at all about servicing customers properly. |
|
|
|
|
|
needFREElunch
Full Member
Offline
Activity: 196
Merit: 100
Hi
|
|
March 28, 2015, 04:23:57 PM |
|
From the looks of it it has a all in one water cooler so if you wanted to connect them all to a central one you would need to find a waterblock that fit it and use that as the one it comes with can not be disassembled. I have had one of the same ones on my computer and I wanted to expand it but then found out that I needed to build a custom one to do that.
|
|
|
|
|
Bicknellski
|
|
March 28, 2015, 04:25:11 PM |
|
No no just NO. Seriously. You are not getting value for money Buy 3 and I'll ship (within the US) for free.  what is the power consumption of each one?? i guess send me the consumption of one with a working fan so i have correct numbers. i coulda sworn i saw something about it being .5w per gh or somewhat lower then that but when i looked on their site the numbers were much higher at .7-.8w per gh which is weird because they claim its a top contender for efficient mining which is deff a lie and has been long before they actually started shipping them so do urs have numbers around the first set or around the second set?? If you underclock them they get 0.5w/GH but then they only get about 450gh/s each. They also don't get hot like that. This is how I'm running them now, but I need to make room for faster equipment. |
|
|
|
Syke
Legendary
Offline
Activity: 3878
Merit: 1193
|
|
March 28, 2015, 04:30:11 PM |
|
Stay away from BFL products. They are too expensive, use too much electricity, are too slow, are prone to failure and leaking, and are from a company that will likely not be in business to support the product in a few months. You'll just be wasting your money like so many people before you.
|
Buy & Hold
|
|
|
unamis76
Legendary
Offline
Activity: 1512
Merit: 1009
|
|
March 28, 2015, 04:30:41 PM |
|
You seem to be new around here, so here it goes: https://bitcointalk.org/index.php?topic=150803.0Please, just don't buy from BFL, ever. Whatever their product is... You risk getting nothing, and you're not buying that much anyways. |
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
March 28, 2015, 04:33:18 PM |
|
Look at some of the other current tech SP20, S5, Avalon 4.1 etc.
You can run with a underclock if you want quiet. But I would personally never order from BFL.
|
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
March 28, 2015, 04:42:35 PM |
|
Look at some of the other current tech SP20, S5, Avalon 4.1 etc.
You can run with a underclock if you want quiet. But I would personally never order from BFL.
SP20s you'll need to get 2nd hand from other forum users, you'll find listings here: https://bitcointalk.org/index.php?board=75.0Avalon4s you can get from ehash.com S5s from bitmaintech.com |
|
|
|
sbogovac
Legendary
Offline
Activity: 2730
Merit: 1192
I don't believe in denial.
|
|
March 28, 2015, 04:45:31 PM |
|
Hi,
I want to get the monarch cards [...] Why...  In God's name: why?!? Why would anyone in his right mind want anything to do with BFL...  |
0x7442A5c37E513D335F53843cD20c00F77eAC7867
|
|
|
|
subseaguru
|
|
March 28, 2015, 05:02:12 PM |
|
Look at some of the other current tech SP20, S5, Avalon 4.1 etc.
You can run with a underclock if you want quiet. But I would personally never order from BFL.
SP20s you'll need to get 2nd hand from other forum users, you'll find listings here: https://bitcointalk.org/index.php?board=75.0Avalon4s you can get from ehash.com S5s from bitmaintech.com how are those avalon 4s miners? |
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7863
'The right to privacy matters'
|
|
March 28, 2015, 05:05:49 PM |
|
Guys chances are 66.6% that the op is a BFL shill.
BFL has been sending me emails to buy a monarch for the last 2 weeks.
To op if you are real send me a pm and I will sell you a sp20e and a psu to boot for a good price.
If you are a shill for BFL I hope you get rectal, penile and testicular cancer over the next 6 months.
Ps that is how bad BFL truly is.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7863
'The right to privacy matters'
|
|
March 28, 2015, 05:08:55 PM |
|
Look at some of the other current tech SP20, S5, Avalon 4.1 etc.
You can run with a underclock if you want quiet. But I would personally never order from BFL.
SP20s you'll need to get 2nd hand from other forum users, you'll find listings here: https://bitcointalk.org/index.php?board=75.0Avalon4s you can get from ehash.com S5s from bitmaintech.com how are those avalon 4s miners? I own 3 of them here is a screen shot of them mining as I type. Well built about .56 watts a gh see screen shot below. 1 problem they are costly.1400 watts at a kwatt meter does the 3 of them. I have an evga 1600 p2 running them  |
|
|
|
|
subseaguru
|
|
March 28, 2015, 05:38:27 PM |
|
[/quote]
I own 3 of them here is a screen shot of them mining as I type. Well built about .56 watts a gh see screen shot below. 1 problem they are costly.
