Bitcoin Forum
April 24, 2024, 07:37:38 AM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: Problem running 4x 5830, please help!  (Read 3459 times)
MufflerMan (OP)
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
June 03, 2011, 08:35:23 PM
 #1

Hi guys, new to forums and have a problem I hope you can help with.

I was running 2x 5830's on a P55A-UD4P (Gigabyte) mobo and decided to order 2 more 5830's and couple of 1x > 16x adapters to use the two x1 slots. So everything got here and I tried adding the new cards using dummy plugs - the system would fire up, but could not get a video signal. With 3 cards the same thing happened. So I decided to go back to just 2x cards to see if it would get a signal.. it did, but now everything is really messed up. Everything is very slow to load, anti-virus won't load at all, internet only connects for a second, then stops.. just a big mess really.

Any reason the 1x slots would not handle these cards and any idea why it messed my computer so badly??

I don't know as much about this stuff as you guys do, so any help is appreciated beyond comprehension.  Kiss

Thanks!

1713944258
Hero Member
*
Offline Offline

Posts: 1713944258

View Profile Personal Message (Offline)

Ignore
1713944258
Reply with quote  #2

1713944258
Report to moderator
1713944258
Hero Member
*
Offline Offline

Posts: 1713944258

View Profile Personal Message (Offline)

Ignore
1713944258
Reply with quote  #2

1713944258
Report to moderator
1713944258
Hero Member
*
Offline Offline

Posts: 1713944258

View Profile Personal Message (Offline)

Ignore
1713944258
Reply with quote  #2

1713944258
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
Meatball
Sr. Member
****
Offline Offline

Activity: 378
Merit: 250



View Profile
June 03, 2011, 08:52:24 PM
 #2

What OS and what's your PSU?
MufflerMan (OP)
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
June 03, 2011, 08:54:20 PM
 #3

What OS and what's your PSU?

Windows 7 64
Antec TP Quattro 1200w
Meatball
Sr. Member
****
Offline Offline

Activity: 378
Merit: 250



View Profile
June 03, 2011, 08:56:19 PM
 #4

Found this on another forum.

If you plan on x-fire with two GPUs down stream and plan on using sata6/USB3, the P55a is not for you. If you enable USB3/Sata6 (1) you downgrade the 1st pci-e slot from 16 X to 8 X (not a biggie), HOWEVER, (2) you totally lose the 2nd PCI-e slot.

Any chance you can try disabling the USB3/Sata6 in the bios?
MufflerMan (OP)
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
June 03, 2011, 09:04:14 PM
 #5

Found this on another forum.

If you plan on x-fire with two GPUs down stream and plan on using sata6/USB3, the P55a is not for you. If you enable USB3/Sata6 (1) you downgrade the 1st pci-e slot from 16 X to 8 X (not a biggie), HOWEVER, (2) you totally lose the 2nd PCI-e slot.

Any chance you can try disabling the USB3/Sata6 in the bios?

I was under the impression that when using the second PCIe x16 slot it would automatically disable USB3/SATA6. I'm pretty sure there isn't an option in BIOS, but I'll check to make sure. You think it could have an effect on the x1 slots?

I finally got most of my desktop to load and fired up Phoenix to see what would happen. The main card will not hash, but the slave card will. This is very strange to me..

Thanks for the help so far.
Meatball
Sr. Member
****
Offline Offline

Activity: 378
Merit: 250



View Profile
June 03, 2011, 09:08:29 PM
 #6

Yeah, I'm not sure.  I've never seen USB/Sata disabling PCIexpress slots before, so I'm guessing it's sharing interrupts or the bus or something.

Also, I've had luck running Catalyst 11.5's and Stream 2.4 or 2.1 on Win7 x64
MufflerMan (OP)
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
June 03, 2011, 10:17:26 PM
 #7

Yeah, I'm not sure.  I've never seen USB/Sata disabling PCIexpress slots before, so I'm guessing it's sharing interrupts or the bus or something.

Also, I've had luck running Catalyst 11.5's and Stream 2.4 or 2.1 on Win7 x64

Yea, I'm using 11.5 and 2.4 atm.

So I checked BIOS and there were some USB3 options. Disable controller and ability to choose EHCI or XHCI.  You think either would help? I may try to put the adapters and cards back in if you think it's worth a shot.



Freakin
Full Member
***
Offline Offline

Activity: 154
Merit: 100


View Profile
June 03, 2011, 10:35:41 PM
 #8

Yeah, I'm not sure.  I've never seen USB/Sata disabling PCIexpress slots before, so I'm guessing it's sharing interrupts or the bus or something.

Also, I've had luck running Catalyst 11.5's and Stream 2.4 or 2.1 on Win7 x64

Yea, I'm using 11.5 and 2.4 atm.

So I checked BIOS and there were some USB3 options. Disable controller and ability to choose EHCI or XHCI.  You think either would help? I may try to put the adapters and cards back in if you think it's worth a shot.





try diasbling the controller
twitcoins
Newbie
*
Offline Offline

Activity: 39
Merit: 0


View Profile
June 03, 2011, 10:53:33 PM
 #9

Have you done the pinout mod on the PCIe extenders?  Poke around the forums, something about voltage you need to bump up or short out or some such.  Can't recall exactly, I'm not using ribbons myself.
pokermon919
Member
**
Offline Offline

Activity: 84
Merit: 10


View Profile
June 03, 2011, 11:03:13 PM
 #10

Have you done the pinout mod on the PCIe extenders?  Poke around the forums, something about voltage you need to bump up or short out or some such.  Can't recall exactly, I'm not using ribbons myself.

For some mother boards you will have to short 2 pins on the 1x slot to get it to work. I had to do this, but I find it strange that you're 16x slots won't work.

Here's the blog that details this, http://blog.zorinaq.com/?e=42
twitcoins
Newbie
*
Offline Offline

Activity: 39
Merit: 0


View Profile
June 03, 2011, 11:05:19 PM
 #11

That's the one, thanks pokermon Smiley
pokermon919
Member
**
Offline Offline

Activity: 84
Merit: 10


View Profile
June 03, 2011, 11:18:08 PM
 #12

Just here to help and learn with fellow miners   Cheesy
Meatball
Sr. Member
****
Offline Offline

Activity: 378
Merit: 250



View Profile
June 03, 2011, 11:31:26 PM
 #13

Yeah, I'd disable those controllers and see if that helps.  If not, try that shorting the pins that poker mentioned.
MufflerMan (OP)
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
June 04, 2011, 12:58:20 AM
 #14

Thanks, I will try both of these suggestions when I get home..
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!