[TNG] TURING [FRESH Algo] [ANON CHAT] [STEALTH] [NETWORK TRAFFIC] [CCEX]

[johncassa]

Someone has received the first coins from Pos?
Why the wallet "Network Stake Weight" is always fixed at 101132 ?
There are problems with the POS?

It's not that as usual we have the wallet with POS that does not work while the POS of Dev works perfectly?... It would not be the first time
I hope to be wrong.

.....I would also like to know why when you do these questions the Dev goes offline

[johncassa]

Dev you should respond quickly otherwise your business ends here

[SockPuppetAccount]

Someone has received the first coins from Pos?
Why the wallet "Network Stake Weight" is always fixed at 101132 ?
There are problems with the POS?

It's not that as usual we have the wallet with POS that does not work while the POS of Dev works perfectly?... It would not be the first time
I hope to be wrong.

.....I would also like to know why when you do these questions the Dev goes offline

No one has staked yet.

"moneysupply" : 4060800.00000640

Not sure where the .00000640 comes from but its been like that since launch.  Disregarding that, the round number of the moneysupply tells me no one has staked.

The difficulty for POS was set at

"proof-of-stake" : 0.00095209

and yes, the network stake weight has been fixed at 101132 since launch.

I believe what you are seeing is that the dev purposely set the initial difficulty high and set a reasonable size default network stake weight as to make it fair for POW miners.  Those that are holding ICO coins don't get to have their coins mature and insta-mine loads of blocks taking them away from the POW miners.  POS blocks will kick in soon enough, and the difficulty and network stake weight will adjust.

[NoobKidOnTheBlock]

Dev you should respond quickly otherwise your business ends here

I would say that my business ends here as well but unfortunately I rented rigs for this coin and am in it for at least another 8 hours lmao but ya I would like to know if the staking is working properly or not?  Also why do exchanges keep adding coins right when POW starts? I don't like that much I would like to see a coin that at least goes 3/4 of the way through POW before it gets added to an exchange so it just doesn't get dumped to nothing right off the hop!

[johncassa]

Someone has received the first coins from Pos?
Why the wallet "Network Stake Weight" is always fixed at 101132 ?
There are problems with the POS?

It's not that as usual we have the wallet with POS that does not work while the POS of Dev works perfectly?... It would not be the first time
I hope to be wrong.

.....I would also like to know why when you do these questions the Dev goes offline

No one has staked yet.

"moneysupply" : 4060800.00000640

Not sure where the .00000640 comes from but its been like that since launch.  Disregarding that, the round number of the moneysupply tells me no one has staked.

The difficulty for POS was set at

"proof-of-stake" : 0.00095209

and yes, the network stake weight has been fixed at 101132 since launch.

I believe what you are seeing is that the dev purposely set the initial difficulty high and set a reasonable size default network stake weight as to make it fair for POW miners.  Those that are holding ICO coins don't get to have their coins mature and insta-mine loads of blocks taking them away from the POW miners.  POS blocks will kick in soon enough, and the difficulty and network stake weight will adjust.

But it is normal that the network stake weight is fixed at 101132?
How does one know what is its weight in the network?

[johncassa]

Dev you should respond quickly otherwise your business ends here

I would say that my business ends here as well but unfortunately I rented rigs for this coin and am in it for at least another 8 hours lmao but ya I would like to know if the staking is working properly or not?  Also why do exchanges keep adding coins right when POW starts? I don't like that much I would like to see a coin that at least goes 3/4 of the way through POW before it gets added to an exchange so it just doesn't get dumped to nothing right off the hop!

No no, for the moment we are only discussing the Pos. We have to wait to hear the response of the Dev if everything is OK.

[johncassa]

Dev you should respond quickly otherwise your business ends here

I would say that my business ends here as well but unfortunately I rented rigs for this coin and am in it for at least another 8 hours lmao but ya I would like to know if the staking is working properly or not?  Also why do exchanges keep adding coins right when POW starts? I don't like that much I would like to see a coin that at least goes 3/4 of the way through POW before it gets added to an exchange so it just doesn't get dumped to nothing right off the hop!

