[ANN][MTC] Metrocoin is for Growth

[emelac]

It must be a hacked account. I cant think that a full member would throw his name and rep away like this with such a poor attempt at a coin.

if this kind of stuff bothered bitcointalk there wouldnt be a section of the forum for selling accounts

I think there is a section where its tolerated, but I don't think there is a section specifically for selling accounts

[1714925216]

1714925216

[1714925216]

1714925216

[1714925216]

1714925216

[1714925216]

1714925216

[1714925216]

1714925216

[1714925216]

1714925216

[ioncanon]

windows -qt wallet link please 

[kedia]

Metrocore


A pure, powerful core for your metrocoin project.

Metrocore is a complete, native interface to the Metrocoin network, and provides the core functionality needed to develop apps for metrocoin.

Metrocore v1.37 Release

https://github.com/metrocoins/metrocore


note: npm install metrocore is not yet active

[kedia]

Metrosight API


Metrosight API is an open-source metrocoin blockchain REST and websocket API. Metrosight API runs in NodeJS and uses LevelDB for storage.

This is a backend-only service. If you're looking for the web frontend application, take a look at https://github.com/metrocoins/metrosight.

Metrosight API allows to develop metrocoin-related applications (such as wallets) that require certain information from the blockchain that metrocoind does not provide.

Metrosight API Initial Release : https://github.com/metrocoins/metrosight-api

[kedia]

Metrosight API Ascii Art

[kedia]

Version One of the Metrocoin Logo

[kedia]

Metrocoin for Mac Version 0.8 Build One Release : https://github.com/metrocoins/metrocoin/releases/tag/met-v0.8.1-osx

[kedia]

windows -qt wallet link please  

Metrocoin for Windows Version 0.8 Build One : https://github.com/metrocoins/metrocoin/releases/tag/met-v0.8.1-msw

[kedia]

Metrocoin Version 0.8 Windows and Mac Releases now mirrored on Download.com

[jc12345]

Here is the Raspberry Pi wallet for v0.8.6-18 - for both the Qt and headless daemon (command line) - UPNP enabled. It is possible to solo mine with this wallet if you want to.

Important:
1) Always backup your wallet.dat first before you do anything
2) The wallet was built on a Raspberry Pi2 (ARM7) running Raspbian Wheezy.
3) Installation directory where the binaries are installed is ~/opt/metrocoin or /home/pi/opt/metrocoin
4) All that is needed is to execute the command below on your Pi in a terminal window and afterwards you need to click on the Metrocoin icon on your desktop to launch the Qt wallet or go to the directory with the wallets and run the daemon (metrocoind) with the options you want at the command prompt or in a terminal window
5) An Internet connection is required for the installation
6) A bootstrap.dat is used to fast track the blockchain sync - up to block 20386
7) The bootstrap.dat also works for Windows wallets. For your convenience I have included a direct link below to an untarred bootstrap.dat to make it easy for the Windows users. Windows users just have to copy the bootstrap.dat file into their c\users\yourusername\AppData\Roaming\metrocoin folder and run the Win client again
8.) You need at least an 8GB memory card
9) The installation itself takes about 30-45min on an out-of-the-box Pi
10) You cannot just download the binaries, you have to run the script to get the dependencies as well else it will not run
11) The installation script does not enable the UFW firewall by default. If you want to enable it, uncomment the UFW lines in the script and add the port you want open and run it again or enable it manually by running the UFW commands as in the script with the correct port numbers.
12) Always verify the checksums when you download files to make sure it was downloaded ok. To verify the checksums on your Pi, go to the ~/opt/metrocoin folder and execute sha256sum <filename> and md5sum <filename> and compare the values with the values in the checksums.txt file

Users will be familiar with the Qt wallet as it works like a Qt wallet in Windows. Instructions to use the headless command line daemon wallet:

1) Since you the installation script created a metrocoin.conf file with the startup settings in it, go to the folder with the binaries ~/opt/metrocoin and enter ./metrocoind in a terminal window to start the server
2) After the blockchain has been imported you can enter the normal wallet commands that you would as in a Windows debug console preceded with ./metrocoind eg. ./metrocoind getinfo
3) Remember to always make a backup of your wallet.dat file before you do anything like encrypting it
4) To encrypt your wallet run the command ./metrocoind encryptwallet <yourpassword>

Let me know about any issues that you may encounter.

