IBM DPS-4KW PSU (Dual DPS-2000BB) Breakout Boards and Packages!!!

[Finksy]

Please see here for IBM 2880W PSU Packages: https://bitcointalk.org/index.php?topic=966135

Please note, at this time I am unable to source dependable DPS-2000BB PSU's.  I can sell breakout boards and packages without PSU's, but until the market gets more units available I can't rely on having them available when orders are placed.

Please see here for GPU rig powering packages with all adapters necessary to run rigs off these PSU's!  https://bitcointalk.org/index.php?topic=1864539



I am happy to finally start offering for sale J4bberwock's dual DPS-2000BB, IBM 4K PSU packages and breakout boards for North America.  As always, pricing will be the same as J4bberwock's on the boards. Sideplates and hardware now available for purchase separately, but are also included in price of breakout boards and PSU packages.

PACKAGE DEALS

Standard 4K Package - $240

 - 1x Standard 4K Breakout Board
 - 2x DPS-2000 PSU's
 - 16x 24" PCIe cables
 - 1x Steel sideplate and hardware for mounting fans
 - 2x 120mm hydraulic bearing 180CFM fans
Order components without PSU's for $135
For Voltage adjustment, Voltmeter & Early-Rev PSU's, add $11)


The "Triple A Package" - $285

 - 1x Standard 4K Breakout Board
 - 2x DPS-2000 PSU's
 - 30x 24" PCIe cables
 - 2x C19 power cables of choice (see below for stock)
 - 1x Steel sideplate and hardware for mounting fans
 - 2x 120mm hydraulic bearing 180CFM fans
Order components without PSU's for $190
For Voltage adjustment, Voltmeter & Early-Rev PSU's, add $11)


The "Deluxe 4K" Package - $305

Enough cables to fill board, mixing and matching lengths for flexibility
 - 1x Standard 4K Breakout Board
 - 2x DPS-2000 PSU's
 - 15x 24" PCIe cables
 - 15x 36" HQ PCIe cables
 - 2x C19 power cables of choice (see below for stock)
 - 1x Steel sideplate and hardware for mounting fans
 - 2x 120mm hydraulic bearing 180CFM fans
Order components without PSU's for $205
For Voltage adjustment, Voltmeter & Early-Rev PSU's, add $11)

The "Big Momma" 8KW Package - $720
(Add a 50A circuit and go big, with PDU included for clean, simple & safe install)
 - 4x DPS-2000 PSU's
 - 2x Standard 4K Breakout Boards
 - 2x Steel sideplates and hardware for mounting fans
 - 1x 50A 4-port PDU with 15A breakers for each circuit (40A continuous)
 - 30x 24" PCIe cables
 - 30x 36" Deluxe PCIe cables
 - 4x C19 power cables of choice (see below for stock)
 - 4x 120mm hydraulic bearing 180CFM fans
Order components without PSU's for $500
For Voltage adjustment, Voltmeter & Early-Rev PSU's, add $22)

NOTE: 120mm fans are notnow included in packages, and are required to cool PSU's.  Each 4k (dual DPS-2000) PSU setup with board will require 2x 120mm fans with suggested min airflow of 140 CFM to be able to use full rated output of PSU's. The fans supplied are 120x38mm with approximately 180CFM of airflow, and are approximately 50-55dB.  If you are interested in a quieter setup, I can price packages out without the fans and you can source your own.

Individual pricing
Note: Bulk pricing is available, please contact me.

DPS-4K Breakout board, including steel sideplate and hardware for fan mounting: $75
-Adjustable voltage and voltmeter option: $11

Individual steel sideplates and hardware for mounting fans (8x #8 machine screws, 8x #8 washers, 8x #8 nuts): $18



120mm 180CFM hydraulic-bearing case fans - $12 each


DPS-2000BB PSU (refurbished):  Includes ground shipping in the US (Please request early-revision PSU's if you require voltage adjustment feature)  Currently out of stock and unable to find stable supply


I can supply PCI cables in two different configurations:

-36" Deluxe, high quality 16awg PCIe cables made in USA - $4.40 each (IN STOCK)


