[ANN]AIB-Advanced Internet Blockchains || https://www.aib.one

[crackfoo]

thanks for info,

plz share the link to the aibwallet v.0.13 source

https://github.com/iobond/aib

master branch for now

will STEX re-enable AIB?

[aib]

thanks for info,

plz share the link to the aibwallet v.0.13 source

https://github.com/iobond/aib

master branch for now

will STEX re-enable AIB?

We only on STEX with AIB/ETH pair.
https://app.stex.com/en/basic-trade/pair/ETH/AIB

BTC pair is here, however, there is no liquidation yet. might  be soon
https://txbit.io/Trade/AIB/BTC

[minerja]

thanks for info,

plz share the link to the aibwallet v.0.13 source

https://github.com/iobond/aib

master branch for now

Can you please give direct link to the Windows Compiled version....Thanks

[aib]

thanks for info,

plz share the link to the aibwallet v.0.13 source

https://github.com/iobond/aib

master branch for now

Can you please give direct link to the Windows Compiled version....Thanks

https://github.com/iobond/aib/releases/download/qtwallet0.14/aib-qt_2020-02-12.zip

[minerja]

thanks for info,

plz share the link to the aibwallet v.0.13 source

https://github.com/iobond/aib

master branch for now

Can you please give direct link to the Windows Compiled version....Thanks

https://github.com/iobond/aib/releases/download/qtwallet0.14/aib-qt_2020-02-12.zip

Thankyou

[aib]

thanks for info,

plz share the link to the aibwallet v.0.13 source

https://github.com/iobond/aib

master branch for now

will STEX re-enable AIB?

Does your HashTap  support sCrypt merge mining with a low cost?

[psycodad]

What is the current wallet version or github tag to use?

I am getting

Code:

  "warnings": "Warning: Unknown block versions being mined! It's possible unknown rules are in effect"

TIA

We have attemp a failed upgrade to 0.17. so now down grage to 0.13 for now for stable version.

Thanks, but with v5.13.3.17 I am unable to deposit coins into stex and master doesn't compile on any of my platforms:

Code:

configure.ac:32: installing 'build-aux/missing'
configure.ac:1111: error: required file 'qa/pull-tester/run-bitcoind-for-test.sh.in' not found
configure.ac:1112: error: required file 'qa/pull-tester/tests_config.py.in' not found
configure.ac:1114: error: required file 'qa/pull-tester/rpc-tests.py' not found
Makefile.am:10: warning: user variable 'GZIP_ENV' defined here ...
/usr/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here
src/Makefile.am: installing 'build-aux/depcomp'
src/Makefile.am:465: warning: user target '.mm.o' defined here ...
/usr/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here
parallel-tests: installing 'build-aux/test-driver'
autoreconf: automake failed with exit status: 1

[aib]

What is the current wallet version or github tag to use?

I am getting

Code:

  "warnings": "Warning: Unknown block versions being mined! It's possible unknown rules are in effect"

TIA

We have attemp a failed upgrade to 0.17. so now down grage to 0.13 for now for stable version.

Thanks, but with v5.13.3.17 I am unable to deposit coins into stex and master doesn't compile on any of my platforms:

Code:

configure.ac:32: installing 'build-aux/missing'
configure.ac:1111: error: required file 'qa/pull-tester/run-bitcoind-for-test.sh.in' not found
configure.ac:1112: error: required file 'qa/pull-tester/tests_config.py.in' not found
configure.ac:1114: error: required file 'qa/pull-tester/rpc-tests.py' not found
Makefile.am:10: warning: user variable 'GZIP_ENV' defined here ...
/usr/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here
src/Makefile.am: installing 'build-aux/depcomp'
src/Makefile.am:465: warning: user target '.mm.o' defined here ...
/usr/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here
parallel-tests: installing 'build-aux/test-driver'
autoreconf: automake failed with exit status: 1

Check the master branch or aib-5.14 branch.
Version inside should be v5.13.3.14
there is a build-linux.sh script

later we might buid a dockerfile for easier build from souce for AIB .