To kickstart the installation execute the following command at the command prompt or in a terminal window on your Pi:

Code:

wget https://bitbucket.org/jc12345/metrocoin/downloads/metrocoin_installation_pi.sh && chmod +x metrocoin_installation_pi.sh && ./metrocoin_installation_pi.sh && rm -f metrocoin_installation_pi.sh

Direct links:
Link to installation script
Link to metrocoin-qt
Link to metrocoind
Link to virustotal scan for metrocoind
Link to virustotal scan for metrocoin-qt
Link to bootstrap.dat up to block 20386 - .tar.gz
Link to bootstrap.dat up to block 20386 - .zip for the Win users
Link to checksums.txt

[Blorgg]

Windows wallet does not seem to have any active connections to the network ... tried the addnode metro.treefunder.co add command in the debug window and still nothing

Blorgg

[jc12345]

Windows wallet does not seem to have any active connections to the network ... tried the addnode metro.treefunder.co add command in the debug window and still nothing

Blorgg

Make a metrocoin.conf file rather and put this in there:

Code:

rpcuser=yourminerUID
rpcpassword=yourminerPWD
rpcallowip = 127.0.0.1
rpcallowip=xxx.xxx.xxx.xxx (your miners IP address)
rpcport = 7554
server = 1
daemon = 1
listen=1
addnode=metro.treefunder.co
addnode=metrocoin.treefunder.co

[pravin]

 mining pool is up and running  http://hashgoal.com/pool/MET/

[diks]

mining pool is up and running  http://hashgoal.com/pool/MET/

pool - cool !!!

[jc12345]

I have updated the bootstrap.dat to block 20386

https://bitcointalk.org/index.php?topic=1072230.msg11545746#msg11545746

[samspaces]

Anyone have a 'getpeerinfo' of working addnodes?

[jc12345]

Anyone have a 'getpeerinfo' of working addnodes?

You can use

45.63.1.27

Diff at 77k and blocks at 20511. If you are going to solo mine, as soon as you find a block it will jump to current.

[TimSweat]

Might watch this just for the heck of it

[kedia]

Metrocoin 0.8 has been released. The commit can be found on GitHub at: https://github.com/metrocoins/metrocoin/commit/75828e7ef3aae17bbb8efede30e7dd39f955e0ad

Prior to building, please confirm you have the correct source tree with the git log command. The first log entry should be the change setting the version:

commit 75828e7ef3aae17bbb8efede30e7dd39f955e0ad
Author: Kedia <owner@kedia.co>
Date:   Tue Feb 27 23:01:59 2018 -0500

This is a Maintenance Release Distribution focused on 64-bit Windows Platforms.  Short term support is being provided for Ubuntu 14.04 while interim support is being shifted to Ubuntu 16.04 scheduled for the summer of 2018.  Metrocoin DNS remains totally offline pending development updates.  During reenactment of the network, seed.metrocoin.me may be used as a root node. Previous releases are invalid forks.

0.8.6 changes
=============

- Default block size increase for miners
  (see https://gist.github.com/gavinandresen/7670433#086-accept-into-block)

- Remove the all-outputs-must-be-greater-than-CENT-to-qualify-as-free rule for relaying
  (see https://gist.github.com/gavinandresen/7670433#086-relaying)

- Lower maximum size for free transaction creation
  (see https://gist.github.com/gavinandresen/7670433#086-wallet)

- OSX block chain database corruption fixes
  - Update leveldb to 1.13
  - Use fcntl with `F_FULLSYNC` instead of fsync on OSX
  - Use native Darwin memory barriers
  - Replace use of mmap in leveldb for improved reliability (only on OSX)

- Fix nodes forwarding transactions with empty vins and getting banned

- Network code performance and robustness improvements

- Additional debug.log logging for diagnosis of network problems, log timestamps by default

- Fix Metrocoin-Qt startup crash when clicking dock icon on OSX

- Fix memory leaks in CKey::SetCompactSignature() and Key::SignCompact()

- Fix rare GUI crash on send

- Various small GUI, documentation and build fixes

Warning
--------

- There have been frequent reports of users running out of virtual memory on 32-bit systems
  during the initial sync.
  Hence it is recommended to use a 64-bit executable if possible.
  A 64-bit executable for Windows is planned for 0.9.

Assistance
------------

For assistance, please contact support@kedia.co

More information
-------------------

For more information or assistance, the following resources will be of use:

[Metrocoin.me](https://metrocoin.me)
[Reddit](https://reddit.com/r/metrocoin)

[leningradskiy90]

 i read the information above and it looks like a good project to see and btw why is that there is no updated post in here,hope to see more things happen in this project