-24" standard 16 AWG cables - $2.50 each


C19 to C20 cables (14awg) - $12 each  


C19 to NEMA 5-15P (14awg) - $12

C19 to NEMA 6-20P (12awg) - $12

40A continuous-rated PDU (requires 50A circuit): $120


24A continuous-rated PDU (requires 30A circuit): $60


60A 3-Phase Delta current-monitored PDU with remote access: $400
 


LEASING CONTRACTS

I have started to offer leasing packages for use in approved Data Centre/Co-locations.  This can be beneficial for many reasons:

-Less upfront capital required, allowing more to be spent on additional mining hardware which can offset much or all of the cost of the lease

-Limits risk and cost of equipment failure, and associated down time due to failures

-Saves shipping costs for heavy PSU's to and from hosting location for duration of your contract

-No equipment depreciation

-Helps eliminate ownership problems associated with Group Buys, when more than 1 member shares purchase price of PSU to host together

-All maintenance, replacement, shipping, setup, and lost revenue from down-time due to PSU failure is my responsibility

Please contact me for details.

Shipping prices will be estimated as follows:

CANADA
1-10 boards -$10
11-20 boards  -$15

USA
Shipping with tracking (from Canada)

1-3 boards     -$15
4-7 boards     -$20  
8-20 boards   -$25  
Insurance is additional, and is tied to shipment value.

Shipping for orders with Cables, PDU's or PSU's will be calculated individually, to make sure you are getting the best rate.  All prices are in USD. I am willing to accept escrow through OGNasty, and can also do Paypal but buyer will be responsible for covering costs of either services (4% added to paypal, OG charges 1% for escrow).

Each package of PSU, breakout board & 10x PCI cables is approximately 16 lbs.  Shipping to most of USA is approximately $30 for 15 Lbs, $50 for 30 Lbs, $65 for 45 lbs

The BTC address for all non-escrow breakout board orders is here: 1GWQYCv22cAikgTgT1zFuAmsJ9fFqq9TXf
I will not PM you asking for payments to any other address, so beware of F1nksy, Fink5y, or whatever scammy names might pop up.  

[hawkfish007]

Good stuff! payment sent for 2 boards w/ adj. voltmeters 

[nhando]

Definitely interested.  Will PM you for more details.

[philipma1957]

Please see here for IBM 2880W PSU Packages: https://bitcointalk.org/index.php?topic=966135
I am happy to finally start offering for sale J4bberwock's dual DPS-2000BB, IBM 4K PSU packages and breakout boards for North America.  As always, pricing will be the same as J4bberwock's on the boards. At this time, I am still waiting on a local machinist to finish up design and production of sideplates.  I am really hoping to have them in hand around the first week of January. I will keep everyone posted, but at this time you will have to make provisions to mount the fans yourself. Due to the width of the double-stacked DPS-2000's, 120mm Fans fit perfectly along the side. Please see Phillip's review page for ideas: https://bitcointalk.org/index.php?topic=1284563.0;topicseen   or wait for an update re: sideplates

PACKAGE DEALS

Standard 4K Package - $175
Add C19 cables & 120mm fans, enough to power 4x Avalon 6
 - 1x Standard 4K Breakout Board
 - 2x DPS-2000 PSU's
 - 16x 24" PCIe cables
For Voltage adjustment, Voltmeter & Early-Rev PSU's, add $20)

The "Triple A Package" - $225
Everything required but fans to power 3x Antminer S7's
 - 1x Standard 4K Breakout Board
 - 2x DPS-2000 PSU's
 - 30x 24" PCIe cables
 - 2x C19-C20 cables
For Voltage adjustment, Voltmeter & Early-Rev PSU's, add $20)

The "Deluxe 4K" Package - $245
Enough cables to fill board, mixing and matching lengths for flexibility
 - 1x Standard 4K Breakout Board
 - 2x DPS-2000 PSU's
 - 15x 24" PCIe cables
 - 15x 36" HQ PCIe cables
 - 2x C19-C20 cables
For Voltage adjustment, Voltmeter & Early-Rev PSU's, add $20)

