[WTS] Last gen miners - Dragon miners, SP10, S4, etc

[Finksy]

Looking to see if there's any interest for these.  I have some older equipment that I am looking to move, need to make some electrical room for incoming miners.

2x Dragon Miner 2.3 TH/s (1 had water damage, still hashes at full spec) + 1 extra unit with burnt PSU's for spare parts/to salvage. May try replacing PSU's and getting it going if there's interest. BTC2.5 for all 3 as they sit
1x Dragon miner 1 TH/s (PSU is bad.  Will try to find another) BTC0.3 w/out PSU, BTC0.45 with PSU Pending
3x AsicMiner Tubes with Block Erupter controllers (1 of them has a bad board) BTC0.5 for all 3 w/ controllers SOLD
1x SP10 BTC0.7 SOLD
1x Antminer S4 with good original PSU (never had PSU problems) BTC1.2 SOLD

Everything is + shipping.

Flexible on price, PM me with any offers, including parting these out for hashboard, controlers, PSU's.  Prefer not to ship whole units, as it wouldn't really be worth it due to weight.  Located in Ontario, Canada.  Some of these are offline, but can provide pictures/status page for any interested parties.

[1714701695]

1714701695

[1714701695]

1714701695

[1714701695]

1714701695

[VirosaGITS]

Looking to see if there's any interest for these.  I have some older equipment that I am looking to move, need to make some electrical room for incoming miners.

3x Dragon Miner 2.3 TH/s (1 had water damage, still hashes at full spec)
1x Dragon miner 1 TH/s
3x AsicMiner Tubes with Block Erupter controllers (1 of them has a bad board)
1x SP10
1x Antminer S4 with good original PSU (never had PSU problems)

Flexible on price, PM me with any offers, including parting these out for hashboard, controlers, PSU's.  Prefer not to ship whole units, as it wouldn't really be worth it due to weight.  Located in Ontario, Canada.  Some of these are offline, but can provide pictures/status page for any interested parties.

I'd grab the S4 depending on the price, we probably get a good shipping rate or maybe meet face to face if you go by Ottawa sometimes. Could also be interested in the Tubes for parts, depending on how much you are looking for those, as well.

[wikkidtt]

What's your postal code? Even if shipping would expensive would you still ship. Interested in a s4 or the sp10

[thedreamer]

Hey bud. Maybe we can deal again.
Shoot me a pm about the S4. We'll talk.
Thanks

[gecox22]

Wanted to inquire pricing on the 1th dragon. I am located in New Hampshire 03582. Thanks

[Finksy]

Postal code is P1B 1A1, I get pretty good shipping rates through commercial account.  Shipping an S4 to NY $37, to FL $45, and $55 to AZ or CA for reference.  SP10 will be close, possibly a few dollars less than S4. For Canadian shipping you can calculate by CanadaPost to see if it's worth it to you. Replying to PM's as soon as I can. 

I will ship on buyer's dollar, though for some of the bigger guys (Dragon Miner 2.3's weigh around 50 lbs or so) is just not worth it.  I can break it down to hashing blades and PSU's if anyone wants it.

[thedreamer]

Don't forget VAT..
Last time I bought the SP20's from you (OR S5's not sure) I got hit with a $48 import tax fee from the fedex or UPS. I forgot who.

[realestone]

Looking to see if there's any interest for these.  I have some older equipment that I am looking to move, need to make some electrical room for incoming miners.

2x Dragon Miner 2.3 TH/s (1 had water damage, still hashes at full spec) + 1 extra with burnt PSU's for spare parts. May try replacing and getting it going if there's interest.
1x Dragon miner 1 TH/s (PSU is bad.  Will try to find another)
3x AsicMiner Tubes with Block Erupter controllers (1 of them has a bad board)
1x SP10
1x Antminer S4 with good original PSU (never had PSU problems)

Flexible on price, PM me with any offers, including parting these out for hashboard, controlers, PSU's.  Prefer not to ship whole units, as it wouldn't really be worth it due to weight.  Located in Ontario, Canada.  Some of these are offline, but can provide pictures/status page for any interested parties.

how much would you want for the S4?

[toptek]

Don't forget VAT..
Last time I bought the SP20's from you (OR S5's not sure) I got hit with a $48 import tax fee from the fedex or UPS. I forgot who.

Fedex willing to best plus they will lie to you . had it happen once then lie about it then told me there was no charge, i was still charged.



how much for the 2 Dragon Miner

[Finksy]

OK, so there is more interest than I anticipated.  Here's how pricing is going to go.  Using US$0.05/KwH & 4% difficulty, prices will be determined by roughly ROI'ing in BTC in 4 months (minus cost of PSU for PSU-less miners) given current exchange.  Prices in BTC added to the OP.

[toptek]

OK, so there is more interest than I anticipated.  Here's how pricing is going to go.  Using US$0.05/KwH & 4% difficulty, prices will be determined by roughly ROI'ing in BTC in 4 months (minus cost of PSU for PSU-less miners) given current exchange.  Prices in BTC added to the OP.

just need a price for the 2 Dragon Miner ofc break them down to hash boards if poss depends how much shipping is , if that's ok . shipping is gonna kill it, i know .

I live in the US zip is  21012. PSU won't be a problem as long as they hash

Sorry, didn't want to seem rude . I wasn't, I went and looked it up 1600 watts at the wall , i can only do so much with a 200 amp service and i have just about maxed out my first 220 line, i had put in.  

I'll have to pass due to space for power at that price . but am thinking about the 1 th as long as it hashes ?.  no PSU to cut down on shipping how much with shipping with no PSU ?.


and how much for one of the 2.3 th miners . i have the coins or cash can convert it just need some more hash power.

[Finksy]

OK, so there is more interest than I anticipated.  Here's how pricing is going to go.  Using US$0.05/KwH & 4% difficulty, prices will be determined by roughly ROI'ing in BTC in 4 months (minus cost of PSU for PSU-less miners) given current exchange.  Prices in BTC added to the OP.

just need a price for the 2 Dragon Miner ofc break them down to hash boards if poss depends how much shipping is , if that's ok . shipping is gonna kill it, i know .

I live in the US zip is  21012. PSU won't be a problem as long as they hash .

Shipping even for all the parts would be around $90, but would include the controller board, RasPi and hashboards from the 3rd Dragon miner as well.

[Finksy]

Everything except for the 2.3 TH/s dragon miners are either sold or confirmed pending funds. 

[nor9865]

Everything except for the 2.3 TH/s dragon miners are either sold or confirmed pending funds. 

i might be interested in the 2 dragon + if you repair the 3rd one i will take it too. shipping within USA itself.
but i have one condition, i am a very neat person, i expect it to be clean and look like new.
(but still, i cannot confirm now, probably in a few days)

[generalt]

I believe that Finsky is going to be away from his computer until next Friday or so.

[nor9865]

I believe that Finsky is going to be away from his computer until next Friday or so.

thanks for the headsup