1400 watts at a kwatt meter does the 3 of them. I have an evga 1600 p2 running them
[/quote]
im going to look into them a little more soon. thanks for the screenshot.
|
|
|
|
sidehack
Legendary
Offline
Activity: 3318
Merit: 1848
Curmudgeonly hardware guy
|
|
March 28, 2015, 06:06:27 PM |
|
Yeah it's too bad there's no Avalon US reseller. The prices aren't terrible but the overseas shipping kills. If someone fetched in bulk and resold they could probably do good business. I've been wanting to grab one of those since the first pictures of innards were released but haven't been able to bite the bullet on it yet.
Also, suggesting SP20, S5 or Avalon4 don't really help with his desire for not using aircooling, unless you also grab kits and refit S5 on waterblocks.
|
|
|
|
|
nokati (OP)
|
|
March 28, 2015, 08:24:12 PM |
|
Guys chances are 66.6% that the op is a BFL shill.
BFL has been sending me emails to buy a monarch for the last 2 weeks.
To op if you are real send me a pm and I will sell you a sp20e and a psu to boot for a good price.
If you are a shill for BFL I hope you get rectal, penile and testicular cancer over the next 6 months.
Ps that is how bad BFL truly is.
lol, no I am not working for BFL. Its complicated to explain, but as monarch "looks like" a video card its easier for me to get it in the country that I am planning to setup an small farm. My elec cost is pretty low but getting the miners to the country is not a simple task. I can maybe get the S5 boards and import as seconde hand pc parts, but then I need to find a solution for cooling. Is there any way to get the S5 on water cooling? The place I want to do mining is very dusty. 3 fans of my S4 are now death after 3 weeks!!! and I am pretty sure that the S4 is also probably death. I cant get to it right now but I can see the dust and the death fans on the remote cam. my best and first bet is antminer s5 but I need to find a good water cooling solution for it. I havent find any watercooling heatsink on the web that is that big to cover the boards of S5. Give a good solution for S5 water cooling and I am all ears. I dont even need to recycle the water as it almost free  and my electric is almost free to  I am strangling for almost 2-3 months now and not getting any closer to my goal. |
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
March 28, 2015, 08:28:31 PM |
|
Guys chances are 66.6% that the op is a BFL shill.
BFL has been sending me emails to buy a monarch for the last 2 weeks.
To op if you are real send me a pm and I will sell you a sp20e and a psu to boot for a good price.
If you are a shill for BFL I hope you get rectal, penile and testicular cancer over the next 6 months.
Ps that is how bad BFL truly is.
lol, no I am not working for BFL. Its complicated to explain, but as monarch "looks like" a video card its easier for me to get it in the country that I am planning to setup an small farm. My elec cost is pretty low but getting the miners to the country is not a simple task. I can maybe get the S5 boards and import as seconde hand pc parts, but then I need to find a solution for cooling. Is there any way to get the S5 on water cooling? The place I want to do mining is very dusty. 3 fans of my S4 are now death after 3 weeks!!! and I am pretty sure that the S4 is also probably death. I cant get to it right now but I can see the dust and the death fans on the remote cam. my best and first bet is antminer s5 but I need to find a good water cooling solution for it. I havent find any watercooling heatsink on the web that is that big to cover the boards of S5. Give a good solution for S5 water cooling and I am all ears. I dont even need to recycle the water as it almost free and my electric is almost free to I am strangling for almost 2-3 months now and not getting any closer to my goal. What country are you trying to ship to? Keep in mind even if it looks like a video card, chances are the papers will say bitcoin miner. Also adding water cooling is expensive and will add to ROI time considerable. C1 is the cheapest option on water cooled. Also keep in mind if you plan on a small farm BFL is not who I would want to deal with if any problems. |
|
|
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7863
'The right to privacy matters'
|
|
March 28, 2015, 10:00:39 PM |
|
|
|
|
|
needFREElunch
Full Member
Offline
Activity: 196
Merit: 100
Hi
|
|
March 28, 2015, 10:20:17 PM |
|
If you water cool your boards with custom water cooling you might be able to get a better bang for you buck if you are cooling enough boards. Because you will only need one pump and a couple of rads and a water block for each board and have them all in one water cooling loop, you might even save power because you wont have a pump on each board.
|
|
|
|
|
