Bitcoin Forum
November 16, 2024, 10:46:14 AM *
News: Check out the artwork 1Dq created to commemorate this forum's 15th anniversary
 
   Home   Help Search Login Register More  
Pages: [1] 2 »  All
  Print  
Author Topic: Preparing small S7 setup - Grandpa's basement  (Read 3591 times)
torepia (OP)
Full Member
***
Offline Offline

Activity: 140
Merit: 100


View Profile
September 05, 2015, 10:08:40 PM
 #1

So, I've been mining in my grandpa's basement since early 2013. This has been a win-win situation overall. He gets free heat (his whole house), and I get a location to host my miners. ^^

Here's a short vid of old setup: https://www.youtube.com/watch?v=aJ_kJLGYxRQ

To the point:
I need to build a small room to house 6x S7's to take care of the dB issue (Grandpa's not def.. yet!) and hopefully make it easier to take care of cooling (air flow control).

I decided to put up some walls in this corner of the room in the basement:

This way I can pull air in through the window, and exhaust it thru the soon to be bigger vent. + I'm going to setup some kind of "air-sluice", to be able to control how much air is exhausted inside (for heating purposes) and outside.

Dad hooked me up with some free wood: (LOL)

It's of course all wet (...), but this doesn't really matter as its a temporary setup anyway. And the miners will dry em up!

When I got back, grandpa(87) had already ripped out the vent, and taken off the window, he was excited!  Cheesy


Time 2 cut:


Todays result:



Tomorrow I'll finish the walls, aka. add wall boards like the one you see in the background of last pic. And try to figure out some kind of door.
I also need to make a box of some kind around the window, to funnel the air into the "room".

Anyone else doing something similar?
All suggestions/comments are welcome!
GermanGiant
Hero Member
*****
Offline Offline

Activity: 784
Merit: 501



View Profile
September 06, 2015, 12:33:15 AM
 #2

Is electricity cheap at your end or you have some alternative source of energy ?
torepia (OP)
Full Member
***
Offline Offline

Activity: 140
Merit: 100


View Profile
September 06, 2015, 01:21:59 AM
 #3

Is electricity cheap at your end or you have some alternative source of energy ?

0.06$/KWH, kinda cheap?
alh
Legendary
*
Online Online

Activity: 1848
Merit: 1052


View Profile
September 06, 2015, 02:38:51 AM
 #4

Do you have well over 7200W available for your closet? Six S7's will suck a fair amount of electricity. I see a single outlet. I hope it's 240V with at least 30Amps.
torepia (OP)
Full Member
***
Offline Offline

Activity: 140
Merit: 100


View Profile
September 06, 2015, 03:23:24 AM
 #5

Do you have well over 7200W available for your closet? Six S7's will suck a fair amount of electricity. I see a single outlet. I hope it's 240V with at least 30Amps.

Good question! What you see are 2 outlets, each on its own 225-230V 16A circuit.

225-230V X 16A = 3600-3680W

Each S7 rated at 1210W, ideally I shouldn't run more than 2 miners per circuit. I'm gonna try 3 anyway, might need to underclock. (I've run these at 3600W for almost 2 years Tongue) The total length in cable from outlet to circuit is about 2-2,5 meters, and there are no other outlets/connections on the wire in-between.
Another option is I got another 10A circuit on the other side of the room I could run 1 miner on, so that puts me at 5. The last one could be hosted at a secondary location I got on hand.
Option 3: I setup another 16A circuit.

I am however a little more worried about the heat! There will be 2x 125mm air outlets with a 125mm fan rated at 400 m3/h, in a push configuration.
Ventilation will be trial and error! ^^

Edit:
On a positive note, the input air temp is now around 10C, when winter comes it will be -0 to -20C. That will be interesting.
dog1965
Sr. Member
****
Offline Offline

Activity: 392
Merit: 250



View Profile
September 06, 2015, 04:06:29 AM
Last edit: September 06, 2015, 04:45:33 AM by dog1965
 #6

Do you have well over 7200W available for your closet? Six S7's will suck a fair amount of electricity. I see a single outlet. I hope it's 240V with at least 30Amps.

