disq (OP)
Newbie
Offline
Activity: 41
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/grin.gif) |
May 27, 2011, 06:12:38 PM Last edit: May 29, 2011, 10:58:16 AM by disq |
|
I've been developing this get-hashrate-generate-graphs solution since yesterday, it's finally at a releaseable stage. Grab it from GitHubRequirements: php-cli and rrdtool (and working aticonfig) Webserver is not required in mining rigs or even at all (You can look at the graphs via sftp etc. if you want, or you can generate the graphs on a separate box which has a webserver running) Auto-detects the cards you have installed and generates a config file, which then you can edit and rename the cards, turn off the fan display (maybe that particular card doesn't report fan speed correctly for some reason) etc. To get the hashrate, you need a patch to Phoenix miner. Other miners are not supported right now, but it also supports a 'hashrate' file to read the hash rate from. Details in the README. Unfortunately won't work on windows since it heavily depends on aticonfig. WARNINGIf running getstatus.php or update.php takes more than 2 seconds for you, or you get occasional gpu at 0% reports (jitters in the charts, etc) you should disable fan monitoring for now. Edit your config.json file and change the "fan":"yes" lines (there are one for each card) to "fan":"no". Sample GraphsHashrate (Two rigs) https://i.imgur.com/kWVDJ.pngHashrate (Rigs combined) https://i.imgur.com/SuRjv.pngGPU Load https://i.imgur.com/0LyOn.pngShares Submitted https://i.imgur.com/82ThX.pngIndividual Load vs. Fan vs. Temp Graphs for each card https://i.imgur.com/cMvJg.pngPlanned Features & Known Bugs- Event notifications (Send e-mail when cards are idle etc)
- Needs better colors
- Check why shares submitted graph doesn't always make sense
- Possible bug in gen-rrd (The RRA's created might be way off)
- Fix fan monitoring, possibly by switching to ADL instead of aticonfig
|
|
|
|
memvola
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2011, 11:48:54 PM |
|
I put this on a remote rig and it's reporting everything I need. I'll have to wait to see if "Shares Submitted" is working correctly, but overall it's a very useful tool. Thank you! who tips to forum signatures anyway? I did. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
PcChip
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2011, 12:05:47 AM |
|
Maybe Jeffrey Lebowski can use this program to make sure his rug is never stolen again
|
Legacy signature from 2011: All rates with Phoenix 1.50 / PhatK 5850 - 400 MH/s | 5850 - 355 MH/s | 5830 - 310 MH/s | GTX570 - 115 MH/s | 5770 - 210 MH/s | 5770 - 200 MH/s
|
|
|
Anonymous
Guest
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2011, 02:12:07 AM |
|
Heres my rug monitor ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimages.t-nation.com%2Fforum_images%2FfullSize%2Ff%2F7%2Ff7944_ORIG-i_am_monitoring_this_thread.jpg&t=665&c=cbxxK4wDgYIoKg)
|
|
|
|
shat
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2011, 06:25:25 AM |
|
Is there a modification of the patch for phoenix-1.48 yet?
|
|
|
|
mikegogulski
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2011, 11:22:35 AM |
|
Heres my rug monitor ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimages.t-nation.com%2Fforum_images%2FfullSize%2Ff%2F7%2Ff7944_ORIG-i_am_monitoring_this_thread.jpg&t=665&c=cbxxK4wDgYIoKg) I lol'd.
|
|
|
|
disq (OP)
Newbie
Offline
Activity: 41
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2011, 11:41:22 AM |
|
Is there a modification of the patch for phoenix-1.48 yet?
Sorry about that, I've just uploaded a patch for phoenix-1.48. Get it from github, put in phoenix dir, apply with "patch -p1 <logtotext-1.48.diff" ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
mikegogulski
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2011, 11:51:45 AM |
|
This is good stuff, disq. I'm currently thinking about how to modify poclbm output in order to provide input for a Nagios sensor. I'll share it if I come up with anything useful.
|
|
|
|
disq (OP)
Newbie
Offline
Activity: 41
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2011, 08:00:39 PM |
|
I recently tried this with 4 gpus (3 cards) on one box. Fan query seems to be a bottleneck, at least for my setup (sdk 2.1)
If running getstatus.php takes more than 2 seconds for you, or you get occasional gpu at 0% reports (jitters in the charts, etc) you should try disabling fan monitoring.
