{WTS} Antminer C1 & S3+ (US)

[BlInK311]

ALL UNITS SOLD

Hey guys,
I have 2 miners that I am willing to sell.  Just checking if there is any interest.
First is a Antminer C1 with an upgraded pump, upgraded hose clamps, and enough fluid to fill the system. Second is a Antminer S3+ with stock fans.
The S3+ runs flawlessly.  Unfortunately, I damaged one of the hashing boards in the C1 when I was testing a water-cooled s5.  So 3 of the 4 boards are fully functional in the C1.  (the 4th board is still in the unit, just doesn't communicate with the controller for some reason, might be an easy fix)

Looking to sell the C1 . -3 out of 4 boards working  --SOLD--
Looking to sell the S3+ ----  SOLD
I would love a local pickup (Northern New Jersey)  but I am also willing to ship within the USA.

https://www.dropbox.com/s/hh3i2nyk0afm5mj/2015-10-04%2020.56.13.jpg?dl=0
https://www.dropbox.com/s/d0dbbltzwfuwimq/antminerC1-62.jpg?dl=0
https://www.dropbox.com/s/9vkcg5e9cb2tofa/antminerS3plus-104.jpg?dl=0

**NEW STATUS OF C1**
https://www.dropbox.com/s/cfz1nly7ahu1pmi/2015-11-22%2000.12.39.png?dl=0

Updated picture with name and date:


Payment address: 16nuqjK3o8BejUwMC1CLFfGg9zQRHCXgLQ

[BlInK311]

Dropped prices.  everything is OBO.  so if you have any interest ask here or shoot me a pm

[fairuz545]

How much
All include postage to pahang 26100 malaysis..
Best price can do?

[BlInK311]

How much
All include postage to pahang 26100 malaysis..
Best price can do?

I am only shipping within the USA.  Sorry. 

[rkinnin]

Hey guys,
I have 2 miners that I am willing to sell.  Just checking if there is any interest.
First is a Antminer C1 with an upgraded pump, upgraded hose clamps, and enough fluid to fill the system. Second is a Antminer S3+ with stock fans.
Both units run flawlessly at stock speeds as well as underclocked speeds for better efficiency.

Both of these have been underclocked all summer long with no hickups at all.
Looking to sell the C1 for $200.
Looking to sell the S3+ for $75.
I can do a packaged deal for both $250.
I would love a local pickup but I am also willing to ship within the USA.

https://www.dropbox.com/s/hh3i2nyk0afm5mj/2015-10-04%2020.56.13.jpg?dl=0
https://www.dropbox.com/s/d0dbbltzwfuwimq/antminerC1-62.jpg?dl=0
https://www.dropbox.com/s/9vkcg5e9cb2tofa/antminerS3plus-104.jpg?dl=0

local pickup?  where are you? 

[BlInK311]

local pickup?  where are you? 

I'm sure that would be helpful to include.  Sorry about that.
Located in northern New Jersey.

[fairuz545]

Do you ship to malaysia...
How much shipping to
State pahang
Poscode 26100
City kuantan
Country malaysia

[javierfjavier]

tje s3+ is still available? How much the shipping to FL 33166?

[wikkidtt]

Shoot me a Pm

[BlInK311]

tje s3+ is still available? How much the shipping to FL 33166?

$18 shipping for the S3+

[BlInK311]

Shoot me a Pm

Sent... why couldnt you send me a pm?

[BlInK311]

bump with new picture including name and date in first post.

[Keegan_Betarigs]

$70 for the s3+ shipped to 61254

[BlInK311]

$70 for the s3+ shipped to 61254

I appreciate the offer but I am not in a dire need to sell so Ill stick with $85 shipped in the USA.

[BlInK311]

SOLD S3+

[gecox22]

Sent you a offer through PM on the C1. 100 plus shipping to 03582 in New Hampshire. No response yet.

[BlInK311]

Sent you a offer through PM on the C1. 100 plus shipping to 03582 in New Hampshire. No response yet.

Sorry for the delayed response (also responded to your pm just now). 
I am looking for closer to $150 + shipping.  Thanks for the offer.

[shanerc563]

I am interested in the S#, but I have a few questions.  What will I all need in order to start mining?  Why are only 3 of the 4 boards working?  What is wrong with the 4th board and can it be replaced?  Why are you no longer running these miners?  When you were running them, did you make anything off of the and if so what?  Would you take BTC for payment?

[BlInK311]

I am interested in the S#, but I have a few questions.  What will I all need in order to start mining?  Why are only 3 of the 4 boards working?  What is wrong with the 4th board and can it be replaced?  Why are you no longer running these miners?  When you were running them, did you make anything off of the and if so what?  Would you take BTC for payment?

I have sold and shipped the S3+ so it is no longer available.  

The C1 is still available and I still have it hashing for me.  The functional 3 boards are running 24/7 for me without any issues.  In order to start mining you will need to reassemble the cooling system, hook up a power supply, connect to an internet connection, and setup your pools.  

One of the boards I damaged while removing it and reinstalling it.  I removed it to try and test fit a s5 board to the water block.  I wasn't happy with the results so I reinstalled the c1 board.  It didn't work again, not sure what went wrong.  And yes, you can replace it with an s3 or s3+ hashing board and it will work

Yes I am accepting BTC as payment.  I just listed $ price because BTC fluctuates so much.  If you need a power supply, I can sell you my EVGA 1300 G2 for $120...in BTC of course.

[gecox22]

I am interested in the S#, but I have a few questions.  What will I all need in order to start mining?  Why are only 3 of the 4 boards working?  What is wrong with the 4th board and can it be replaced?  Why are you no longer running these miners?  When you were running them, did you make anything off of the and if so what?  Would you take BTC for payment?

I think you are getting confused between the S3 and C1. But I have answered your question below with my responses in red. I have also added in a question of my own for the Owner.

First Question I am interested in the S#, but I have a few questions. This has already been sold. The owner already said that.

Second Question. (Why are only 3 of the 4 boards working?) He already state this as well. He damaged it while trying liquid cooling his s5. He doesn't know what is wrong with it but it may be a simple fix. The board is still in the unit, it just doesn't communicate with the controller.
 
Third question. What is wrong with the 4th board and can it be replaced? Answer the first part of the question in the second question. The second part yes it can be replaced if you find another board.

Fourth question. Why are you no longer running these miners? He is still running the miners.

Fifth question. When you were running them, did you make anything off of the and if so what? I can not answer this for sure since I am not the owner. But I am sure he did make money off them or he wouldn't still be running them. As for how much since the C1 is only running around 800ghs you can do the calculation. But since I do not know what you are paying for power it is hard for me to calculate. If you had free power you could make around 14 bucks a week. Depending on luck. It could be more or less.

Sixth and final question. Would you take BTC for payment? Yes he takes BTC


Now a question for the Owner from me. This is about the C1 in the photo you provided it shows all 4 hash board communicating. And the 4th board shows 00000000 00000000 So is it a problem with communication or something else. I would think if it wasn't communicating then it would not show up under the chains right or it would have x's instead of 0. Or am I wrong?