[aib]

Welcome to join our tournament team on Binance.

https://www.binance.com/en/futures/activity/tournament/AIB%E4%B8%80%E5%B8%A6%E4%B8%80%E8%B7%AF%E5%9B%A2

https://pasteboard.co/J3ldc7P.png

[psycodad]

What is the current wallet version or github tag to use?

I am getting

Code:

  "warnings": "Warning: Unknown block versions being mined! It's possible unknown rules are in effect"

TIA

We have attemp a failed upgrade to 0.17. so now down grage to 0.13 for now for stable version.

Thanks, but with v5.13.3.17 I am unable to deposit coins into stex and master doesn't compile on any of my platforms:

Code:

configure.ac:32: installing 'build-aux/missing'
configure.ac:1111: error: required file 'qa/pull-tester/run-bitcoind-for-test.sh.in' not found
configure.ac:1112: error: required file 'qa/pull-tester/tests_config.py.in' not found
configure.ac:1114: error: required file 'qa/pull-tester/rpc-tests.py' not found
Makefile.am:10: warning: user variable 'GZIP_ENV' defined here ...
/usr/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here
src/Makefile.am: installing 'build-aux/depcomp'
src/Makefile.am:465: warning: user target '.mm.o' defined here ...
/usr/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here
parallel-tests: installing 'build-aux/test-driver'
autoreconf: automake failed with exit status: 1

Check the master branch or aib-5.14 branch.
Version inside should be v5.13.3.14
there is a build-linux.sh script

later we might buid a dockerfile for easier build from souce for AIB .

Thank you, I compiled from git tag v5.13.3.14, deleted the blockchain and resynched from scratch.

Deposits are still not going to stex and while my block height is # 2409994, the block explorer shows a height of # 2302253.

I guess there are a number of forks running meanwhile and I am unsure on how to get synched properly to send my coins to stex.

[aib]

What is the current wallet version or github tag to use?

I am getting

Code:

  "warnings": "Warning: Unknown block versions being mined! It's possible unknown rules are in effect"

TIA

We have attemp a failed upgrade to 0.17. so now down grage to 0.13 for now for stable version.

Thanks, but with v5.13.3.17 I am unable to deposit coins into stex and master doesn't compile on any of my platforms:

Code:

configure.ac:32: installing 'build-aux/missing'
configure.ac:1111: error: required file 'qa/pull-tester/run-bitcoind-for-test.sh.in' not found
configure.ac:1112: error: required file 'qa/pull-tester/tests_config.py.in' not found
configure.ac:1114: error: required file 'qa/pull-tester/rpc-tests.py' not found
Makefile.am:10: warning: user variable 'GZIP_ENV' defined here ...
/usr/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here
src/Makefile.am: installing 'build-aux/depcomp'
src/Makefile.am:465: warning: user target '.mm.o' defined here ...
/usr/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here
parallel-tests: installing 'build-aux/test-driver'
autoreconf: automake failed with exit status: 1

Check the master branch or aib-5.14 branch.
Version inside should be v5.13.3.14
there is a build-linux.sh script

later we might buid a dockerfile for easier build from souce for AIB .

Thank you, I compiled from git tag v5.13.3.14, deleted the blockchain and resynched from scratch.

Deposits are still not going to stex and while my block height is # 2409994, the block explorer shows a height of # 2302253.

I guess there are a number of forks running meanwhile and I am unsure on how to get synched properly to send my coins to stex.

remove  blocks & chainstate

download part 1, part 2 from :
https://github.com/iobond/aib/releases

then :
cat aib-block-2211080.tar.gz.xz.00? > aib-block-2211080.tar.gz.xz
xz -d aib-block-2211080.tar.gz.xz
tar xf aib-block-2211080.tar.gz

config aib.conf :

connect = 104.238.153.71:31415
then start aibd

after on the right chain then could remove the connect if necessary.

[psycodad]

remove  blocks & chainstate

download part 1, part 2 from :
https://github.com/iobond/aib/releases

then :
cat aib-block-2211080.tar.gz.xz.00? > aib-block-2211080.tar.gz.xz
xz -d aib-block-2211080.tar.gz.xz
tar xf aib-block-2211080.tar.gz

config aib.conf :

connect = 104.238.153.71:31415
then start aibd

after on the right chain then could remove the connect if necessary.

