MAJOR HELP NEEDED ... 1TH Dragon Miner not working ??

[rowl3y]

Hi all, I hope someone can help me here ..

I have access to the page to set the works and the network .. When I click confirm to start the miner LED goes red .. then goes off again ..

The page that shows the stats just shows error's

Error getting device list: ERR: socket connect(0) failed

pool's page

rror getting version for 127.0.0.1:4028 ERR: socket connect(127.0.0.1:4028) failed


Hope someone can help

[1715305166]

1715305166

[1715305166]

1715305166

[Meech]

127.0.0.1 is your local network.  Socket has to do with your network as well.  Is your routers ip 192.168.1.1?  If not make sure your ip's are seeing your network.  Don't know for sure how to help but it's your network setup for sure.

[notlist3d]

Hi all, I hope someone can help me here ..

I have access to the page to set the works and the network .. When I click confirm to start the miner LED goes red .. then goes off again ..

The page that shows the stats just shows error's

Error getting device list: ERR: socket connect(0) failed

pool's page

rror getting version for 127.0.0.1:4028 ERR: socket connect(127.0.0.1:4028) failed


Hope someone can help

Make sure as meech said all network information at top is correct.  You might take a screenshot of configuration page and we could help more.

The error of "Error getting device list: ERR: socket connect(0) failed" can be caused by many things.  Again a screenshot of configuration and a little about your network will help.

[wh00per]

127.0.0.1 is the loopback to localhost, not local network. Anyway, make sure all USB cables make contact and plug in correctly inside. you should have LEDs lit on/for all boards.

CGminer does not start because it does not detect the boards an therefore the CGminer API on port 4028 does not start either .. and so the UI can't connect to it.

Quite a story.

and .. you're not the only one having major issues with the dragons (or innosilicon) .. https://bitcointalk.org/index.php?topic=641400.0

[notlist3d]

127.0.0.1 is the loopback to localhost, not local network. Anyway, make sure all USB cables make contact and plug in correctly inside. you should have LEDs lit on/for all boards.

CGminer does not start because it does not detect the boards an therefore the CGminer API on port 4028 does not start either .. and so the UI can't connect to it.

Quite a story.

and .. you're not the only one having major issues with the dragons (or innosilicon) .. https://bitcointalk.org/index.php?topic=641400.0

I have not seen one with usb I don't think.  There is normally a raspberry pi within it and a secondary board with a mortheboard plug that the hashing blades go to (in later models 4 bladess).

[wh00per]

... a mortheboard plug that the hashing blades go to (in later models 4 bladess).

.. they go there via USB at least in my case ..

[notlist3d]

... a mortheboard plug that the hashing blades go to (in later models 4 bladess).

.. they go there via USB at least in my case ..

Mine was via some different cables.  It was one of the old dragons with a LCD.  Maybe they improved it since then.