![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 04, 2016, 12:07:07 AM |
|
Hello!, i'm brand new to mining and decided to pick up a few miners off of ebay just to check it out, and obviously since they were ebay bought, one is not functioning properly, hopefully someone will be able to help diagnose this issue
[ASIC STATS] 2.6.14 Uptime:5 | FPGA ver:100 | BIST in 0 -----BOARD-0----- PSU[UNKNOWN]: 0->(0w/0w)[0 0 0] (->0w[0 0 0]) (lim=288) 0c 353GH cooling:0/0x0 -----BOARD-1----- PSU[UNKNOWN]: 0->(0w/0w)[0 0 0] (->0w[0 0 0]) (lim=288) 0c 355GH cooling:0/0x0 -----BOARD-2----- PSU[UNKNOWN]: 0->(0w/0w)[0 0 0] (->0w[0 0 0]) (lim=288) 0c 343GH cooling:0/0x0 -----BOARD-3----- PSU[UNKNOWN]: 0->(0w/0w)[0 0 0] (->0w[0 0 0]) (lim=288) 0c 358GH cooling:0/0x0 LOOP[0] ON TO:0 (w:0) 0: DC2DC/1/:[vlt1:0 vlt2:688(DCl:794 Tl:794 Ul:749) 0W 0A 0c] ASIC:[ 85c (125c) 900hz(BL: 900) 0 (E:190) F:0 L:0] 1: DC2DC/1/:[vlt1:0 vlt2:688(DCl:794 Tl:794 Ul:749) 0W 0A 0c] ASIC:[ 85c (125c) 930hz(BL: 930) 0 (E:193) F:0 L:0] LOOP[1] ON TO:0 (w:0) 2: DC2DC/1/:[vlt1:0 vlt2:688(DCl:794 Tl:794 Ul:749) 0W 0A 0c] ASIC:[ 85c (125c) 870hz(BL: 870) 0 (E:193) F:0 L:0] 3: DC2DC/1/:[vlt1:0 vlt2:688(DCl:794 Tl:794 Ul:749) 0W 0A 0c] ASIC:[ 85c (125c) 970hz(BL: 970) 0 (E:193) F:0 L:0] LOOP[2] ON TO:0 (w:0) 4: DC2DC/1/:[vlt1:0 vlt2:688(DCl:794 Tl:794 Ul:749) 0W 0A 0c] ASIC:[ 85c (125c) 870hz(BL: 870) 0 (E:193) F:0 L:0] 5: DC2DC/1/:[vlt1:0 vlt2:688(DCl:794 Tl:794 Ul:749) 0W 0A 0c] ASIC:[ 85c (125c) 910hz(BL: 910) 0 (E:193) F:0 L:0] LOOP[3] ON TO:0 (w:0) 6: DC2DC/1/:[vlt1:0 vlt2:688(DCl:794 Tl:794 Ul:749) 0W 0A 0c] ASIC:[ 85c (125c) 930hz(BL: 930) 0 (E:193) F:0 L:0] 7: DC2DC/1/:[vlt1:0 vlt2:688(DCl:794 Tl:794 Ul:749) 0W 0A 0c] ASIC:[ 85c (125c) 930hz(BL: 930) 0 (E:191) F:0 L:0]
[H:HW:1410Gh (500),DC-W:0,L:0,A:8,MMtmp:0 TMP:(28/28)=>=>=>(35/35 , 35/35)] Pushed 0 jobs , in HW queue 0 jobs (sw:3, hw:3)! min:1 wins:0[this/last min:0/0] bist-fail:16, hw-err:0 leading-zeroes:0 idle promils[s/m]:1000/0, rate:0gh/s asic-count:8 (wins:0+0) wall watts:0 Fan:80, conseq:0 AC2DC BAD: 0 0 R/NR: 0/2 RTF asics: 0 FET: 0:9 1:9 0 restarted 0 reset 0 reset2 0 fake_wins 0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble 0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn 0 purge_queue3 0 bad_idle 0 err_murata Adapter queues: rsp=0, req=0
[EVENTS]
04/02 00:04:57: Started! 04/02 00:05:08:Testing LOOPs (verbose=1) 04/02 00:05:09:ERROR: Loop failed 0 ! 04/02 00:05:09:Testing LOOPs done = ret=1 04/02 00:05:09:Data Timeout on read fffe:70 (1), (problem:1) 04/02 00:05:09:restart_asics_full (read timeout on problem or AC2DC fail) 04/02 00:05:09:Testing LOOPs (verbose=0) 04/02 00:05:09:ERROR: Loop failed 0 ! 04/02 00:05:09:Testing LOOPs done = ret=1 04/02 00:05:10:Testing LOOPs (verbose=0) 04/02 00:05:10:ERROR: Loop failed 0 ! 04/02 00:05:10:Testing LOOPs done = ret=1 04/02 00:05:10:Loop missing in discovery 0 (code 5) 04/02 00:05:10:Not all ASICs recover Minergate died and restarted Cgminer died and restarted 04/02 00:05:13: Started! Cgminer died and restarted
After I start the system, it just cycles CGMiner on and off, and makes no attempt at hashing
|