[RAFFLE WINNERS ANNOUNCED] Satoshi Style 3D Printed Coffee Mugs

[S@toshiStyle]

V2 of the Satoshi Style Mugs
Now customize every order with free branding of your choice. Conditions Apply

Launching new version  of the Satoshi Style Mugs

http://satoshistyle.com/wp-content/uploads/2012/09/New-V2.jpg

Please note that the image above is a render.

These are 3D printed products, custom designed by Satoshi Style. The products are 3D printed and shipped using http://www.shapeways.com/. These are not available via Shapeways directly and you can only source them through Satoshi Style.

PLEASE NOTE : As soon as you order, your product is put into the 3D Printing queue at Shapeways. The orders are ready for shipment only 14 days after the order has been placed and completion of payment. When you place order and complete payment, the date for your product shipping shall be conveyed. The above is the standard timeline at Shapeways.

Related Information.
Type of Material : Ceramic
More information related to used material.
http://www.shapeways.com/materials/ceramics

New designs and New Prices.

Size One - 250 ml
Cup Diameter - 64mm
Cup Height - 80mm
Price : 8 BTC

Size Two - 150ml
Cup Diameter - 52mm
Cup Height - 70mm
Price : 6 BTC

Size Three (Espresso) - 80ml
Cup Diameter - 45mm
Cup Height - 50mm
Price : 3 BTC

Custom Design is free now.
Adding value to the product by giving free customization for the product. Each person who orders, shall be entitled to basic level of customization for the cup. This could include the a small logo, or your name, two words of your choice etc...

Shipping Details
All shipping is done via UPS. For base shipping prices refer below.

USA = 1 BTC
Europe = 1.5 BTC
Asia = 2 BTC
-----------------------------------------------------------
HOW TO ORDER
Send me a PM with your shipping address and I shall provide you with a BTC Payment Address. Once your payment is sent and confirmed, your order shall be placed and details of product, including completion date and shipping date shall be sent to you. Once it is shipped, you shall be provided shipping and tracking information.
------------------------------------------------------------
To calculate cost.

If you are in the US, it would cost you 9 BTC to order a large mug.
-----------------------------------------------------------
Please note that prices mentioned in OP are subject to change based the BTC/USD change value.
-----------------------------------------------------------
PM me if you would like to get more information related to the mugs.
-----------------------------------------------------------
Hope you like them.
-----------------------------------------------------------

Visit the Satoshi Style thread :

https://bitcointalk.org/index.php?topic=105724.0

-----------------------------------------------------------

[1714050000]

1714050000

[1714050000]

1714050000

[S@toshiStyle]

reserved

[S@toshiStyle]

PROMO TIME FOLKS.......

As an extension to the unsuccessful attempt at getting an advertising slot in the forums, I felt it might be a good idea to give out stuff free to gather interest. Come and get your free coffee mugs.

RAFFLE REQUIREMENTS

Send me a PM, with the message " Satoshi, send me one of those. "
Maximum 50 entries shall be accepted.
Raffle Closing Date : 17th September 2012.

PRIZES ON OFFER.

One Satoshi Style 1 Espresso Cup

One Satoshi Style 2 Espresso Cup

How it shall pan out.

2 people shall be chosen at random from the list of 50 or how many ever send in requests by the end date.

After the winners are announced, I shall request the winners to provide their shipping address and I shall ship it to them.

Good luck folks.

EDIT : UPDATE, as Coinabul suggested...lets go the full way. I shall be offering a simple logo, your name etc on the 3d Print. rock on folks. Shall discuss that individually once chosen.

[S@toshiStyle]

Satoshi is gonna send two lucky guys from the list below, espresso cups.....cheers

1.  Maidak
2.  StrictlyBusiness
3.  Coinabul
4.  honest bob
5.  SaltySpitoon
6.  kibblesnbits
7.  dburdett84
8.  inbox
9.  abracadabra
10. Soutenniza
11. Littleshop
12. keverw
13. Zillions
14. SgtSpike
15. MasonIII
16. scribe
17. Bjork
18. jasinlee
19. katie.mckinley
20. ChrisKoss
21. AndrewBUD
22. deathsythe
23. cyberlync
24. Mattster28
25. the_thing
26. Mr. Coinman

[keverw]

Expensive but cool. I kinda wish I could get one. Can you drink out them like a cheap coffee mug I can buy at local store? 3D printing is really interesting.

