voteformeg
Legendary
Offline
Activity: 1932
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 10:04:28 AM |
|
[Suspicious link removed] works? , because i do not see any coin in my wallet and pool keep saying 33 blocks pending and 66 blocks confirmed
Maturity is 120 blocks. tanx for answer , nice wallet btw.
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 10:13:25 AM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
voteformeg
Legendary
Offline
Activity: 1932
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 10:44:09 AM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
hhmmm , i hope they pm'ed you with a solution , i am waiting for a suprnovapool so i can see what i have mined
|
|
|
|
voteformeg
Legendary
Offline
Activity: 1932
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 04:50:23 PM |
|
anyway , recieving amounts now in my wallet
|
|
|
|
Eclipse Crypto (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 07:16:56 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Did you manually compile the secp256k library that we included in the repository? Also, just for clarifications, can you provide autoconf and automake versions?
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 07:35:35 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Did you manually compile the secp256k library that we included in the repository? Also, just for clarifications, can you provide autoconf and automake versions? I tried both, manually and just automatic through your makefile. autoconf --version autoconf (GNU Autoconf) 2.69 automake --version automake (GNU automake) 1.15
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
chrisvl
Legendary
Offline
Activity: 1274
Merit: 1006
Trainman
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 07:51:14 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Did you manually compile the secp256k library that we included in the repository? Also, just for clarifications, can you provide autoconf and automake versions? I tried both, manually and just automatic through your makefile. autoconf --version autoconf (GNU Autoconf) 2.69 automake --version automake (GNU automake) 1.15 i have compile eclipsed
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:05:18 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Did you manually compile the secp256k library that we included in the repository? Also, just for clarifications, can you provide autoconf and automake versions? I tried both, manually and just automatic through your makefile. autoconf --version autoconf (GNU Autoconf) 2.69 automake --version automake (GNU automake) 1.15 i have compile eclipsed So what were your steps to do so ?
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
Eclipse Crypto (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:35:15 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Secp is not broken itself. The autoconf includes are. This is indeed a bug with the build scripts. It looks like we tested fresh builds from the private repo at bitbucket, but somehow the repository did not fully transfer correctly to github, where we did a fresh git init. We are making and testing a repo fix now. It really would have been better for someone to post the error message sooner. We can't test under every possible condition, and testing does not always find the bugs. It's obvious in hindsight that we should have done build testing from the public repo. We did many build tests from the private.
|
|
|
|
chrisvl
Legendary
Offline
Activity: 1274
Merit: 1006
Trainman
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:39:07 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Did you manually compile the secp256k library that we included in the repository? Also, just for clarifications, can you provide autoconf and automake versions? I tried both, manually and just automatic through your makefile. autoconf --version autoconf (GNU Autoconf) 2.69 automake --version automake (GNU automake) 1.15 i have compile eclipsed So what were your steps to do so ? cd eclipse/src/secp256k1 replace the secp256k1 folder with bitcoin secp256k1 folder on makefile.unix remove the line 274 make -f makefile.unix
|
|
|
|
chrisvl
Legendary
Offline
Activity: 1274
Merit: 1006
Trainman
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:40:45 PM |
|
dev send me 2 coins ERocMVnN9VdMvWiJbvgtWo9pLM9qJFt2Ue to check if eclipsed working correctly
|
|
|
|
Maicol792
Legendary
Offline
Activity: 1260
Merit: 1010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:42:33 PM |
|
dev we can merge Eclipse whit BitcoinUltra (BTCU)?
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:44:32 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Did you manually compile the secp256k library that we included in the repository? Also, just for clarifications, can you provide autoconf and automake versions? I tried both, manually and just automatic through your makefile. autoconf --version autoconf (GNU Autoconf) 2.69 automake --version automake (GNU automake) 1.15 i have compile eclipsed So what were your steps to do so ? cd eclipse/src/secp256k1 replace the secp256k1 folder with bitcoin secp256k1 folder on makefile.unix remove the line 274 make -f makefile.unix I was thinking about replacing the secp with bitcoin's secp but the dev states it's a special version with some mods.. so it would make no sense if that's actually working ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
chrisvl
Legendary
Offline
Activity: 1274
Merit: 1006
Trainman
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:48:10 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Did you manually compile the secp256k library that we included in the repository? Also, just for clarifications, can you provide autoconf and automake versions? I tried both, manually and just automatic through your makefile. autoconf --version autoconf (GNU Autoconf) 2.69 automake --version automake (GNU automake) 1.15 i have compile eclipsed So what were your steps to do so ? cd eclipse/src/secp256k1 replace the secp256k1 folder with bitcoin secp256k1 folder on makefile.unix remove the line 274 make -f makefile.unix I was thinking about replacing the secp with bitcoin's secp but the dev states it's a special version with some mods.. so it would make no sense if that's actually working ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ./eclipsed getinfo { "version" : "v1.0.0.0-g", "mode" : "full", "state" : "Full Node", "protocolversion" : 60017, "walletversion" : 10500, "balance" : 0.00000000, "eclipsebalance" : 0.00000000, "newmint" : 0.00000000, "stake" : 0.00000000, "reserve" : 0.00000000, "blocks" : 739, "timeoffset" : -2, "moneysupply" : 1275959.00550400, "connections" : 10, "datareceived" : "111.24 KB", "datasent" : "60.44 KB", "proxy" : "", "ip" : "iebbi7wttlv5rdfg.onion", "difficulty" : { "proof-of-work" : 16337219.17622585, "proof-of-stake" : 128405.33843578 }, "testnet" : false, "keypoolsize" : 101, "paytxfee" : 0.00020000, "mininput" : 0.00000000, "errors" : "" }
|
|
|
|
DeCrypterManiac
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:48:13 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Secp is not broken itself. The autoconf includes are. This is indeed a bug with the build scripts. It looks like we tested fresh builds from the private repo at bitbucket, but somehow the repository did not fully transfer correctly to github, where we did a fresh git init. We are making and testing a repo fix now. It really would have been better for someone to post the error message sooner. We can't test under every possible condition, and testing does not always find the bugs. It's obvious in hindsight that we should have done build testing from the public repo. We did many build tests from the private. So there was no (working) source available since launch and you could mine all the blocks yourself until you release the working version.. nice..
