
October 03, 2015, 06:59:02 PM 

ANTMINER S7 BATCH 3
S7 Specifications:
1. Hash Rate: 4.86 TH/s ±5%
2. Power Consumption: 1210 W (at the wall, with APW3, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.25 J/GH (at the wall, with APW3, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 12.0V+5%, should not be less than 12.0V
5. Chip quantity per unit: 162x BM1385
6. Dimensions: 301mm(L)*123mm(W)*155mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 600M _______________________________________________________________________________ _______________________________________ ANTMINER S7 BATCH 2
S7 Specifiche tecniche:
1. Hash Voto: 4.66 TH / s ± 5%
2. Consumo: 1160 W (il muro, con APW3, efficienza 93%, 25C ambient temp)
3. Efficienza energetica: 0.25 J / GH (il muro, con APW3, efficienza 93%, 25 ° C temperatura ambiente)
4. Tensione nominale: 12.0V + 5%, non deve essere inferiore a 12.0V
5. Chip quantità per unità: 162x BM1385
6. Dimensioni: 301mm (L) * 123 millimetri (W) * 155 millimetri (H)
7. Raffreddamento: 2x 12038 fan
Temperatura 8. esercizio: 0 ° C a 40 ° C
9. Connessione di rete: Ethernet
10. Default Frequency: 575M
who tells us that buying antminer s7 batch 3 (4.86 th / s
They send antminer s7 batch 2? (4,66 th / s)
amount of chips are equal, the difference is in default frequency
575 MB vs. 600 MB?
so if I buy the second batch, and put the firmware of batch 3? I can do it?
Since the amount of the chips are equal?
correct me if I'm wrong.
