notlist3d (OP)
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
April 12, 2015, 02:42:30 AM |
|
I don't think a Raspberry Pi USB does well with an unpowered hub. The power that a Raspberry Pi USB port can supply is very limited. While it may have worked with 1 device, and the hub itself, adding devices will just drag down the +5V that the Raspberry Pi tries to supply to the hub. Maybe the Avalon is REALLY low current and it will all work just fine. I just know things get unreliable real quick when the +5V on a Raspberry Pi isn't nice and well regulated at 5.0 (or a smidge higher). I had a variety of reliability problems with a Raspberry Pi setup and a hub, and they all just disappeared when I supplied the hub and the Pi from an ATX +5v line. Fighting power problems is REALLY frustrating in my experience.
That might be a issue if it was a USB stick miner and getting power from it. But it seems to work fine with a unpowered with one perfect. Hopefully in a week or two I have the more units and can confirm it works fine with regular non-powered usb hub. But if needed I have a few from the ASIC Miner stick miner days in my parts I can use.
|
|
|
|
RealMalatesta
Legendary
Offline
Activity: 2338
Merit: 1124
|
|
April 12, 2015, 11:34:46 AM |
|
They promote these miners with "Avalon4.1 4.2T Suite". Okay, 4.2 Th.... They also write: "Mining speed can reach 1.3THs". So 3*1.3=3.9 Where are the missing 0.3 th/s?
So in the best of all cases, you get 3.9 Th/s for 6 BTC. But still have to buy PSUs. Has anybody ever reached 3.9?
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8508
'The right to privacy matters'
|
|
April 12, 2015, 01:21:13 PM |
|
They promote these miners with "Avalon4.1 4.2T Suite". Okay, 4.2 Th.... They also write: "Mining speed can reach 1.3THs". So 3*1.3=3.9 Where are the missing 0.3 th/s?
So in the best of all cases, you get 3.9 Th/s for 6 BTC. But still have to buy PSUs. Has anybody ever reached 3.9?
Okay these miners are all about quiet not hashrate. I can get as high as 1.2th but like spondoolies sp20's higher clocks burn more power per gh. So if you have free power and want to overclock them tell me I will do a 2 unit 6 hour overclock test for you. I am at 1637 and 880 watts for 2 units as sound is my absolute most important issue. next is power I am at 0.5375 watts a gh here I am on a freq 20.94 2 unit under clock
|
|
|
|
RealMalatesta
Legendary
Offline
Activity: 2338
Merit: 1124
|
|
April 12, 2015, 01:35:05 PM |
|
They promote these miners with "Avalon4.1 4.2T Suite". Okay, 4.2 Th.... They also write: "Mining speed can reach 1.3THs". So 3*1.3=3.9 Where are the missing 0.3 th/s?
So in the best of all cases, you get 3.9 Th/s for 6 BTC. But still have to buy PSUs. Has anybody ever reached 3.9?
Okay these miners are all about quiet not hashrate. I can get as high as 1.2th but like spondoolies sp20's higher clocks burn more power per gh. So if you have free power and want to overclock them tell me I will do a 2 unit 6 hour overclock test for you. I am at 1637 and 880 watts for 2 units as sound is my absolute most important issue. next is power I am at 0.5375 watts a gh here I am on a freq 20.94 2 unit under clock If the noise is the issue, they should promote this - but they do promote the hashrate. It's as if I sell you a house with five rooms, but you see it has only four, and the seller tells you with some bricks and skills, you can build a fifth room - maybe. But never mind, the main issue is that the house has four doors.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8508
'The right to privacy matters'
|
|
April 12, 2015, 02:02:05 PM |
|
They promote these miners with "Avalon4.1 4.2T Suite". Okay, 4.2 Th.... They also write: "Mining speed can reach 1.3THs". So 3*1.3=3.9 Where are the missing 0.3 th/s?
So in the best of all cases, you get 3.9 Th/s for 6 BTC. But still have to buy PSUs. Has anybody ever reached 3.9?