Edit your config.json file and change "fan":"yes" lines to "fan":"no" and see if it changes anything for you.
|
|
|
|
Ajego
Newbie
Offline
Activity: 56
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 18, 2011, 06:22:08 PM |
|
nice script ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) however i had to set the -t /tmp/* path to the home dir of the user, cause i wanna start phoenix through a script, and so the privilege management was easier. is there a way to create bigger images? i only found the width value, but no height value. you could may add the values to the config?
|
|
|
|
disq (OP)
Newbie
Offline
Activity: 41
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 18, 2011, 08:25:43 PM |
|
nice script ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) however i had to set the -t /tmp/* path to the home dir of the user, cause i wanna start phoenix through a script, and so the privilege management was easier. is there a way to create bigger images? i only found the width value, but no height value. you could may add the values to the config? If you're running from a usb thumb drive, I highly recommend putting the phoenix output to tmpfs, since writes on flash memory are limited. (btw, noticed that in stock debian6, /tmp isn't tmpfs, it just resides on disk. this is bad of usb sticks as well. you can fix this by mounting /tmp as tmpfs in fstab) Anyway, to change the chart configuration, currently one has to edit the gen-graph.php file. In later versions I could make the rrdgraph parameters configurable via the config file. But for now, here's a quick reference from RRDtool website: rrdgraph manpage (Scroll down to "Size" section)
|
|
|
|
Ajego
Newbie
Offline
Activity: 56
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 18, 2011, 09:37:25 PM |
|
ah ok, very easy to edit the script ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) one last question, the "shares submitted" graph shows XXm on the y-axis. where is this value calculated? (i think somewhere around line 220) i thin the 'm' does not stand for 'million' ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
|
Zagitta
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 302
Merit: 100
Presale is live!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2011, 12:46:15 AM |
|
It would be nice if you left the files default setting files there so we could edit them manually rather than have to fight with Apache about write premissions and what not :<
|
|
|
|
PulsedMedia
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2011, 08:06:29 AM |
|
awesome! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Tipped you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Next week it's time to start building our cluster mgmt software and was just thinking howto monitor, thanks for solving it! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Rest should be easy ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
disq (OP)
Newbie
Offline
Activity: 41
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2011, 08:16:08 AM |
|
one last question, the "shares submitted" graph shows XXm on the y-axis. where is this value calculated? (i think somewhere around line 220) i thin the 'm' does not stand for 'million' ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) m is 'milli' (thousandth) the units have SI symbols. The shares submitted graph shows shares per second. The negative Y-axis (below 0) is shares rejected, positive is shares accepted. I had a problem with the shares submitted graph that, sometimes it would get confused and get spikes. Since rrdgraph automatically "zooms out" to view all the data, when this happens the actual shares graph is useless (since it's all zoomed out). Sorry for that, still looking for an explanation/solution. It would be nice if you left the files default setting files there so we could edit them manually rather than have to fight with Apache about write premissions and what not :<
rrdgraph creates new image files with each generation. You could play with 'umask', but it could be easier (depending on your setup) to schedule a chmod each time after gen-graph runs. awesome! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Tipped you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Next week it's time to start building our cluster mgmt software and was just thinking howto monitor, thanks for solving it! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Rest should be easy ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks and good luck! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
tcpip4lyfe
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 19, 2011, 04:09:32 PM |
|
Very cool. Anyone have a Cacti template for it?
|
|
|
|
cyberchriss
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2011, 08:24:05 AM |
|
very nice scripting ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I am using manual patched phoenix 1.50. I noticed, that hasrates per device values were incorrect. (rates were too low) I am not very familiar in php coding but I found this line in update.php line 25 if (is_array($st) && time() - $st['timestamp']<3) I increased the value from 3 to 15 seconds and now the rates seem to be correct. Is there a reason, why you set the interval of file change date so low?
|
|
|
|
disq (OP)
Newbie
Offline
Activity: 41
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2011, 10:46:55 AM |
|
very nice scripting ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I am using manual patched phoenix 1.50. I noticed, that hasrates per device values were incorrect. (rates were too low) I am not very familiar in php coding but I found this line in update.php line 25 if (is_array($st) && time() - $st['timestamp']<3) I increased the value from 3 to 15 seconds and now the rates seem to be correct. Is there a reason, why you set the interval of file change date so low? fyi, the 1.48 patch can be applied to 1.50 as well. the reason behind that code is the assumption that if the stats isn't updated within the last 3 seconds than there's something wrong with the miner, maybe the card/miner froze or miner is not running. (as phoenix by default updates the file/dumps status every second) of course, if phoenix updates the stats less frequently, this assumption isn't true. are you running phoenix with a custom avgsamples (-a) setting? i should probably extend the time to something like 30 seconds to cover most possibilities.
|
|
|
|
cyberchriss
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 20, 2011, 11:15:50 AM |
|
I start my miners with -t /tmp/gpu1.log -k phatk DEVICE=1 VECTORS BFI_INT AGGRESSION=15 WORKSIZE=64 FASTLOOP=false I have seen in the code, that phoenix dumps the stats every second. When I do a "tail -f /tmp/gpu1.log" I recognized that the file updates irregularly, sometimes with >8s delay. I think 30 seconds for testing phoenix is still alive is okay for most setups. After I changed the time for above setting to 15s, my "shares submitted" Graph do not recognize the shares anymore.
|
|
|
|
|