nitrox
Member
Offline
Activity: 136
Merit: 10
tester
|
|
August 22, 2012, 08:24:41 PM |
|
|
|
|
|
nitrox
Member
Offline
Activity: 136
Merit: 10
tester
|
|
August 22, 2012, 08:26:24 PM |
|
I forgot to mention I use CGMINER 2.7.0 with kernel DIABLO
|
|
|
|
|
freeAgent
|
|
August 23, 2012, 12:49:44 AM |
|
I don't have a cooling problem (card stays below 90c, it's a single-fan model), though your temps in the mid-60s are very impressive. Having essentially an open-air case helps in that regard I built my PC for silence and as long as I stay within acceptable ranges, I'm not too concerned about the temperature. When I'm not mining, you can't tell my computer is on
|
|
|
|
Fiyasko (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
August 23, 2012, 01:26:00 AM |
|
i run two HD 7950 they are different revision but that i run them I hope I was helpful. It would be helpful if you stated your settings, so far i see intensity CG miner 2.7, And diablo kernal, Im using those Like holy hell, Your (according to that chart) hitting 547mh/s with a core of 1070 What is the "powertune" 15? Fwiw im using this card http://www.newegg.ca/Product/Product.aspx?Item=N82E16814150601
|
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
|
August 23, 2012, 01:46:07 AM |
|
Like I said before, I"m using a 7970, not a 7950, but I dropped the "-v 2" arg out, and I got +20MH/s. Try letting CGMiner decide what vectors are best.
|
|
|
|
Fiyasko (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
August 23, 2012, 02:28:56 AM |
|
Like I said before, I"m using a 7970, not a 7950, but I dropped the "-v 2" arg out, and I got +20MH/s. Try letting CGMiner decide what vectors are best.
v 1 seems to work the best, Bringing my memclock upto 1ghz gave me an extra 10mh/s
|
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
|
August 23, 2012, 02:34:46 AM |
|
Well just trying to throw it out there. This thread has me playing with everything I can to get the most MH/s.
|
|
|
|
SysRun
|
|
August 23, 2012, 02:36:50 AM |
|
impressive. is that mineral oil immersed or what?
|
Images are not allowed. As your member rank increases, you can use more types of styling in your signature, and your signature can be longer. See the stickies in Meta for more info. Max 2000; characters remaining: 1781
|
|
|
Fiyasko (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
August 23, 2012, 02:44:03 AM |
|
Well just trying to throw it out there. This thread has me playing with everything I can to get the most MH/s.
woo hoo! impressive. is that mineral oil immersed or what?
Acutually, Shappires latest line of cooling is really good. My XFX is running at core 1080, Mem 800, Fan 73%[4100RPM] Temp 78°C room ambient temp is 27°C Inside a cheap $60 Xion case with 4case fans, 1PSU fan, 1 GPU fan, 1PciSlot CoolerFan for the GPU, One CPU LCU Radiator cooling fan Now with Intensity 7 and 9 giving same results, I am mining at 510Mh/s
|
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
|
August 23, 2012, 02:59:31 AM |
|
I of 7 and 9 gave me similar results, but 13 gave me +10MH/s.
|
|
|
|
nitrox
Member
Offline
Activity: 136
Merit: 10
tester
|
|
August 23, 2012, 06:41:26 AM |
|
i run my two HD7950 with .bat that content: title MINING cd cgminer del *.bin for /F "tokens=1-2 delims=: " %%l in ('time /t') do set hhmm=%%l.%%m TIMEOUT /T 10
cgminer.exe 2>../log/logfile_%date%_%hhmm%.txt -k diablo -o http://pool.ABCPool.co:8332 -u XXXXX -p XX -g 1 -v 1 -w 256 -I 10 --auto-gpu --auto-fan --gpu-dyninterval 5 --gpu-powertune 10,10 --gpu-engine 500-1065,500-1170 --gpu-memclock 915,1020 --temp-target 65 --gpu-fan 42-85 i use logs for detailed monitoring
|
|
|
|
Fiyasko (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
August 23, 2012, 01:54:12 PM |
|
I of 7 and 9 gave me similar results, but 13 gave me +10MH/s.