Okay these miners are all about quiet not hashrate. I can get as high as 1.2th but like spondoolies sp20's higher clocks burn more power per gh. So if you have free power and want to overclock them tell me I will do a 2 unit 6 hour overclock test for you. I am at 1637 and 880 watts for 2 units as sound is my absolute most important issue. next is power I am at 0.5375 watts a gh here I am on a freq 20.94 2 unit under clock If the noise is the issue, they should promote this - but they do promote the hashrate. It's as if I sell you a house with five rooms, but you see it has only four, and the seller tells you with some bricks and skills, you can build a fifth room - maybe. But never mind, the main issue is that the house has four doors. Okay I tell you what I will set it higher and see what we can mine. I bumped freq from 20.94 to 26.74 I am running 1 not 2 units.
|
|
|
|
RealMalatesta
Legendary
Offline
Activity: 2338
Merit: 1124
|
|
April 12, 2015, 02:22:08 PM |
|
They promote these miners with "Avalon4.1 4.2T Suite". Okay, 4.2 Th.... They also write: "Mining speed can reach 1.3THs". So 3*1.3=3.9 Where are the missing 0.3 th/s?
So in the best of all cases, you get 3.9 Th/s for 6 BTC. But still have to buy PSUs. Has anybody ever reached 3.9?
Okay these miners are all about quiet not hashrate. I can get as high as 1.2th but like spondoolies sp20's higher clocks burn more power per gh. So if you have free power and want to overclock them tell me I will do a 2 unit 6 hour overclock test for you. I am at 1637 and 880 watts for 2 units as sound is my absolute most important issue. next is power I am at 0.5375 watts a gh here I am on a freq 20.94 2 unit under clock If the noise is the issue, they should promote this - but they do promote the hashrate. It's as if I sell you a house with five rooms, but you see it has only four, and the seller tells you with some bricks and skills, you can build a fifth room - maybe. But never mind, the main issue is that the house has four doors. Okay I tell you what I will set it higher and see what we can mine. I bumped freq from 20.94 to 26.74 I am running 1 not 2 units. But don't burn your house down! I don't want to have trouble with your wife!!!
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8508
'The right to privacy matters'
|
|
April 12, 2015, 10:31:01 PM |
|
They promote these miners with "Avalon4.1 4.2T Suite". Okay, 4.2 Th.... They also write: "Mining speed can reach 1.3THs". So 3*1.3=3.9 Where are the missing 0.3 th/s?
So in the best of all cases, you get 3.9 Th/s for 6 BTC. But still have to buy PSUs. Has anybody ever reached 3.9?
Okay these miners are all about quiet not hashrate. I can get as high as 1.2th but like spondoolies sp20's higher clocks burn more power per gh. So if you have free power and want to overclock them tell me I will do a 2 unit 6 hour overclock test for you. I am at 1637 and 880 watts for 2 units as sound is my absolute most important issue. next is power I am at 0.5375 watts a gh here I am on a freq 20.94 2 unit under clock If the noise is the issue, they should promote this - but they do promote the hashrate. It's as if I sell you a house with five rooms, but you see it has only four, and the seller tells you with some bricks and skills, you can build a fifth room - maybe. But never mind, the main issue is that the house has four doors. Okay I tell you what I will set it higher and see what we can mine. I bumped freq from 20.94 to 26.74 I am running 1 not 2 units. But don't burn your house down! I don't want to have trouble with your wife!!! Yeah neither do I!! 2 units now 2 psu's each about 800 watts so 1600 watts total for 2300 gh or .69 watts per gh. So just like the sp20 power use jumps faster then the hash rate. I was 1600 gh and 860 watts = .5375 watts per gh I am not sure I want to push past the present settings. note I cranked the volts to 8625. gear is still pretty quiet Now 2308 gh and 1600 watts = .69 watts per gh
|
|
|
|
notlist3d (OP)
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
April 13, 2015, 10:23:00 PM |
|
Quick shipping from Ehash. Now I am up to a set of three. It is working good it appears by just plugging them in usb hub. Have some testing to do so I can add more info
|
|
|
|
valkir
Legendary
Offline
Activity: 1484
Merit: 1004
|
|
April 13, 2015, 11:31:32 PM |
|
Sweet! I wish I had 3 avalon!
