[ANN][TX]TRANSFER - BITTREX - MULTIPOOL - ANDROID - POW/POS,TOR, MN, Stealth

[ankylotic]

I would like to cordially invite Transfer Coin on SuperNET Radio. The whole point of the show is to educate, so what is the coin about ? Future plans, goals, theories, etc. We do not promote and negatory remarks or questions, you will not be interrogated. You can review our past shows and see that.   https://soundcloud.com/supernetradio



SNRN, Architect and Owner,
SuperNETRadio@gmail.com
lootzlootz (skype)
LooTz

This is a great idea

[1715035243]

1715035243

[1715035243]

1715035243

[ankylotic]

2/3 of the way there guys almost at 15k, I still need help with masternode

[proletariat]

2/3 of the way there guys almost at 15k, I still need help with masternode

Try this:

• Click on Masternodes button
• Switch to My Master Nodes Tab
• Click Create
• Alias field: yourmasternodename
• Address field: your ip:port example: 123.456.78.9:9999
• Click OK
• Select your new masternode and click "Copy Address"
• Send exactly 100,000 coins to that address
• Again select your new masternode and click "get config"
• A window pops up - copy that and paste it in notepad
• replace the fields that say "REPLACEME" with whateverrandomthingyoucomeupwith
• add a line with this: staking=0
• save as %appdata%\transfer\transfer.conf
• restart your wallet
• Click on Masternodes button
• Switch to My Master Nodes Tab
• Select your masternode and click "start"
• Congratulations, you got your self a master node  

*NOTES*
*EDIT* wallet must be fully unlocked when you click "create"
To send exactly 100k including fee it is easier to enable coin control in your wallet then select your inputs adding up to 100k plus ~1 coin then just type 100000 and your wallet will deduct the fees and will send one single and exact 100k input.

Your transaction must have at least 10 confirms in order to be used as a collateral address.
I don't think having the port open is absolutely necessary but just to be sure, open it.
Sometimes your external ip will not be detected so it doesn't hurt to add "externalip=yourexternalip" in another line in your conf file.
Make sure your conf file extension is conf and not conf.txt
I always use a fresh new wallet for the nodes so I can stake my MN payments in another wallet just for staking.

It should work - let me know if it does.......

[Bitr8er]

Is it too late to stake for 300TX blocks?

[ankylotic]

2/3 of the way there guys almost at 15k, I still need help with masternode

Try this:

• Click on Masternodes button
• Switch to My Master Nodes Tab
• Click Create
• Alias field: yourmasternodename
• Address field: your ip:port example: 123.456.78.9:9999
• Click OK
• Select your new masternode and click "Copy Address"
• Send exactly 100,000 coins to that address
• Again select your new masternode and click "get config"
• A window pops up - copy that and paste it in notepad
• replace the fields that say "REPLACEME" with whateverrandomthingyoucomeupwith
• add a line with this: staking=0
• save as %appdata%\transfer\transfer.conf
• restart your wallet
• Click on Masternodes button
• Switch to My Master Nodes Tab
• Select your masternode and click "start"
• Congratulations, you got your self a master node  

*NOTES*
*EDIT* wallet must be fully unlocked when you click "create"
To send exactly 100k including fee it is easier to enable coin control in your wallet then select your inputs adding up to 100k plus ~1 coin then just type 100000 and your wallet will deduct the fees and will send one single and exact 100k input.

Your transaction must have at least 10 confirms in order to be used as a collateral address.
I don't think having the port open is absolutely necessary but just to be sure, open it.
Sometimes your external ip will not be detected so it doesn't hurt to add "externalip=yourexternalip" in another line in your conf file.
Make sure your conf file extension is conf and not conf.txt
I always use a fresh new wallet for the nodes so I can stake my MN payments in another wallet just for staking.

It should work - let me know if it does.......

That worked great Thank You !!!

[proletariat]

Is it too late to stake for 300TX blocks?

no, there's still around 5k 300tx blocks but you will only get paid 150tx when you stake one, the other half goes to the master nodes.

2/3 of the way there guys almost at 15k, I still need help with masternode

Try this:

• Click on Masternodes button
• Switch to My Master Nodes Tab
• Click Create
• Alias field: yourmasternodename
• Address field: your ip:port example: 123.456.78.9:9999
• Click OK
• Select your new masternode and click "Copy Address"
• Send exactly 100,000 coins to that address
• Again select your new masternode and click "get config"
• A window pops up - copy that and paste it in notepad
• replace the fields that say "REPLACEME" with whateverrandomthingyoucomeupwith
• add a line with this: staking=0
• save as %appdata%\transfer\transfer.conf
• restart your wallet
• Click on Masternodes button
• Switch to My Master Nodes Tab
• Select your masternode and click "start"
• Congratulations, you got your self a master node 

*NOTES*
*EDIT* wallet must be fully unlocked when you click "create"
To send exactly 100k including fee it is easier to enable coin control in your wallet then select your inputs adding up to 100k plus ~1 coin then just type 100000 and your wallet will deduct the fees and will send one single and exact 100k input.

