Minepeon on RP2 NOT working but Raspbian is No problem

[bravocharlie]

Hey guys!

The subject says it all. I have a new RaspberryPi2. Raspbian had no problems loading on the RP2. I formatted the SD card and loaded Minepeon .2.4.6 from Sourceforge and nothing is popping up on the screen. Looked at my router to see if its connected to the network since its hardwired and nothing. I also tried other SD cards and older versions of minepeon including .2.4.5 and .2.4.4

Please help!!! Thanks

[michelem]

Hey guys!

The subject says it all. I have a new RaspberryPi2. Raspbian had no problems loading on the RP2. I formatted the SD card and loaded Minepeon .2.4.6 from Sourceforge and nothing is popping up on the screen. Looked at my router to see if its connected to the network since its hardwired and nothing. I also tried other SD cards and older versions of minepeon including .2.4.5 and .2.4.4

Please help!!! Thanks

You need to upgrade the Raspbian packages. You need to use a Raspberry1 do the upgrade and then you can use the SD Card on any Raspberry (1 or 2)

You can upgrade packages with:

Code:

sudo apt-get update
sudo apt-get upgrade

Or just use Minera, it's ready yet http://getminera.com