Beware of scammers; Confirm with me before sending payment
2.8BTC Sold
Includes the S5+ with original box + 2x S5 controllers, 3x lan cables, and 1x 4 port 10/100 wired router.
Price includes USPS Priority Mail shipping; but I will not ship outside the Continental US
Miner will be insured and
signature will be required.
I added front fan grills.
Miners are currently set to freq 325 hashing at ckpool:
Total:
http://solo.ckpool.org/users/13X3zaotVdAcXnhW8oa8UJhAbWF55oBBNoLeft Third:
http://solo.ckpool.org/workers/13X3zaotVdAcXnhW8oa8UJhAbWF55oBBNo.LRight Third:
solo.ckpool.org/workers/13X3zaotVdAcXnhW8oa8UJhAbWF55oBBNo.RMiddle Third:
http://solo.ckpool.org/workers/13X3zaotVdAcXnhW8oa8UJhAbWF55oBBNo.MPlease Note: I made 2x power adapters by joining the 4 pin connector to a female 6 pin pcie adapter which can be used with any PSU. I spliced the cables, wrapped them in electrical tape and used velcro as a makeshift sleeve.
At freq 350 a 1/3 hashes at ~ 2.75 TH/s using ~ 1250 watts
At freq 325 a 1/3 hashes at ~ 2.55 TH/s using ~ 1129 watts
At freq 275 a 1/3 hashes at ~ 2.20 TH/s using ~ 970 watts
with the S5 controller ( loaded with the newest S5 firmware ) you can change the fan speed ( the S5+ firmware doesn't allow this ). With most ambient temps you can run these at 50%; which is a lot quieter than 100% but IT IS STILL LOUD.
The S5+ controller is currently loaded with S5 firmware. I will include all original ribbon cables so you can reload the original S5+ firmware and run all 3x as 1 miner. I don't recommend doing this; I have ran these for 4 months with no problems using less power ( because of fan speed reduction ).
If you run the miners at freq 275 each uses ~970 watts; you can run the fan at 30% and get ~2.2 TH. This is a lot quieter.
You MUST only use 1 PSU per hashblade. Bitmain has made it clear that damage is likely if you fail to do so.
You MUST use 3x pcie per hashboard ( not worth the risk, just order some splitters off amazon if you don't have enough pcie)
You MUST power on all hashboards before the controller (if only using one PSU you avoid this problem)
Each third requires 10x pcie connectors.
( If you need PSU's I can also sell 3x EVGA 1300 G2 PSU's ( each with 2x splitters + a jumper ) for 1
BTC shipped )
IP is set to DHCP
Username / Password is the default: root / root
Will ship well packaged in original box, double boxed with foam / bubblewrap.
Thanks to Tupsu for testing S5 controllers with S5+ hashboards and providing me with the controller pin out.
please review my trust feedback
many pictures @
http://postimg.org/gallery/m1hetr2a/