WTB Antrouter R1 / Broken Miners

[ncsupanda]

Looking to pick one of these Antrouters up.

Also looking to continue some work I started a few months back (finally settled after switching jobs) so if you have broken miners that you want to offload post them here as well.

I only deal in BTC and accept escrow. I'll also pay any escrow fees, should they apply.

Thanks all.

[1715493116]

1715493116

[1715493116]

1715493116

[1715493116]

1715493116

[ncsupanda]

Still looking for these.

[ncsupanda]

Last attempt. Sell me your unprofitable / broken miners.

[realchlorum]

broken antminer s3 with 180-220 ghs

[ncsupanda]

broken antminer s3 with 180-220 ghs

So it has a blade that isn't working? Cost?

[valkir]

Are you in US ? I have 2 new R1 in Mtl.

let me know

[realchlorum]

broken antminer s3 with 180-220 ghs

So it has a blade that isn't working? Cost?

i assume.

What do you offer?

[ncsupanda]

broken antminer s3 with 180-220 ghs

So it has a blade that isn't working? Cost?

i assume.

What do you offer?

Depends on where you are shipping from, of course. With a broken blade it is basically a more efficient S1, so not much.

[notabeliever]

I have a broken plug that is for an Antrouter v1. I just need a new plastic end cover with folder plug attached. The metal leads are intact.

I have an avalon 6 with one working board hashes nicely at 1.5 - 1.8 tb+ . Need a new hash board.

[isoneguy]

you might be 10 months late on this one...what do you want for the a6?

[buckrogers]

I have the antrouter , it works, but the plug is a little screwy, you need to press it on the side for it to stay on lol

probably an easy adjustment for someone who knows how...what would you pay for it?

I have all original stuff it came with. --- tried it for 1 day then back in the box

Thanks!

[buckrogers]

I also have a bitcrane watercooled T-110-S

The Original control card got fried, but the boards worked last time i checked, it got fried when i attempted to change the PSU, and i didn't have the correct little sata 5v power for the board, and poof

Have all the parts : the 2 boards and case ...no card.

let me know what you can offer.

thanks!

[ncsupanda]

I also have a bitcrane watercooled T-110-S

The Original control card got fried, but the boards worked last time i checked, it got fried when i attempted to change the PSU, and i didn't have the correct little sata 5v power for the board, and poof

Have all the parts : the 2 boards and case ...no card.

let me know what you can offer.

thanks!

The card you dont have being the controller card?

I have the antrouter , it works, but the plug is a little screwy, you need to press it on the side for it to stay on lol

probably an easy adjustment for someone who knows how...what would you pay for it?

I have all original stuff it came with. --- tried it for 1 day then back in the box

Thanks!

Location? Shipping matters with a unit this cheap.

[buckrogers]

I also have a bitcrane watercooled T-110-S

The Original control card got fried, but the boards worked last time i checked, it got fried when i attempted to change the PSU, and i didn't have the correct little sata 5v power for the board, and poof

Have all the parts : the 2 boards and case ...no card.

let me know what you can offer.

thanks!

The card you dont have being the controller card?

I have the antrouter , it works, but the plug is a little screwy, you need to press it on the side for it to stay on lol

probably an easy adjustment for someone who knows how...what would you pay for it?

I have all original stuff it came with. --- tried it for 1 day then back in the box

Thanks!

Location? Shipping matters with a unit this cheap.

Hi,

Yes, the cubie board that came with the bitcrane got the power connector fried, I can include it if you want it, or you can easily buy a replacement one.

For the AntRouter  its just as mentioned above, works fine, probably needs the plug to the outlet adjusted so it stays on.

Shipping from NY, USA