Good question! What you see are 2 outlets, each on its own 225-230V 16A circuit.

225-230V X 16A = 3600-3680W

Each S7 rated at 1210W, ideally I shouldn't run more than 2 miners per circuit. I'm gonna try 3 anyway, might need to underclock. (I've run these at 3600W for almost 2 years Tongue) The total length in cable from outlet to circuit is about 2-2,5 meters, and there are no other outlets/connections on the wire in-between.
Another option is I got another 10A circuit on the other side of the room I could run 1 miner on, so that puts me at 5. The last one could be hosted at a secondary location I got on hand.
Option 3: I setup another 16A circuit.

I am however a little more worried about the heat! There will be 2x 125mm air outlets with a 125mm fan rated at 400 m3/h, in a push configuration.
Ventilation will be trial and error! ^^

Edit:
On a positive note, the input air temp is now around 10C, when winter comes it will be -0 to -20C. That will be interesting.

what amount of power is the main breaker rated for Huh?

also try to blow HOT AIR OUT OF THE ROOM NOT IN then this will make the room pressure drop and it will suck cool air in from the other room or window in the room this is what I do and the room stays so much cooler.

 
Amph
Legendary
*
Offline Offline

Activity: 3248
Merit: 1070



View Profile
September 06, 2015, 07:05:18 AM
 #7

Is electricity cheap at your end or you have some alternative source of energy ?

0.06$/KWH, kinda cheap?

yeah it is, consider that you cna have profit up to 0.2 with the s7, but i'm sure thiw will not last long, when everyone will switch to the new miners the ratio will be the same as now, up to 0.1 kw/h for profit
Agaguk24
Full Member
***
Offline Offline

Activity: 242
Merit: 100


Extended Reality Advertising


View Profile
September 06, 2015, 04:34:20 PM
 #8

6 cents per kilowatt is very good... you will ROI quicker than many!

unholycactus
Legendary
*
Offline Offline

Activity: 1078
Merit: 1024



View Profile WWW
September 06, 2015, 05:10:14 PM
 #9

Is electricity cheap at your end or you have some alternative source of energy ?

0.06$/KWH, kinda cheap?

yeah it is, consider that you cna have profit up to 0.2 with the s7, but i'm sure thiw will not last long, when everyone will switch to the new miners the ratio will be the same as now, up to 0.1 kw/h for profit

It's decent and since you're recycling the heat, it makes it very well worth it, unless something bigger than I expect happens in the future.
Amph is right though, there are incredibly efficient chips that are already developed and they are about to hit the public market.
torepia (OP)
Full Member
***
Offline Offline

Activity: 140
Merit: 100


View Profile
September 06, 2015, 05:53:35 PM
 #10

Is electricity cheap at your end or you have some alternative source of energy ?

0.06$/KWH, kinda cheap?

yeah it is, consider that you cna have profit up to 0.2 with the s7, but i'm sure thiw will not last long, when everyone will switch to the new miners the ratio will be the same as now, up to 0.1 kw/h for profit

It's decent and since you're recycling the heat, it makes it very well worth it, unless something bigger than I expect happens in the future.
Amph is right though, there are incredibly efficient chips that are already developed and they are about to hit the public market.

Tbh, I'm not doing it for the profit. If I look at my mining project as a whole, I've already ROI'd this investment on my old scrypt rig. When I started mining the ltc price was 2$, I sold at 42$ Tongue
I'm doing it for the fun of it, support the network, the experience, its basically a hobby. I'm happy if I break even!