The "Big Momma" 8KW Package - $570
(Add a 50A circuit and go big, with PDU included for clean, simple & safe install)
 - 4x DPS-2000 PSU's
 - 2x Standard 4K Breakout Boards
 - 1x 50A 4-port PDU with 15A breakers for each circuit (40A continuous)
 - 30x 24" PCIe cables
 - 30x 36" Deluxe PCIe cables
 - 4x C19-C20 cables
For Voltage adjustment, Voltmeter & Early-Rev PSU's, add $40)

NOTE: 120mm fans are not included in packages, but are required to cool PSU's.  Each 4k (dual DPS-2000) PSU setup with board will require 2x 120mm fans with suggested min airflow of 80 CFM to be able to use full rated output of PSU's. I am currently looking for fans in bulk at this time to supply with packages.

Individual pricing
Note: Bulk pricing is available, please contact me.

Straight board pricing (J4bberwock's prices):

Standard board without voltage adjustment:
1-25 boards total ordered -> 57$
26-50 boards total ordered -> 54$
51-100 boards total ordered -> 50$
over 100 boards total ordered -> 47$

Options:
Sideplate: $6 Waiting on machinist to finish
Adjustable voltage option: $5.5
Voltmeter with pin header matching the boards: $5.5

DPS-2000BB PSU (refurbished): $42 ea, (+$5 for early-rev PSU's)

I can supply PCI cables in two different configurations:

-36" Deluxe, high quality ~15 AWG 1.35mm² cables (J4bberwock's design) - $4.00 each (IN STOCK)

-24" standard 16 AWG cables - $2.50 each (IN STOCK)

C19 to C20 cables - $12 each   (IN STOCK)
C19 to NEMA 5-15P - $16 each (IN STOCK)

For PDU's, please contact me for options and pricing.

LEASING CONTRACTS

I have started to offer leasing packages for use in approved Data Centre/Co-locations.  This can be beneficial for many reasons:

-Less upfront capital required, allowing more to be spent on additional mining hardware which can offset much or all of the cost of the lease

-Limits risk and cost of equipment failure, and associated down time due to failures

-Saves shipping costs for heavy PSU's to and from hosting location for duration of your contract

-No equipment depreciation

-Helps eliminate ownership problems associated with Group Buys, when more than 1 member shares purchase price of PSU to host together

-All maintenance, replacement, shipping, setup, and lost revenue from down-time due to PSU failure is my responsibility

Please contact me for details.

Shipping prices will be estimated as follows:

CANADA
1-10 boards -$10
11-20 boards  -$15

USA
Shipping with tracking (from Canada)

1-3 boards     -$15
4-7 boards     -$20  
8-20 boards   -$25  
Insurance is additional, and is tied to shipment value.

Shipping for orders with Cables, PDU's or PSU's will be calculated individually, to make sure you are getting the best rate.  All prices are in USD. I am willing to accept escrow through OGNasty, and can also do Paypal but buyer will be responsible for covering costs of either services (4% added to paypal, OG charges 1% for escrow).

Each package of PSU, breakout board & 10x PCI cables is approximately 16 lbs.  Shipping to most of USA is approximately $30 for 15 Lbs, $50 for 30 Lbs, $65 for 45 lbs

The BTC address for all non-escrow breakout board orders is here: 1JMMfWNx8htHQ9EnwGy3FXamrq8S69HU4g
I will not PM you asking for payments to any other address, so beware of F1nksy, Fink5y, or whatever scammy names might pop up.  

I did a long review on finsky/j4bberwock   2x 2000 psu's


Frankly I like them better then the 2880watt  mostly because they are in my garage and they are a lot quieter.

They come with the 30 pcie jack break out board  so 3 s-7's or 4 avalon sixes.   I will post a link to the review.

https://bitcointalk.org/index.php?topic=1284563.0;all

the 2x 2000 psu package is giving my 17 amps x 240 volts = 4080 watts running 2 avalon sixes and 1 s-7  with really good numbers

[nhando]

Ordered a package today.   Money sent FINKSY.  This board is sweet, also will be wanting some FAN mounts when they're available.  I'm sure I'll be back for more of these boards.  Will there be an option to change the voltage for the 2980 PSU in the future?