[S@toshiStyle]

yes you can, if you check out the link given in the OP regarding the material, it would explain itself. I know it is expensive, unless I gt myself one of those printers it would be difficult to get the prices down.

I will trying to introduce cheaper products soon. Studying feedback now.

[S@toshiStyle]

Free Mugs, up on offer.....go ahead and enter the free raffle for this product..............

send me a PM with the message " satoshi, send me one of those "

[SaltySpitoon]

Did I win yet?

[S@toshiStyle]

Did I win yet?

Raffle closes on the 17th of September 2012. I shall be announcing the winner on the 18th, and all details regarding how thw winner gets his cup shall be released.

thanks

[S@toshiStyle]

Hello folks,

Just wanted to update, I have been getting good feedback for the mugs, unto the point where I should be happy. The major concern point has been the cost of the Mugs. I am doing some work in trying to reduce the cost, since this is a 3D Print model, I have been optimizing the 3D model was able to reduce the cost a bit (not official yet).

Now I am trying further, to find the right optimized amount of material to be used. expect new updates to the post in a few hours time.

(New announcement to be added for next update to the OP) In trying to add more value to the product. I shall be providing customization free of charge so that people can add their logo's, names or other exciting stuff. (Subject to certain conditions)

thanks

[greyhawk]

Have you done a test run of those? Looking at the shapeways site it seems like the handles (especially for style 1) would be a bit of a problem.

[S@toshiStyle]

Have you done a test run of those? Looking at the shapeways site it seems like the handles (especially for style 1) would be a bit of a problem.

hey greyhawk,

Very sensible question. I have ordered my first cup. The shapeways team analyses our models and helps us optimize it. This was the part I was most concerned with initially. Everything is fine.

The handle has 2mm thickness over which 2-3mm would be added by this particular ceramic glazing. This would make it strong. A regular industrially manufactured cup would be having a handle thickness close to around 3.5mm. We are way above standard strength.

cheers

[greyhawk]

Sounds good. 

[SaltySpitoon]

Did I win yet?

Raffle closes on the 17th of September 2012. I shall be announcing the winner on the 18th, and all details regarding how thw winner gets his cup shall be released.

thanks

How about now?

[abracadabra]

Did I win yet?

Raffle closes on the 17th of September 2012. I shall be announcing the winner on the 18th, and all details regarding how thw winner gets his cup shall be released.

thanks

How about now?

* abracadabra votes that SaltySpitoon be removed from the list for asking "are we there yet" one too many times. 

[grue]

the handles don't look too ergonomic/comfortable

[keverw]

the handles don't look too ergonomic/comfortable

Yeah, I kinda thought that also. But they do look cool.

[S@toshiStyle]

the handles don't look too ergonomic/comfortable

You are correct to an extent. I was trying not spoiling the actual proportions of the representation of Bitcoin on them. Just trying to keep it as close to the original logo representation.

On the really promising side though. I have worked out some modifications in an effort to reduce cost and to standardize the cups into 3 types rather than two types, a 250ml, a 150ml and an 80ml one....I need to make the renders of the new designs and update the OP regarding that.

The present sizes are 330ml and 165ml. Material use is very high and costly. I have streamlined material use to cut cost while not losing the quality and feel of the product.

thanks

[S@toshiStyle]

Did I win yet?

Raffle closes on the 17th of September 2012. I shall be announcing the winner on the 18th, and all details regarding how thw winner gets his cup shall be released.

thanks

How about now?

* abracadabra votes that SaltySpitoon be removed from the list for asking "are we there yet" one too many times. 

 

[S@toshiStyle]

Please read OP regarding new design.