Thanks for your reply.
I can confirm I am now on same height as block explorer and my desposits show up on stex.

[aib]

remove  blocks & chainstate

download part 1, part 2 from :
https://github.com/iobond/aib/releases

then :
cat aib-block-2211080.tar.gz.xz.00? > aib-block-2211080.tar.gz.xz
xz -d aib-block-2211080.tar.gz.xz
tar xf aib-block-2211080.tar.gz

config aib.conf :

connect = 104.238.153.71:31415
then start aibd

after on the right chain then could remove the connect if necessary.

Thanks for your reply.
I can confirm I am now on same height as block explorer and my desposits show up on stex.

Nice,

[aib]

ADD Windows Wallet, come with recent blockdata in one package:

https://github.com/iobond/aib/releases/tag/AIBWin64Installer

[aib]

Download full blockdata recently faster in China:

https://pan.baidu.com/s/1BoQuwOxur6U-9ActRMwMXw
提取码：vlpo

[aib]

Thanks ZergPool to merge mining AIB to support its network security.

https://zergpool.com/site/block?id=3353

[rubinas9]

Hello,
I am trying to install it on yiimp pool but unfortunately starting with ./autogen.sh it ends with

configure.ac:1111: error: required file 'qa/pull-tester/run-bitcoind-for-test.sh.in' not found
configure.ac:1112: error: required file 'qa/pull-tester/tests_config.py.in' not found
configure.ac:1114: error: required file 'qa/pull-tester/rpc-tests.py' not found
Makefile.am:10: warning: user variable 'GZIP_ENV' defined here ...
/usr/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here
src/Makefile.am: installing 'build-aux/depcomp'
src/Makefile.am:465: warning: user target '.mm.o' defined here ...
/usr/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here
autoreconf: automake failed with exit status: 1

Libtoolize did not help.

Somebody have an advice?

[aib]

Hello,
I am trying to install it on yiimp pool but unfortunately starting with ./autogen.sh it ends with

configure.ac:1111: error: required file 'qa/pull-tester/run-bitcoind-for-test.sh.in' not found
configure.ac:1112: error: required file 'qa/pull-tester/tests_config.py.in' not found
configure.ac:1114: error: required file 'qa/pull-tester/rpc-tests.py' not found
Makefile.am:10: warning: user variable 'GZIP_ENV' defined here ...
/usr/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here
src/Makefile.am: installing 'build-aux/depcomp'
src/Makefile.am:465: warning: user target '.mm.o' defined here ...
/usr/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here
autoreconf: automake failed with exit status: 1

Libtoolize did not help.

Somebody have an advice?

Try this:


For your convenience , we made a dockerfile to help you build, and
also the blockdata to help you to fast sync up.

------ Dockerfile -----------------
https://github.com/iobond/aib/releases/download/aib-dockerfile/aib-dockerfile.tar.gz

Compile from AIB source's Dockerfile.

mkdir compile-aib
cd compile-aib
tar xf aib-dockerfile.tar.gz
./start.sh
ls -lah ./release

Will have your compiled aib binary for ubuntu 16.04

--------------------  Blockdata ------------

https://github.com/iobond/aib/releases/download/Blockdata-2211080/aib-block-2211080.tar.gz.xz.001
https://github.com/iobond/aib/releases/download/Part-2-Block-2211080/aib-block-2211080.tar.gz.xz.002


Block data for AIB @ Height 2211080

There is 2 parts of the file , combine into one then decompress than
you could get the block data around 2.6G

cat aib-block-2211080.tar.gz.xz.00? > aib-block-2211080.tar.gz.xz
xz -d aib-block-2211080.tar.gz.xz
tar xf aib-block-2211080.tar.gz

when you init the sync, please use in aib.conf
connect=connect.aib.one

to make sure you are on the right chain

[rubinas9]

Thank you very much for very detailed information. It already on my pool

[aib]

Thank you very much for very detailed information. It already on my pool

could you mention here, what's your pool? is it a public pool? do you want me to put on the list ?