MobileCash, First PoCh coin (Proof of Charity)

[jk_14]

Too bad, the solo mining with this algorithm, does not work!

I found a bug in the new cpuminer 1.2 with the new algorithm lyre2REv2.

It does not detect the address of payment even if the configuration is correct. How do you think can solve? I'm not the only one to have these problems

Same problem with vertcoin and similar!  

under linux:

Code:

root@vps179585:~/cpuminer-multi# ./cpuminer -a lyra2rev2 -o stratum+tcp://localhost:4401 -u vuser -p MMKMju9ybRpHPe37n8GLWWGZ3hjKS1cv6R -t 1
** cpuminer-multi 1.2-dev by Tanguy Pruvot (tpruvot@github) **
BTC donation address: 1FhDPLPpw18X4srecguG3MxJYe4a1JsZnd

[2015-09-24 16:02:08] 1 miner threads started, using 'lyra2rev2' algorithm.
[2015-09-24 16:02:08] Starting Stratum on stratum+tcp://localhost:4401
[2015-09-24 16:02:08] Stratum difficulty set to 0.1
[2015-09-24 16:02:08] localhost:4401 lyra2rev2 block 373317
[2015-09-24 16:02:10] CPU #0: 62.21 kH/s
[2015-09-24 16:02:16] CPU #0: 63.28 kH/s
[2015-09-24 16:02:16] accepted: 0/1 (0.00%), 63.28 kH/s nooooo
[2015-09-24 16:02:16] reject reason: DB_None instance has no attribute 'update_worker_diff'
[2015-09-24 16:02:38] CPU #0: 63.01 kH/s
[2015-09-24 16:02:38] accepted: 1/2 (50.00%), 63.01 kH/s yes!
[2015-09-24 16:02:39] CPU #0: 64.68 kH/s
[2015-09-24 16:02:39] accepted: 2/3 (66.67%), 64.68 kH/s yes!

could you try to use such syntax :

-o stratum+tcp://localhost:4401 -u vuser -p M...

[1714936593]

1714936593

[1714936593]

1714936593

[1714936593]

1714936593

[1714936593]

1714936593

[1714936593]

1714936593

[1714936593]

1714936593

[chris190]

Too bad, the solo mining with this algorithm, does not work!

I found a bug in the new cpuminer 1.2 with the new algorithm lyre2REv2.

It does not detect the address of payment even if the configuration is correct. How do you think can solve? I'm not the only one to have these problems

Same problem with vertcoin and similar!  

under linux:

Code:

root@vps179585:~/cpuminer-multi# ./cpuminer -a lyra2rev2 -o stratum+tcp://localhost:4401 -u vuser -p MMKMju9ybRpHPe37n8GLWWGZ3hjKS1cv6R -t 1
** cpuminer-multi 1.2-dev by Tanguy Pruvot (tpruvot@github) **
BTC donation address: 1FhDPLPpw18X4srecguG3MxJYe4a1JsZnd

[2015-09-24 16:02:08] 1 miner threads started, using 'lyra2rev2' algorithm.
[2015-09-24 16:02:08] Starting Stratum on stratum+tcp://localhost:4401
[2015-09-24 16:02:08] Stratum difficulty set to 0.1
[2015-09-24 16:02:08] localhost:4401 lyra2rev2 block 373317
[2015-09-24 16:02:10] CPU #0: 62.21 kH/s
[2015-09-24 16:02:16] CPU #0: 63.28 kH/s
[2015-09-24 16:02:16] accepted: 0/1 (0.00%), 63.28 kH/s nooooo
[2015-09-24 16:02:16] reject reason: DB_None instance has no attribute 'update_worker_diff'
[2015-09-24 16:02:38] CPU #0: 63.01 kH/s
[2015-09-24 16:02:38] accepted: 1/2 (50.00%), 63.01 kH/s yes!
[2015-09-24 16:02:39] CPU #0: 64.68 kH/s
[2015-09-24 16:02:39] accepted: 2/3 (66.67%), 64.68 kH/s yes!

could you try to use such syntax :

-o stratum+tcp://localhost:4401 -u vuser -p M...

no, it does not work, I've tried!

[jk_14]

no, it does not work, I've tried!

