[Completed & Closed][WTB] 1 AMD Graphics Card Crossfire Bridge

[pekv2]

Depending on the decided price of the connector & shipping by the seller, I might be interested in a AMD Graphics Card Crossfire Bridge.

It's one of those things I could have sworn I had, but I rummaged through my house and could not find one *facepalm*.

[mufa23]

I have a bunch. Been meaning to sell them off, but keep forgetting. What size are you looking for? And are you in the US?

[segabtc]

you talking about this?

http://www.google.com/imgres?um=1&hl=en&client=firefox-a&rls=org.mozilla:en-US:official&biw=825&bih=736&tbm=isch&tbnid=yGV177-j1hTVPM:&imgrefurl=http://www.directcanada.com/products/%3Fsku%3D13630EL8490%26vpn%3DCrossFire%2520Cable%26manufacture%3DPOWERCOLOR&docid=TLeNb3j5n20nTM&imgurl=http://img.directcanada.com/images/POWERCOLOR/CrossFire_Cable/CrossFire_Cable_detail.jpg&w=600&h=300&ei=GslxUNiJKYuc8QTNl4CwBA&zoom=1&iact=hc&vpx=80&vpy=415&dur=2035&hovh=159&hovw=318&tx=149&ty=65&sig=112483042472243814553&page=1&tbnh=153&tbnw=197&start=0&ndsp=9&ved=1t:429,r:3,s:0,i:83

[pekv2]

Oops. Yep, USA. Two 5k series sapphire cards. Measured about 3 inches apart from card connector to card connector. Can be a little bit longer where they bow outwards when connected, which is fine.

[segabtc]

lemme see if i can find one here at the house.


edit: mine all say nvidia on them, sorry.

[ssateneth]

I for the life of me cannot find a driver that works with my 3 reference 5870's with reference ATI BIOS (u119). Whenever I enable crossfire, I go to a black screen and nothing else happens. The monitor is still on though, it doesnt go to standby. Furthermore, the reset button on my computer doesn't reset the computer? I have to hard power off the computer either with the power switch on the power supply or hold the power button down for 5 seconds. I was able to get -some- crossfire to work, but only with 2 cards and it was glitchy, with driver 10.11 (frame counter went up by 2's in furmark so it was skipping every other frame. Was also getting texture flickering in world of warcraft)

Does anyone know what driver I should use with crossfire or tri-fire with reference 5870's? My board is an MSI x79 big bang xpower II, cpu is i7-3930k, power supply is pc power @ cooling 950w silencer mk II, and 64gb ram.

[mufa23]

Oops. Yep, USA, Indiana. Two 5k series sapphire cards. Measured about 3 inches apart from card connector to card connector. Can be a little bit longer where they bow outwards when connected, which is fine.

I have another one that's 3 inches, but I think it might be a few millimeters too short for you. You can have either for 0.5 BTC. I can drop it off in the postbox Tuesday (I think they are closed Monday) via USPS First-Class for free. Let me know if that works.

[pekv2]

I for the life of me cannot find a driver that works with my 3 reference 5870's with reference ATI BIOS (u119). Whenever I enable crossfire, I go to a black screen and nothing else happens. The monitor is still on though, it doesnt go to standby. Furthermore, the reset button on my computer doesn't reset the computer? I have to hard power off the computer either with the power switch on the power supply or hold the power button down for 5 seconds. I was able to get -some- crossfire to work, but only with 2 cards and it was glitchy, with driver 10.11 (frame counter went up by 2's in furmark so it was skipping every other frame. Was also getting texture flickering in world of warcraft)

Does anyone know what driver I should use with crossfire or tri-fire with reference 5870's? My board is an MSI x79 big bang xpower II, cpu is i7-3930k, power supply is pc power @ cooling 950w silencer mk II, and 64gb ram.

Truthfully, I believe when I had two 5830's, I had to use "i think" 11.12CCC with SDK 2.1 or SDK 2.5, this was back in 2011, and I had the 5830's in crossfire to game. Your cards and my 5830's are 5k series, so, u might wanna give 11.11 or 11.12 a shot.

[pekv2]

Oops. Yep, USA, Indiana. Two 5k series sapphire cards. Measured about 3 inches apart from card connector to card connector. Can be a little bit longer where they bow outwards when connected, which is fine.

I have another one that's 3 inches, but I think it might be a few millimeters too short for you. You can either for 0.5 BTC. I can drop it off in the postbox Tuesday (I think they are closed Monday) via USPS First-Class for free. Let me know if that works.

Yes, I remeasured with persistence, its 2 1/2, so I believe the 3 will do just fine.

Yes, I will take it for .5 shipped.

I will PM u with my address, pm back with your btc addy.

Thanks, mufa23.

[pekv2]

Mufa23 is gonna mail off one as soon as the post office is opened in exchange for .5 btc which has been sent. Thanks, mufa23, I really appreciate it.

[mufa23]

Mufa23 is gonna mail off one as soon as the post office is opened in exchange for .5 btc which has been sent. Thanks, mufa23, I really appreciate it.

Confirming. I received payment, and will ship it the first day that the post office is open. Pleasure doing business!

[pekv2]

Mufa23 is gonna mail off one as soon as the post office is opened in exchange for .5 btc which has been sent. Thanks, mufa23, I really appreciate it.

Confirming. I received payment, and will ship it the first day that the post office is open. Pleasure doing business!

Thanks bud, received the crossfire bridge as said.

[mufa23]

Mufa23 is gonna mail off one as soon as the post office is opened in exchange for .5 btc which has been sent. Thanks, mufa23, I really appreciate it.

Confirming. I received payment, and will ship it the first day that the post office is open. Pleasure doing business!

Thanks bud, received the crossfire bridge as said.

Glad to hear you got it. Thanks!