tbonetony (OP)
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 441
Merit: 250
No zuo no die why you try, u zuo u die dont be shy
|
![](https://bitcointalk.org/Themes/custom1/images/post/question.gif) |
June 13, 2015, 04:35:22 AM |
|
Hi folks,
I am about to start building a gpu miner myself. Before I place orders, I have some questions on the raiser cables. Nowadays they all seem to come with either SATA or Molex power ports. But what exactly needs such power? Does this mean that once my GPU is connected with the raiser cable (on the x16 terminal), it would no longer require PCI-E 6/8 pins to power up?
I could not find relevant answers maybe this question is just too naive.
Thanks for your help.
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2015, 05:11:38 AM |
|
The x16 PCI-E port can supply 75 watts, the 6-pin cable can supply an additional 75W and a 8-pin can 150W. But the x1 PCI-E slots can only supply 10W so you have to feed the riser with 75W via molex or SATA instead (Assuming you use PCI-E x1 powered USB risers like these: http://cryptomining-blog.com/wp-content/uploads/2014/03/pci-express-x1-x16-usb-30-extender.jpg) so that only covers the 75W and you still need to use 6/8-pin connectors.
|
Not your keys, not your coins!
|
|
|
kotarius
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2015, 09:01:03 AM |
|
Hi folks,
I am about to start building a gpu miner myself. Before I place orders, I have some questions on the raiser cables. Nowadays they all seem to come with either SATA or Molex power ports. But what exactly needs such power? Does this mean that once my GPU is connected with the raiser cable (on the x16 terminal), it would no longer require PCI-E 6/8 pins to power up?
I could not find relevant answers maybe this question is just too naive.
Thanks for your help.
You must always connect 6-pin and 8-pin PCI-E power to GPU. There are never any exceptions to this.
|
|
|
|
Grout
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2015, 10:44:38 AM |
|
Hi folks,
I am about to start building a gpu miner myself. Before I place orders, I have some questions on the raiser cables. Nowadays they all seem to come with either SATA or Molex power ports. But what exactly needs such power? Does this mean that once my GPU is connected with the raiser cable (on the x16 terminal), it would no longer require PCI-E 6/8 pins to power up?
I could not find relevant answers maybe this question is just too naive.
Thanks for your help.
Yes, you need to connect the 6/8 pins. Powered risers are there to protect the motherboard when you have several GPUs in you system. Each card can pull up to 75W from the PCIe port. That's OK for 2-3 cards. But if you have 6, that's 450W total and I wouldn't risk pulling that much from the motherboard.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2015, 01:12:22 PM |
|
also avoid using the sata-molex cable as it can burn... don't put more than one card per cable (or molex grape whatever it is called) or it can burn don't use a cheap psu, or it can burn. probably better actually to buy several small good psu than a big one or it will burn... in summary: there are non negligible chances it will burn ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Grout
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2015, 02:56:30 PM |
|
also avoid using the sata-molex cable as it can burn... don't put more than one card per cable (or molex grape whatever it is called) or it can burn don't use a cheap psu, or it can burn. probably better actually to buy several small good psu than a big one or it will burn... in summary: there are non negligible chances it will burn ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Whatever hardware you choose to use in your rig, its hostname should be firehazard.yourdomain.com ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2015, 04:22:17 PM |
|
also avoid using the sata-molex cable as it can burn... don't put more than one card per cable (or molex grape whatever it is called) or it can burn don't use a cheap psu, or it can burn. probably better actually to buy several small good psu than a big one or it will burn... in summary: there are non negligible chances it will burn ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Whatever hardware you choose to use in your rig, its hostname should be firehazard.yourdomain.com ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Yep! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FxzTr75h.jpg&t=665&c=ZHBAWa4t4X7d3w) To be fair a 750 Ti which doesn't have any 6/8-pin burned this, cards which can pull additional electricity from 6/8-pins are not as likely to burn it if you only put 1 card per cable as said above.
|
Not your keys, not your coins!