I'm not sure if you have modified some fields in config.py file, e.g.:

root@vps179585:~# cat stratum-lyra-1/conf/config.py | grep MM
MM_HOST = 'localhost'
MM_PORT = 14414
MM_USER = 'muser'
MM_PASSWORD = 'mpassword'

if not, just for sure try such mobilecash.conf

Code:

rpcuser=muser
rpcpassword=mpassword
blocknotify=/root/stratum-lyra-1/blocknotify.sh --host localhost --port 4401 --password your_password

[chris190]

I use windows and in the configuration folder I have this



I have this in the miner.bat

[jk_14]

I use windows and in the configuration folder I have this

why not give a chance to linux, then

[jk_14]

two news...

the good one:
MBL is supposed to be on C-cex exchange soon (sooner than next voting )
and the not very:
MBL on Coinotron - will be delayed (due to: work overload)

[hashbrown9000]

OK, i decided to install the windows wallet and just do normal solo-mining with my kopiemtu rigs.  I am finding blocks using DJM34's lyrarv2 miner but when the block is found, it does not accept (0/2 boooooooooo!!)

Must I use the cpuminer provided by you, jk?

[jk_14]

OK, i decided to install the windows wallet and just do normal solo-mining with my kopiemtu rigs.  I am finding blocks using DJM34's lyrarv2 miner but when the block is found, it does not accept (0/2 boooooooooo!!)

Must I use the cpuminer provided by you, jk?

my cpuminer is rather for testing purpose - and it was rather usefull during low difficulty

Code:

[2015-09-24 23:00:35] Stratum difficulty set to 0.1
[2015-09-24 23:00:35] accepted: 368/421 (87.41%), 29.39 kH/s nooooo
[2015-09-24 23:00:35] reject reason: DB_None instance has no attribute 'update_worker_diff'
[2015-09-24 23:00:41] localhost:4401 lyra2rev2 block 373492
[2015-09-24 23:00:41] CPU #0: 29.07 kH/s
[2015-09-24 23:00:47] CPU #0: 26.95 kH/s
[2015-09-24 23:00:47] accepted: 369/422 (87.44%), 26.95 kH/s yes!
[2015-09-24 23:01:42] CPU #0: 29.55 kH/s
[2015-09-24 23:01:49] CPU #0: 30.56 kH/s
[2015-09-24 23:01:49] accepted: 370/423 (87.47%), 30.56 kH/s yes!
[2015-09-24 23:02:52] CPU #0: 29.17 kH/s
[2015-09-24 23:03:35] CPU #0: 29.74 kH/s
[2015-09-24 23:03:35] accepted: 371/424 (87.50%), 29.74 kH/s yes!

and no single block from several hours...

[The Cryptophilanthropist]

OK, i decided to install the windows wallet and just do normal solo-mining with my kopiemtu rigs.  I am finding blocks using DJM34's lyrarv2 miner but when the block is found, it does not accept (0/2 boooooooooo!!)

Must I use the cpuminer provided by you, jk?

I believe ccminer for Lyra2v2 will only work for pool mining. You are better off at this point to go to the console and type in "setgenerate true"
(minus the quotes) However this will use your entire cpu to mine, if you do not want to use all cpu cores add the following to your conf file
"genproclimit=3"  (no quotes of course) this will use 3 of 4 cores assuming your cpu is a 4 core.

[hashbrown9000]

I've got a farm of GPUs to mine with so I wouldn't use CPUs.

[chris190]

I've got a farm of GPUs to mine with so I wouldn't use CPUs.

Did you try the new miner updated?

https://www.thisisvtc.com/topic59.html

[hashbrown9000]

yes i tried SP_'s and DJM's miners and neither works for mobilecash

[chris190]

perhaps the solo cpu-gpu mining does not work with Lyra2REv2, I did the test with vtc in pool and It works great!  

The old algorithm Lyra2re also works with solo cpu/gpu mining,  this not. I do not know why!  

[hashbrown9000]

OK, is anyone else besides dev using kopiemtu to GPU mine this coin?  Merge-mined or not?

[DragonSlayer]

FYI, I am using SP ccminer on local p2pool with no issue.  This is set as merge mining, not solo.  I can confirm that sgminer is working as well using dmj34 version.

[hashbrown9000]

would i be able to run both vertcoin and mobilecash wallets in windows and then merge mine the coins from my kopiemtu rigs over my LAN?

[DragonSlayer]

You should be able too.  I am very weak with Linux.  I am all setup on mostly Win10 boxes.  You will need to setup p2pool for vtc.

[hashbrown9000]

can you detail your install in windows? (merge-mining portion)

[chrysophylax]

watching ...

the algo is new - the project is new - but the dev is not ...

will be interesting to see how it all goes ...

#crysx

[wildduck]

I`m mining a few hours for a wallet just to see how it goes.