|
██ Please support sidehack with his new miner project Send to :
1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8508
'The right to privacy matters'
|
|
April 13, 2015, 11:45:28 PM |
|
Quick shipping from Ehash. Now I am up to a set of three. It is working good it appears by just plugging them in usb hub. Have some testing to do so I can add more info So you went to the hub and did not daisy-chain?
|
|
|
|
notlist3d (OP)
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
April 13, 2015, 11:53:28 PM |
|
Quick shipping from Ehash. Now I am up to a set of three. It is working good it appears by just plugging them in usb hub. Have some testing to do so I can add more info So you went to the hub and did not daisy-chain? Correct I had a cheap hub. Just used it. It's a non-powered hub. So far it seems to work great with the 3 of them.
|
|
|
|
notlist3d (OP)
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
April 14, 2015, 03:40:38 AM |
|
So far the 2 new miners are working great with the first one. Below is a image of the three running a little underclock.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8508
'The right to privacy matters'
|
|
April 14, 2015, 04:14:32 AM |
|
yeah that is a good speed mid 900's > I am doing a speed test on my 2. these start pulling a lot of power on the higher clocks. note the volts are set at 8750 that is 9.375 percent over stock of 8000 I just wired 1 socket for 240 volts about time. I am using an evga 1600 p2 for 1 unit and an Intel server psu 1200 watts at 240 volts along with 94% efficiency. It is still not too bad for sound, I think I could squeeze out 2650 or 2700gh for 2 units ,but the power cost makes it a dumb thing for me. I know some people want to max gear due to free power. look at my errors and my temps these can do more then 1260 each like they are doing here.
|
|
|
|
notlist3d (OP)
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
April 14, 2015, 04:19:10 AM |
|
That is a nice speed on 2 units. I to can't make it work out with price of electricity. I was able to get all 3 of mine on a single 110 circuit with underclock.
I'm using gold power supplies, but still very happy to get it all on 1 110 circuit. I am looking into changing a lot with my summer mining area. Still working to add airflow, I want to run this summer without using AC on miners.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8508
'The right to privacy matters'
|
|
April 14, 2015, 04:20:41 AM |
|
That is a nice speed on 2 units. I to can't make it work out with price of electricity. I was able to get all 3 of mine on a single 110 circuit with underclock.
I'm using gold power supplies, but still very happy to get it all on 1 110 circuit. I am looking into changing a lot with my summer mining area. Still working to add airflow, I want to run this summer without using AC on miners.
Yeah I am losing money or breaking even, but I will do it for a day to help people get an idea of the top end limits.
|
|
|
|
Xircom
Legendary
Offline
Activity: 938
Merit: 1000
|
|
April 14, 2015, 09:48:56 AM |
|
Nice findings. Looking forward to your results on the 1.2TH area. findings....Could the Avalon be the one that should be standing next to my SP20 `s ?
|
BTC: 1MyJmxS9ER5ZBNvpG3LhoUXGotpzbPowed
|
|
|
notlist3d (OP)
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
April 14, 2015, 09:06:02 PM |
|
Been testing 3 for a little less then 24 hours. So far running great as far as stability. Again I am using a Raspberry Pi to control them, it is working out great.
More to come I have been documenting this from unpacking till now.
|
|
|
|
notlist3d (OP)
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
April 15, 2015, 05:13:53 AM |
|
Three Avalon 4.1's so far happily mining together. I would consider very stable at this point. Need to add some lighting I appolgize it's darker then I originally thought.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8508
'The right to privacy matters'
|
|
April 15, 2015, 05:17:18 AM |
|
nice are they the silver or black models.
|
|
|
|
notlist3d (OP)
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
April 15, 2015, 05:32:43 AM |
|
nice are they the silver or black models.
All 3 are Silver 4.1 models. I will get better pictures tomorrow with more lighting.
|
|
|
|
|