Problem with 7 ANT Miner U3 IN MY Home

[aalive]

Hello people im From albania kosovo
and im register here to need Help


Soo i have 7 Miner u3 in my home and just 4 working in My Computer When i added More not working when i added just 5 Not working
In pc working just 4 Miner u3 240 GHS But i need To Connected More but not working


Thanks so much if u can help me any here ?

[dime2spend]

Did you connect the U3s directly with your computer or with the help of an USB(2)-Hub?

In case you don't already have an external powered USB2-Hub, you will need one (but not sure if one is sufficient). I only have 2 U3s and I run them also with a HUB but I'm not sure if I could connect 7 U3s over this HUB even though it offers exactly 7 USB2-Slots.

[hurricandave]

U3 doesn't share resources very well. The easiest work around is to add  --usb :4    to the end of your batchfile . Then you can open a second instance with the same batchfile and the other three will work fine.

[aalive]

thanks for that but what USB HUB To buy tell me what adpter need to get the usb hub please send to me more proof

[notlist3d]

thanks for that but what USB HUB To buy tell me what adpter need to get the usb hub please send to me more proof

U3's have their own power bricks or some use PSU adapters.  So the USB hub is not as big of thing with them as it is with say a compac that runs off of usb power.

My biggest advice is get a R1 and use Crazy Guy's firmware to control you U3's.  It will make your life easy with the zombie detection.  I used a cheap usb 2.0 hub with the R1 and U3's and it worked fine.