Your transaction must have at least 10 confirms in order to be used as a collateral address.
I don't think having the port open is absolutely necessary but just to be sure, open it.
Sometimes your external ip will not be detected so it doesn't hurt to add "externalip=yourexternalip" in another line in your conf file.
Make sure your conf file extension is conf and not conf.txt
I always use a fresh new wallet for the nodes so I can stake my MN payments in another wallet just for staking.

It should work - let me know if it does.......

That worked great Thank You !!!

Glad it did! 

[ozboy2014]

2/3 of the way there guys almost at 15k, I still need help with masternode

Try this:

• Click on Masternodes button
• Switch to My Master Nodes Tab
• Click Create
• Alias field: yourmasternodename
• Address field: your ip:port example: 123.456.78.9:9999
• Click OK
• Select your new masternode and click "Copy Address"
• Send exactly 100,000 coins to that address
• Again select your new masternode and click "get config"
• A window pops up - copy that and paste it in notepad
• replace the fields that say "REPLACEME" with whateverrandomthingyoucomeupwith
• add a line with this: staking=0
• save as %appdata%\transfer\transfer.conf
• restart your wallet
• Click on Masternodes button
• Switch to My Master Nodes Tab
• Select your masternode and click "start"
• Congratulations, you got your self a master node  

*NOTES*
*EDIT* wallet must be fully unlocked when you click "create"
To send exactly 100k including fee it is easier to enable coin control in your wallet then select your inputs adding up to 100k plus ~1 coin then just type 100000 and your wallet will deduct the fees and will send one single and exact 100k input.

Your transaction must have at least 10 confirms in order to be used as a collateral address.
I don't think having the port open is absolutely necessary but just to be sure, open it.
Sometimes your external ip will not be detected so it doesn't hurt to add "externalip=yourexternalip" in another line in your conf file.
Make sure your conf file extension is conf and not conf.txt
I always use a fresh new wallet for the nodes so I can stake my MN payments in another wallet just for staking.

It should work - let me know if it does.......

Thanks for this. My problem is that the 9999 port is block. Can I use other port

Address field: your ip:port example: 123.456.78.9:9999

[ankylotic]

I had to setup port forwarding on my router, do you guys see a node with port 777 ?

[Transfer dev]

2/3 of the way there guys almost at 15k, I still need help with masternode

Try this:

• Click on Masternodes button
• Switch to My Master Nodes Tab
• Click Create
• Alias field: yourmasternodename
• Address field: your ip:port example: 123.456.78.9:9999
• Click OK
• Select your new masternode and click "Copy Address"
• Send exactly 100,000 coins to that address
• Again select your new masternode and click "get config"
• A window pops up - copy that and paste it in notepad
• replace the fields that say "REPLACEME" with whateverrandomthingyoucomeupwith
• add a line with this: staking=0
• save as %appdata%\transfer\transfer.conf
• restart your wallet
• Click on Masternodes button
• Switch to My Master Nodes Tab
• Select your masternode and click "start"
• Congratulations, you got your self a master node  

*NOTES*
*EDIT* wallet must be fully unlocked when you click "create"
To send exactly 100k including fee it is easier to enable coin control in your wallet then select your inputs adding up to 100k plus ~1 coin then just type 100000 and your wallet will deduct the fees and will send one single and exact 100k input.

Your transaction must have at least 10 confirms in order to be used as a collateral address.
I don't think having the port open is absolutely necessary but just to be sure, open it.
Sometimes your external ip will not be detected so it doesn't hurt to add "externalip=yourexternalip" in another line in your conf file.
Make sure your conf file extension is conf and not conf.txt
I always use a fresh new wallet for the nodes so I can stake my MN payments in another wallet just for staking.

It should work - let me know if it does.......

Thanks for this Proletariat. (good guide ! )

Thanks for this. My problem is that the 9999 port is block. Can I use other port

Address field: your ip:port example: 123.456.78.9:9999

You can try another free port. I saw masternodes with 9001,9999, 17170....


But if you have blocked port 9999 .... rest of your ports can be blocked too.
Try http://www.computerhope.com/issues/ch001201.htm or http://www.howtogeek.com/66214/how-to-forward-ports-on-your-router/.

