[ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! //

[fastlan]

I fancy giving ETH mining a go, for the first time.

What hash rate should I be expecting with amd r9 290 tri-x cards, on Windows?

Cheers

edit

better ask, is it profitable to mine ETH?

It depends how much you pay for power, but for me ETH is the only profitable coin right now

I make about 30 MH/s per R9280x (underclocked) - i don't have an 290x yet but you'll probably make 50-60 MH/s per card I guess

Well, I don't live in China so electricity is not free  

Out of interest, what temps does the R9280x generate? That's where the electricity money goes.

I'll try to connect to the pool later this week.


edit

around 75c?

depends on the scenario, roomtemp and case....i have a rig in my garage and the hottest is my 290 (72c) & i have a 280x in the house in a closed case (80c)

[z0n0]

I fancy giving ETH mining a go, for the first time.

What hash rate should I be expecting with amd r9 290 tri-x cards, on Windows?

Cheers

edit

better ask, is it profitable to mine ETH?

It depends how much you pay for power, but for me ETH is the only profitable coin right now

I make about 30 MH/s per R9280x (underclocked) - i don't have an 290x yet but you'll probably make 50-60 MH/s per card I guess

Can you pls share your config? I'm getting just 23MH

[snikerhd]

ocminer can you help me im using ethminer -F http://eth-mine.suprnova.cc:3000/snikerhd.sniker/50 -C
pause
and nothing appear one dashboard i dont know why can you help me https://i.imgur.com/tgWM4DG.png

[ocminer]

ocminer can you help me im using ethminer -F http://eth-mine.suprnova.cc:3000/snikerhd.sniker/50 -C
pause
and nothing appear one dashboard i dont know why can you help me

Hey mate !

Everything looks good, but CPU mining for ETH is more or less over - everyone is mining with GPU's already and CPU Hashrate is so low, you'll hardly even submit a share and get paid.

So either turn to GPU mining with -G instead of -C or mine a CPU-only coin (Argon / OPES) instead of ETH.

[snikerhd]

ocminer can you help me im using ethminer -F http://eth-mine.suprnova.cc:3000/snikerhd.sniker/50 -C
pause
and nothing appear one dashboard i dont know why can you help me https://i.imgur.com/tgWM4DG.png

Hey mate !

Everything looks good, but CPU mining for ETH is more or less over - everyone is mining with GPU's already and CPU Hashrate is so low, you'll hardly even submit a share and get paid.

So either turn to GPU mining with -G instead of -C or mine a CPU-only coin (Argon / OPES) instead of ETH.

i ty for the anwser im using gpu https://i.imgur.com/0bSiUTc.png and still nothing   nvidia 760

[z0n0]

I fancy giving ETH mining a go, for the first time.

What hash rate should I be expecting with amd r9 290 tri-x cards, on Windows?

Cheers

edit

better ask, is it profitable to mine ETH?

It depends how much you pay for power, but for me ETH is the only profitable coin right now

I make about 30 MH/s per R9280x (underclocked) - i don't have an 290x yet but you'll probably make 50-60 MH/s per card I guess

Can you pls share your config? I'm getting just 23MH

[snikerhd]

its working now more one thing how i can improve my mining what do you recomend to mine eth what machine can you help me with that plz

[ocminer]

I fancy giving ETH mining a go, for the first time.

What hash rate should I be expecting with amd r9 290 tri-x cards, on Windows?

Cheers

edit

better ask, is it profitable to mine ETH?

It depends how much you pay for power, but for me ETH is the only profitable coin right now

I make about 30 MH/s per R9280x (underclocked) - i don't have an 290x yet but you'll probably make 50-60 MH/s per card I guess

Can you pls share your config? I'm getting just 23MH

Hey z0n0, i'm using stock config/settings, but you're right, its between 25-28 MH/s for me too.

its working now more one thing how i can improve my mining what do you recomend to mine eth what machine can you help me with that plz

You should probably read this thread: https://bitcointalk.org/index.php?topic=1298549.0 , R9 Nano's are IMHO best cards and Eliovp did a great job over there testing.

[coins101]

I fancy giving ETH mining a go, for the first time.

What hash rate should I be expecting with amd r9 290 tri-x cards, on Windows?

Cheers

edit

better ask, is it profitable to mine ETH?

