Hello all, first post, and hoping someone might be able to help me out here. So here's what I got going on right now.
I'm running several Blackarrow X3's. One, and now two, have stopped connecting to the network, the url is not working, and comes up saying refresh. So far I have tried updating the units firmware, based on instructions here:
http://ecointalk.net/topic/2385-x3-system-gone-help-how-can-i-flash-an-image/ and here:
http://ecointalk.net/topic/2314-guide-latest-official-ba-prospero-x1-firmware-version-2014-12-19-16-04-v117-v18/There is no change at all with the unit. The screen works sometimes, usually right after being booted up. The android guy laying on his back popped up once, but not since any attempt to update the firmware. Before I start going through and attempting to swap out board with a different burned unit, what are any options to get this working?
For updating the firmware, I used the Rockchip software, and could get the SD card to take the upgrade firmware option, but couldn't make the SD boot option work. That might be the issue there, but I don't know how to get that working.
Thanks for any help, still learning about how to get these machines to work best.