Hope it will help.

[CosaNostra]

Guys!
DO NOT DEPOSIT ANYTHING TO lumecamp.com!!!
My withdraw is "in process" for 14 hours already - support is not answering!

[ankylotic]

Guys!
DO NOT DEPOSIT ANYTHING TO lumecamp.com!!!
My withdraw is "in process" for 14 hours already - support is not answering!

Thanks for the heads up bro

[Laamadeus]

Looks like someone is trying to keep the price below 356 on Yobit.

Someone is trying to accumulate.  

Me too.  . I believe we will see sub 100 sat in the few days.

I hope that too. That price is cheap for this coin. Sorry for those 2 guys who PM'd me, I didn't even answer to you and I don't need coins anymore @ 500 sat each.

[CosaNostra]

Yeah! It's crazy - only 0.4 BTC to setup a masternode at current price! 

That price is cheap for this coin.

[Nefritox]

will bittrex add this coin ?

[ret]

will bittrex add this coin ?

and when?

[Jerry S]

got few 150 blocks, 4k more blocks to go

[rocoloko]

Actually only 3k blocks to the end of pow.

POS diff. is high as hell.

I´m sure Bittrex will add this coin.

[Joshua kingpin]

2/3 of the way there guys almost at 15k, I still need help with masternode

Try this:

• Click on Masternodes button
• Switch to My Master Nodes Tab
• Click Create
• Alias field: yourmasternodename
• Address field: your ip:port example: 123.456.78.9:9999
• Click OK
• Select your new masternode and click "Copy Address"
• Send exactly 100,000 coins to that address
• Again select your new masternode and click "get config"
• A window pops up - copy that and paste it in notepad
• replace the fields that say "REPLACEME" with whateverrandomthingyoucomeupwith
• add a line with this: staking=0
• save as %appdata%\transfer\transfer.conf
• restart your wallet
• Click on Masternodes button
• Switch to My Master Nodes Tab
• Select your masternode and click "start"
• Congratulations, you got your self a master node  

*NOTES*
*EDIT* wallet must be fully unlocked when you click "create"
To send exactly 100k including fee it is easier to enable coin control in your wallet then select your inputs adding up to 100k plus ~1 coin then just type 100000 and your wallet will deduct the fees and will send one single and exact 100k input.

Your transaction must have at least 10 confirms in order to be used as a collateral address.
I don't think having the port open is absolutely necessary but just to be sure, open it.
Sometimes your external ip will not be detected so it doesn't hurt to add "externalip=yourexternalip" in another line in your conf file.
Make sure your conf file extension is conf and not conf.txt
I always use a fresh new wallet for the nodes so I can stake my MN payments in another wallet just for staking.

It should work - let me know if it does.......

Useful Guide. Well done Proletariat.
Waiting for Bittrex + moon. 

[proletariat]

2/3 of the way there guys almost at 15k, I still need help with masternode

Try this:

• Click on Masternodes button
• Switch to My Master Nodes Tab
• Click Create
• Alias field: yourmasternodename
• Address field: your ip:port example: 123.456.78.9:9999
• Click OK
• Select your new masternode and click "Copy Address"
• Send exactly 100,000 coins to that address
• Again select your new masternode and click "get config"
• A window pops up - copy that and paste it in notepad
• replace the fields that say "REPLACEME" with whateverrandomthingyoucomeupwith
• add a line with this: staking=0
• save as %appdata%\transfer\transfer.conf
• restart your wallet
• Click on Masternodes button
• Switch to My Master Nodes Tab
• Select your masternode and click "start"
• Congratulations, you got your self a master node  

*NOTES*
*EDIT* wallet must be fully unlocked when you click "create"
To send exactly 100k including fee it is easier to enable coin control in your wallet then select your inputs adding up to 100k plus ~1 coin then just type 100000 and your wallet will deduct the fees and will send one single and exact 100k input.

Your transaction must have at least 10 confirms in order to be used as a collateral address.
I don't think having the port open is absolutely necessary but just to be sure, open it.
Sometimes your external ip will not be detected so it doesn't hurt to add "externalip=yourexternalip" in another line in your conf file.
Make sure your conf file extension is conf and not conf.txt
I always use a fresh new wallet for the nodes so I can stake my MN payments in another wallet just for staking.

It should work - let me know if it does.......

Useful Guide. Well done Proletariat.
Waiting for Bittrex + moon. 

Yeah, I can see it's been useful, I got twice the competition for MN payments now 

[ret]

Waiting for Bittrex + moon.

10k sat??? or more?