This is my situation for the Pos and for the moment I have not received any coins

[NoobKidOnTheBlock]

Dev you should respond quickly otherwise your business ends here

I would say that my business ends here as well but unfortunately I rented rigs for this coin and am in it for at least another 8 hours lmao but ya I would like to know if the staking is working properly or not?  Also why do exchanges keep adding coins right when POW starts? I don't like that much I would like to see a coin that at least goes 3/4 of the way through POW before it gets added to an exchange so it just doesn't get dumped to nothing right off the hop!

This is my situation for the Pos and for the moment I have not received any coins

Well how many coins do you have staking? Because your stake weight is way higher than the net stake weight I see?

[SockPuppetAccount]

But it is normal that the network stake weight is fixed at 101132?
How does one know what is its weight in the network?

Well, it is normally fixed at 0 before someone stakes right?  Thats why I am assuming he set the default value higher to prevent insta-mining POS blocks.  Give it a few more hours before you panic.  I'm pretty sure this is all on purpose and POS will kick in before you know it.

[johncassa]

Dev you should respond quickly otherwise your business ends here

I would say that my business ends here as well but unfortunately I rented rigs for this coin and am in it for at least another 8 hours lmao but ya I would like to know if the staking is working properly or not?  Also why do exchanges keep adding coins right when POW starts? I don't like that much I would like to see a coin that at least goes 3/4 of the way through POW before it gets added to an exchange so it just doesn't get dumped to nothing right off the hop!

This is my situation for the Pos and for the moment I have not received any coins

Well how many coins do you have staking? Because your stake weight is way higher than the net stake weight I see?

I sent you a PM

[johncassa]

But it is normal that the network stake weight is fixed at 101132?
How does one know what is its weight in the network?

Well, it is normally fixed at 0 before someone stakes right?  Thats why I am assuming he set the default value higher to prevent insta-mining POS blocks.  Give it a few more hours before you panic.  I'm pretty sure this is all on purpose and POS will kick in before you know it.

Ok, hopefully for good.

[NoobKidOnTheBlock]

Ya I don't know but I would assume that some people staking should've received a reward by now from what I'm seeing.  Is there anyone that can look over the code and see if the POS is coded wrong or not?

[johncassa]

This is a good news .... hopefully the Dev fix the POS quickly

[atavacron]

I had some trouble compiling the Linux QT version.

I was getting odd errors in the file "statisticspage.cpp".  But after some research, I believe that I solved the problem.

Just change line 95 in statisticspage.cpp:

from this

Code:

    QString qVolume = QLocale(QLocale::English).toString(volume);

to this

Code:

    QString qVolume = QLocale(QLocale::English).toString(int(volume));

and compile with QT5.

[johncassa]

Now my network stake weight is fixed at 680 - always without any POS

[hot king]

how much is the actual tng

[SockPuppetAccount]

Now my network stake weight is fixed at 680 - always without any POS

It switched to 680 because I just staked.  Proof incoming........



0.00020002 seems low considering it was my chunk of ICO coins that staked.  May not be a bad idea for someone more knowledgeable than me to double check that the stake rewards are coded properly.   We are staking though.  Also POS difficulty dropped rather dramatically after I staked so everyone else's stakes should start kicking in now.

I just thought of something though.  I wonder if while distributing the ICO coins, alexrossi had a large chunk of coins that ended up staking before he could finish the distribution.  Makes sense why the POS difficulty and network weight was so high if he had say......a million or so coins stake.  I explains the odd fraction of a coin that was shown in the money supply as well.

In any event, it's a minor thing I am sure and I am assuming it will be smooth sailing from here.

[@boutiuqe]

How many coin this guy gonna to make and escrow yourself ? fake buy?

[NoobKidOnTheBlock]

So has anyone received a good stake reward yet from this? I'm like 3 mins apparently away from my first reward but haven't received it yet lol

[thew3apon]

what rate did the ico close at?