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2015, 04:44:00 PM |
|
also avoid using the sata-molex cable as it can burn... don't put more than one card per cable (or molex grape whatever it is called) or it can burn don't use a cheap psu, or it can burn. probably better actually to buy several small good psu than a big one or it will burn... in summary: there are non negligible chances it will burn ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Whatever hardware you choose to use in your rig, its hostname should be firehazard.yourdomain.com ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Yep! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FxzTr75h.jpg&t=665&c=ZHBAWa4t4X7d3w) To be fair a 750 Ti which doesn't have any 6/8-pin burned this, cards which can pull additional electricity from 6/8-pins are not as likely to burn it if you only put 1 card per cable as said above. well... I had the problem on my secondary psu which powers my 780ti (actually it burnt at the other side + on the psu cable it was a cheap one). forgot to mention: monorail psu or it will burn ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) but lets face it all these problems are probably more related to the cable than anything else
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2015, 05:21:53 PM |
|
well... I had the problem on my secondary psu which powers my 780ti (actually it burnt at the other side + on the psu cable it was a cheap one). forgot to mention: monorail psu or it will burn ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) but lets face it all these problems are probably more related to the cable than anything else Yes, I bulk-bought a few dozen risers with cables and tested quite a few of them and some cables don't contact with the riser as well as others so some cables get warm, others get hot while most remain cold. I can't see anything that would imply poor contact but it's always the white plastic part that gets warm. However, I always only had warm cables with non 6/8 pin powered cards mining something power hungry like scrypt (oh cointellect). Oh yeah power supplies... when I started of course I ordered multi rail PSUs (EVGA SuperNOVA NEX650G) and they turned the hell off as soon as I started mining with 4 cards or more. Then I sent them back and got two single rail PSUs (XFX PRO 650W) which are louder than all my cards combined so I decided not to go lower both in size and quality than EVGA SuprNOVA G2 850W and 1300W PSUs which are amazing and have 10 year warranty on them iirc.
|
Not your keys, not your coins!
|
|
|
tbonetony (OP)
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 441
Merit: 250
No zuo no die why you try, u zuo u die dont be shy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2015, 05:26:35 PM |
|
Thank you all for your advices. Really helped!
|
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 14, 2015, 10:59:40 AM |
|
... and use only one gpu, yep you don't need a riser... otherwise I want to know how you fit the gpu into the small pcie... ... and plugging the molex into mobo increase the chance that the mobo will burn as well
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
BitmoreCoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 16, 2015, 06:52:58 PM |
|
... and use only one gpu, yep you don't need a riser... otherwise I want to know how you fit the gpu into the small pcie... ... and plugging the molex into mobo increase the chance that the mobo will burn as well Sorry, I mean you do not need powered risers. I have 8 GPUs on the 6 slots, working fine.
|
|
|
|
Corsa1r
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 89
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 17, 2015, 10:28:37 AM |
|
... and use only one gpu, yep you don't need a riser... otherwise I want to know how you fit the gpu into the small pcie... ... and plugging the molex into mobo increase the chance that the mobo will burn as well Sorry, I mean you do not need powered risers. I have 8 GPUs on the 6 slots, working fine. 8 gpus? How do you achieve this with only 6 slots?
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 17, 2015, 10:55:57 AM |
|
... and use only one gpu, yep you don't need a riser... otherwise I want to know how you fit the gpu into the small pcie... ... and plugging the molex into mobo increase the chance that the mobo will burn as well Sorry, I mean you do not need powered risers. I have 8 GPUs on the 6 slots, working fine. 8 gpus? How do you achieve this with only 6 slots? ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) what I meant is that you require the mobo to draw 75W per card so 6 or 8 gpu with one additional molex plugged into the mobo is still somewhat risky your system is drawing 450W through the mobo (not taking into account cpu, memory etc...) so yes it might burn... (at that level powered riser are, in my opinion, a better solution)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
BitmoreCoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 18, 2015, 09:40:20 AM |
|
... and use only one gpu, yep you don't need a riser... otherwise I want to know how you fit the gpu into the small pcie... ... and plugging the molex into mobo increase the chance that the mobo will burn as well Sorry, I mean you do not need powered risers. I have 8 GPUs on the 6 slots, working fine. 8 gpus? How do you achieve this with only 6 slots? I use dual gpu cards such as 7990. 4X7990 = 8 GPU. 3X7990+2X7970 = 8 GPU. I use as many gpu as possible to reduce the overhead cost of system. So the total cost (electricity) per card is lower. If you undervolt and underclock, you will not use the full 75W PCIE power/current. H61/81 is good as they have two on board molex socket. These cards are built for mining, so they are robust.
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 18, 2015, 09:48:04 AM |
|
H61/81 is good as they have two on board molex socket. These cards are built for mining, so they are robust.
With powered USB risers I don't use the molex sockets on the motherboard. While PCI-E 1x sockets can only output 10W, not even that is being pulled from there. The cards pull everything from the riser, therefore the PSU itself so I think it's pointless to use those sockets and those sockets are only there for the early unpowered risers but nobody uses them anymore.
|
Not your keys, not your coins!
|
|
|
|