Seems to have worked... Sortof... It's really bouncy.. dropping 5 below and going 10 above.. Shame how i have to be clocked at 1080 to get the meager 511mhash/s Why the hell is nitrox hitting 54x+ with a 1080 core clock... Im trying to use all the same settings that he's using..
|
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
|
August 23, 2012, 10:26:10 PM |
|
I of 7 and 9 gave me similar results, but 13 gave me +10MH/s.
Seems to have worked... Sortof... It's really bouncy.. dropping 5 below and going 10 above.. Shame how i have to be clocked at 1080 to get the meager 511mhash/s Why the hell is nitrox hitting 54x+ with a 1080 core clock... Im trying to use all the same settings that he's using.. Check your CPU usage. Anything 10 or higher, and I get 100% cpu bug.
|
|
|
|
Fiyasko (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
August 24, 2012, 01:10:30 AM |
|
I of 7 and 9 gave me similar results, but 13 gave me +10MH/s.
Seems to have worked... Sortof... It's really bouncy.. dropping 5 below and going 10 above.. Shame how i have to be clocked at 1080 to get the meager 511mhash/s Why the hell is nitrox hitting 54x+ with a 1080 core clock... Im trying to use all the same settings that he's using.. Check your CPU usage. Anything 10 or higher, and I get 100% cpu bug. 16%cpu usage at I 13, on a 6core 3.8ghz cpu, with the affinity set to two cores
|
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
|
August 24, 2012, 02:02:05 AM |
|
I of 7 and 9 gave me similar results, but 13 gave me +10MH/s.
Seems to have worked... Sortof... It's really bouncy.. dropping 5 below and going 10 above.. Shame how i have to be clocked at 1080 to get the meager 511mhash/s Why the hell is nitrox hitting 54x+ with a 1080 core clock... Im trying to use all the same settings that he's using.. Check your CPU usage. Anything 10 or higher, and I get 100% cpu bug. 16%cpu usage at I 13, on a 6core 3.8ghz cpu, with the affinity set to two cores Yep that's 100% on one core. Mine was 33% on a tri-core AMD, so that'd be 100% on one core.
|
|
|
|
Fiyasko (OP)
Legendary
Offline
Activity: 1428
Merit: 1001
Okey Dokey Lokey
|
|
August 24, 2012, 03:37:53 PM Last edit: September 09, 2012, 02:47:41 PM by JackRabiit |
|
I of 7 and 9 gave me similar results, but 13 gave me +10MH/s.
Seems to have worked... Sortof... It's really bouncy.. dropping 5 below and going 10 above.. Shame how i have to be clocked at 1080 to get the meager 511mhash/s Why the hell is nitrox hitting 54x+ with a 1080 core clock... Im trying to use all the same settings that he's using.. Check your CPU usage. Anything 10 or higher, and I get 100% cpu bug. 16%cpu usage at I 13, on a 6core 3.8ghz cpu, with the affinity set to two cores Yep that's 100% on one core. Mine was 33% on a tri-core AMD, so that'd be 100% on one core. So whats with nitrox getting 54xmh/s.... I can mine at 1080 stabily, but i only get 515mh/s
|
|
|
|
Badonkadonk
|
|
September 10, 2012, 09:13:31 PM Last edit: September 11, 2012, 08:14:08 AM by Badonkadonk |
|
try using diablo miner, im currently running 2 rigs with "DiabloMiner-Windows -o yourpoolhere -u username -p password -r 8337 -v 1 -w 256"
at 1100/675 and 1050/675 im getting 1150mh on each rig (2 cards in each)... could clock higher but using closed cases so temps get a bit high...
|
|
|
|
meebs
|
|
September 28, 2012, 09:29:08 PM |
|
I'm running 2x 7950s
BFGminer... the only parameter I feed it other than pool info is -i 9,9
with core of 1075, voltage of 1135 and memory at 625 I'm getting 560 mhash each.
This is on a 2700k on a Z77x-ud5h motherboard while mining litecoin on the cpu.
|
|
|
|
freeAgent
|
|
September 29, 2012, 01:07:50 PM |
|
I'm running 2x 7950s
BFGminer... the only parameter I feed it other than pool info is -i 9,9
with core of 1075, voltage of 1135 and memory at 625 I'm getting 560 mhash each.
This is on a 2700k on a Z77x-ud5h motherboard while mining litecoin on the cpu.
That sounds about right.
|
|
|
|
|