Example of hobby:
I'm in the process of building a public gapahuk in the woods("https://en.wikipedia.org/wiki/Lean-to"), with closed sleeping quarters. Which will be heated by a Ant S1, powered by solar, activated by SMS! ^^

I guess I like the idea of heating things while lowering electricity cost of that heat, by mining. If you look at it this way, ROI isn't that important. A lot of homes uses these 2000W fan-heaters to heat up their homes. If you could replace these by making silent miners out of old chips, that was practical as heaters, you could probably make a buck! ^^

alani123
Legendary
*
Offline Offline

Activity: 2590
Merit: 1512



View Profile
September 06, 2015, 05:58:37 PM
 #11

Is electricity cheap at your end or you have some alternative source of energy ?

0.06$/KWH, kinda cheap?

yeah it is, consider that you cna have profit up to 0.2 with the s7, but i'm sure thiw will not last long, when everyone will switch to the new miners the ratio will be the same as now, up to 0.1 kw/h for profit

It's decent and since you're recycling the heat, it makes it very well worth it, unless something bigger than I expect happens in the future.
Amph is right though, there are incredibly efficient chips that are already developed and they are about to hit the public market.

Tbh, I'm not doing it for the profit. If I look at my mining project as a whole, I've already ROI'd this investment on my old scrypt rig. When I started mining the ltc price was 2$, I sold at 42$ Tongue
I'm doing it for the fun of it, support the network, the experience, its basically a hobby. I'm happy if I break even!

Example of hobby:
I'm in the process of building a public gapahuk in the woods("https://en.wikipedia.org/wiki/Lean-to"), with closed sleeping quarters. Which will be heated by a Ant S1, powered by solar, activated by SMS! ^^

I guess I like the idea of heating things while lowering electricity cost of that heat, by mining. If you look at it this way, ROI isn't that important. A lot of homes uses these 2000W fan-heaters to heat up their homes. If you could replace these by making silent miners out of old chips, that was practical as heaters, you could probably make a buck! ^^

Sounds like you have a lot of money and time to waste invest. Good luck.

███████████████████████████
███████▄████████████▄██████
████████▄████████▄████████
███▀█████▀▄███▄▀█████▀███
█████▀█▀▄██▀▀▀██▄▀█▀█████
███████▄███████████▄███████
███████████████████████████
███████▀███████████▀███████
████▄██▄▀██▄▄▄██▀▄██▄████
████▄████▄▀███▀▄████▄████
██▄███▀▀█▀██████▀█▀███▄███
██▀█▀████████████████▀█▀███
███████████████████████████
 
 Duelbits 
██
██
██
██
██
██
██
██

██

██

██

██

██
TRY OUR UNIQUE GAMES!
    ◥ DICE  ◥ MINES  ◥ PLINKO  ◥ DUEL POKER  ◥ DICE DUELS   
█▀▀











█▄▄
 
███
▀▀▀
███
▀▀▀
███
▀▀▀
███
▀▀▀

███
▀▀▀
███
▀▀▀
 
███
▀▀▀

███
▀▀▀
███
▀▀▀
███
▀▀▀
███
▀▀▀
███
▀▀▀
 
███
▀▀▀
███
▀▀▀
███
▀▀▀
███
▀▀▀

███
▀▀▀
███
▀▀▀
 
███
▀▀▀
███
▀▀▀
███
▀▀▀

███
▀▀▀
███
▀▀▀
███
▀▀▀
 
███
▀▀▀
███
▀▀▀

███
▀▀▀
███
▀▀▀
███
▀▀▀

███
▀▀▀
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
 KENONEW 
 
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
▀▀█











▄▄█
10,000x
 
MULTIPLIER
██
██
██
██
██
██
██
██

██

██

██

██

██
 
NEARLY
UP TO
50%
REWARDS
██
██
██
██
██
██
██
██

██

██

██

██

██
[/tabl
torepia (OP)
Full Member
***
Offline Offline

Activity: 140
Merit: 100


View Profile
September 06, 2015, 06:21:41 PM
 #12

Is electricity cheap at your end or you have some alternative source of energy ?

0.06$/KWH, kinda cheap?

yeah it is, consider that you cna have profit up to 0.2 with the s7, but i'm sure thiw will not last long, when everyone will switch to the new miners the ratio will be the same as now, up to 0.1 kw/h for profit

It's decent and since you're recycling the heat, it makes it very well worth it, unless something bigger than I expect happens in the future.
Amph is right though, there are incredibly efficient chips that are already developed and they are about to hit the public market.