[Finksy]

No, unfortunately J4bberwock has mentioned that voltage control is not possible on the 2880/2980W IBM PSU's.  PM'd you back, thank you

[chey]

Can we see a picture of this setup?

[Prelude]

Very nice! May I ask why the older revision PSUs fetch a slightly higher price?

[Finksy]

At this time I am finding them harder to source with certainty (that they are older revision), whereas the non-voltage-adjustable units can use any of the DPS-2000BB PSU.

[generalt]

Can't wait until you get the side plates done.  Is it better to have the fans push air into the PSU or pull air out?  I assume a push/pull setup with 4 fans would be overkill and you would only need one side plate per 4k psu pair.

[nhando]

Can't wait until you get the side plates done.  Is it better to have the fans push air into the PSU or pull air out?  I assume a push/pull setup with 4 fans would be overkill and you would only need one side plate per 4k psu pair.

I have my 2 FANs sitting at the bottom pushing air up and it's sufficient.  2 x Ultra KAZA fans for $35 on Amazon.  No need to waste an extra $35 on more fans.  Pushing air side ways was ok too.  These fans are quiet and can do 3K RPM.  You won't hear them while the S7 is running.    Please see Phillip's post for the detail different layouts and pics.

https://bitcointalk.org/index.php?topic=1284563.new#new

[generalt]

Can't wait until you get the side plates done.  Is it better to have the fans push air into the PSU or pull air out?  I assume a push/pull setup with 4 fans would be overkill and you would only need one side plate per 4k psu pair.

I have my 2 FANs sitting at the bottom pushing air up and it's sufficient.  2 x Ultra KAZA fans for $35 on Amazon.  No need to waste an extra $35 on more fans.  Pushing air side ways was ok too.  These fans are quiet and can do 3K RPM.  You won't hear them while the S7 is running.    Please see Phillip's post for the detail different layouts and pics.

https://bitcointalk.org/index.php?topic=1284563.new#new

Thanks nhando.  I read his post and saw your pictures.  Just waiting for finsky to get the side plates in stock now.

[HerbPean]

At this time I am finding them harder to source with certainty (that they are older revision), whereas the non-voltage-adjustable units can use any of the DPS-2000BB PSU.

Finksy can you tell us which revision we need to look for ?

thanks

[generalt]

Very nice! May I ask why the older revision PSUs fetch a slightly higher price?

Finksy can you give us this information please ?

thanks

I believe that those are harder to find and those are the ones that you can modify the voltage.

Any word on the side plates yet?

[HerbPean]

Very nice! May I ask why the older revision PSUs fetch a slightly higher price?

Finksy can you give us this information please ?

thanks

I believe that those are harder to find and those are the ones that you can modify the voltage.

Any word on the side plates yet?

My bad i quoted the wrong question !

/fixed

At this time I am finding them harder to source with certainty (that they are older revision), whereas the non-voltage-adjustable units can use any of the DPS-2000BB PSU.

Finksy can you tell us which revision we need to look for ?

thanks

[generalt]

Finksy can you tell us which revision we need to look for ?

thanks

I could be wrong but from what I remember you need S8 or below.  Somebody please correct me if I am wrong.

Edit see here: https://bitcointalk.org/index.php?topic=1178099.msg13061344#msg13061344

[J4bberwock]

Finksy can you tell us which revision we need to look for ?

thanks

I could be wrong but from what I remember you need S8 or below.  Somebody please correct me if I am wrong.

Yes, S8 or below if you want to use the external voltage adjust.
DPS2500BB will not work for voltage adjust.

If you don't need voltage adjust, any revision will be fine.

[HerbPean]

Finksy can you tell us which revision we need to look for ?

thanks

I could be wrong but from what I remember you need S8 or below.  Somebody please correct me if I am wrong.

Yes, S8 or below if you want to use the external voltage adjust.
DPS2500BB will not work for voltage adjust.

If you don't need voltage adjust, any revision will be fine.

Merci (Thanks)

[nhando]

Finksy,

You got PM for more orders. 

P.S Are the FAN mounts ready for selling yet?

[nhando]

Anyone hear from Finksy at all?  Wonder if he's on vacation or just super busy.