It depends how much you pay for power, but for me ETH is the only profitable coin right now

I make about 30 MH/s per R9280x (underclocked) - i don't have an 290x yet but you'll probably make 50-60 MH/s per card I guess

Well, I don't live in China so electricity is not free  

Out of interest, what temps does the R9280x generate? That's where the electricity money goes.

I'll try to connect to the pool later this week.


edit

around 75c?

depends on the scenario, roomtemp and case....i have a rig in my garage and the hottest is my 290 (72c) & i have a 280x in the house in a closed case (80c)

Thanks!

~70c is not bad. Better than mining LTC a few years ago, which kept cooking my miners, so I was grateful to have DRK x11 to switch to. 80c would be an upper limit for me. Not interested at that point. I think I'll set temp cutoff around 75c. Above that and I'd rather just buy ETH direct (which I have no plans on doing).

[snikerhd]

can you help me with this please xD PROXY http://prntscr.com/9m19a6 Thanks for help me out. Im mining because your sites rocks my friend

[ocminer]

can you help me with this please xD PROXY http://prntscr.com/9m19a6 Thanks for help me out. Im mining because your sites rocks my friend

Thanks for your props

Are you using Sammy's proxy? It looks like you passed the wrong IP to the proxy. It is not 127.0.0.2

[snikerhd]

yes im using Sammy's proxy

[ocminer]

OK the config has to look like this:

"upstream": [
  {
    "pool": true,
    "name": "Suprnova.cc",
    "url": "http://eth-mine.suprnova.cc:3030/snikerhd.1/50",
    "timeout": "10s"
  },


Should work then

[snikerhd]

http://prntscr.com/9m1juk rip me xD

[ocminer]

http://prntscr.com/9m1juk rip me xD

Seems you still have the wrong IP somewhere in the configuration... 127.0.0.1 is wrong, can you post your config?

[snikerhd]

{
   "threads": 2,

   "proxy": {
      "listen": "0.0.0.0:8546",
      "clientTimeout": "3m",
      "blockRefreshInterval": "100ms",
      "hashrateWindow": "15m",
      "submitHashrate": false,
      "luckWindow": "24h",
      "largeLuckWindow": "72h"
   },

   "frontend": {
      "listen": "0.0.0.0:8080",
      "login": "admin",
      "password": ""
   },

   "upstreamCheckInterval": "5s",
   "upstream": [
  {
         "pool": true,
         "name": "Suprnova.cc",
         "url": "http://eth-mine.suprnova.cc:3030/snikerhd.sniker/50",
         "timeout": "10s"
  },
      {
         "name": "main",
         "url": "http://127.0.0.1:8545",
         "timeout": "10s"
      },
      {
         "name": "backup",
         "url": "http://127.0.0.2:8545",
         "timeout": "10s"
      }
   ],

   "newrelicEnabled": false,
   "newrelicName": "MyEtherProxy",
   "newrelicKey": "SECRET_KEY",
   "newrelicVerbose": false
}


sniker is my worker XD

[ocminer]

Try:

{
   "threads": 2,

   "proxy": {
      "listen": "0.0.0.0:8545",
      "clientTimeout": "3m",
      "blockRefreshInterval": "100ms",
      "hashrateWindow": "15m",
      "submitHashrate": false,
      "luckWindow": "24h",
      "largeLuckWindow": "72h"
   },

   "frontend": {
      "listen": "0.0.0.0:8080",
      "login": "admin",
      "password": ""
   },

   "upstreamCheckInterval": "5s",
   "upstream": [
  {
         "pool": true,
         "name": "Suprnova.cc",
         "url": "http://eth-mine.suprnova.cc:3030/snikerhd.sniker/50",
         "timeout": "10s"
  }
   ],

   "newrelicEnabled": false,
   "newrelicName": "MyEtherProxy",
   "newrelicKey": "SECRET_KEY",
   "newrelicVerbose": false
}

And point your rigs to

http://IPOFYOURHOSTWITHPROXY:8545

[snikerhd]

ethminer -F http://192.168.1.197:8545 -G i try with this and with my real ip  http://prntscr.com/9m1skq

[ocminer]

ethminer -F http://192.168.1.197:8545 -G i try with this and with my real ip  http://prntscr.com/9m1skq

Show the window ouput of the proxy please

[snikerhd]

ethminer -F http://192.168.1.197:8545 -G i try with this and with my real ip  http://prntscr.com/9m1skq

Show the window ouput of the proxy please

http://prntscr.com/9m1yiq

http://prntscr.com/9m1ytw