Tbh, I'm not doing it for the profit. If I look at my mining project as a whole, I've already ROI'd this investment on my old scrypt rig. When I started mining the ltc price was 2$, I sold at 42$ Tongue
I'm doing it for the fun of it, support the network, the experience, its basically a hobby. I'm happy if I break even!

Example of hobby:
I'm in the process of building a public gapahuk in the woods("https://en.wikipedia.org/wiki/Lean-to"), with closed sleeping quarters. Which will be heated by a Ant S1, powered by solar, activated by SMS! ^^

I guess I like the idea of heating things while lowering electricity cost of that heat, by mining. If you look at it this way, ROI isn't that important. A lot of homes uses these 2000W fan-heaters to heat up their homes. If you could replace these by making silent miners out of old chips, that was practical as heaters, you could probably make a buck! ^^

Sounds like you have a lot of money and time to waste invest. Good luck.

Thanks, lol!
rkinnin
Sr. Member
****
Offline Offline

Activity: 316
Merit: 250


View Profile
September 07, 2015, 12:17:36 AM
 #13

Is electricity cheap at your end or you have some alternative source of energy ?

0.06$/KWH, kinda cheap?

Where are you located?
lajz99
Hero Member
*****
Offline Offline

Activity: 756
Merit: 500


View Profile
September 07, 2015, 02:02:38 AM
 #14

Look forward to following along.  Good to see there are still some smaller projects out there!

torepia (OP)
Full Member
***
Offline Offline

Activity: 140
Merit: 100


View Profile
September 07, 2015, 02:22:49 PM
 #15

Is electricity cheap at your end or you have some alternative source of energy ?

0.06$/KWH, kinda cheap?

Where are you located?

Norway! Smiley
torepia (OP)
Full Member
***
Offline Offline

Activity: 140
Merit: 100


View Profile
September 07, 2015, 02:25:39 PM
 #16

Look forward to following along.  Good to see there are still some smaller projects out there!

Thanks! Feel free to paste links to other projects if you know any!  (Inspiration appreciated)Smiley
torepia (OP)
Full Member
***
Offline Offline

Activity: 140
Merit: 100


View Profile
September 07, 2015, 02:47:56 PM
 #17

Update:




Making a "vent shaft" from the window, to the bottom of the miner-room. This is where the fresh air is gonna come in to cool off the miners.
This will hopefully prevent snow from blowing in on those nasty days as well! I'm considering installing some kind of filter over the window to filter-out the dust particles. Dust is what killed my GPU-rigs, tho the S1's haven't been affected by the dust. I guess the ASIC fans are a bit more "heavy duty", compared to GPU fans.

One of the boards is becoming a door, so that I can access the room from the "hot-side" of the rack I'm placing in there.
The idea is to use plexiglass or something similar, to make the rack air tight, so that all the cold air are forced to go threw the miners.

I wish I had the patience to learn SketchUp! ^^
LimitedDev
Newbie
*
Offline Offline

Activity: 14
Merit: 0


View Profile
September 07, 2015, 03:23:29 PM
 #18

Grandpa wil go bankrupt on the electricity.
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
September 07, 2015, 03:43:16 PM
 #19

Grandpa wil go bankrupt on the electricity.

I was just thinking the same 6 S7's would be over 7k watts.    Even if he has cheap electricity hes paying a lot for the cooling he's getting from these.

You really should think about paying your grandpa for some of the power.  I do like the setup.... just man that is a lot of power to make someone pay.
nero987
Sr. Member
****
Offline Offline

Activity: 259
Merit: 250


View Profile
September 07, 2015, 03:56:25 PM
 #20

This looks like a really nice project Smiley
Looking forward to any updates...

About the energy costs, I guess grandpa gets his share, nah?  Grin
Pages: [1] 2 »  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!