|
|
|
|
voteformeg
Legendary
Offline
Activity: 1932
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:49:52 PM |
|
dev send me 2 coins ERocMVnN9VdMvWiJbvgtWo9pLM9qJFt2Ue to check if eclipsed working correctly
send
|
|
|
|
Bank_sy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:50:50 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Secp is not broken itself. The autoconf includes are. This is indeed a bug with the build scripts. It looks like we tested fresh builds from the private repo at bitbucket, but somehow the repository did not fully transfer correctly to github, where we did a fresh git init. We are making and testing a repo fix now. It really would have been better for someone to post the error message sooner. We can't test under every possible condition, and testing does not always find the bugs. It's obvious in hindsight that we should have done build testing from the public repo. We did many build tests from the private. So there was no (working) source available since launch and you could mine all the blocks yourself until you release the working version.. nice.. There has been pool for some time now it's up on superninjapool.tk now. There was something funky with validating the daemon address for pool payout. I imagine it has to do with stealth, but I think it's all set.
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:51:07 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Did you manually compile the secp256k library that we included in the repository? Also, just for clarifications, can you provide autoconf and automake versions? I tried both, manually and just automatic through your makefile. autoconf --version autoconf (GNU Autoconf) 2.69 automake --version automake (GNU automake) 1.15 i have compile eclipsed So what were your steps to do so ? cd eclipse/src/secp256k1 replace the secp256k1 folder with bitcoin secp256k1 folder on makefile.unix remove the line 274 make -f makefile.unix I was thinking about replacing the secp with bitcoin's secp but the dev states it's a special version with some mods.. so it would make no sense if that's actually working ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ./eclipsed getinfo { "version" : "v1.0.0.0-g", "mode" : "full", "state" : "Full Node", "protocolversion" : 60017, "walletversion" : 10500, "balance" : 0.00000000, "eclipsebalance" : 0.00000000, "newmint" : 0.00000000, "stake" : 0.00000000, "reserve" : 0.00000000, "blocks" : 739, "timeoffset" : -2, "moneysupply" : 1275959.00550400, "connections" : 10, "datareceived" : "111.24 KB", "datasent" : "60.44 KB", "proxy" : "", "ip" : "iebbi7wttlv5rdfg.onion", "difficulty" : { "proof-of-work" : 16337219.17622585, "proof-of-stake" : 128405.33843578 }, "testnet" : false, "keypoolsize" : 101, "paytxfee" : 0.00020000, "mininput" : 0.00000000, "errors" : "" } Hmm interesting.. Than the secp is NOT special and just a normal version... Which version/revision of secp did you use, I just tried with the latest version from the secp github but it looks like it is too new, its getting some unresolved symbols. Already that money supply at block height ? wow... Serious doubt if it makes any sense to still add this coin...
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
DeCrypterManiac
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:51:39 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Secp is not broken itself. The autoconf includes are. This is indeed a bug with the build scripts. It looks like we tested fresh builds from the private repo at bitbucket, but somehow the repository did not fully transfer correctly to github, where we did a fresh git init. We are making and testing a repo fix now. It really would have been better for someone to post the error message sooner. We can't test under every possible condition, and testing does not always find the bugs. It's obvious in hindsight that we should have done build testing from the public repo. We did many build tests from the private. So there was no (working) source available since launch and you could mine all the blocks yourself until you release the working version.. nice.. There has been pool for some time now it's up on superninjapool.tk now. There was something funky with validating the daemon address for pool payout. I imagine it has to do with stealth, but I think it's all set. Yes, but the source was broken on github...
|
|
|
|
chrisvl
Legendary
Offline
Activity: 1274
Merit: 1006
Trainman
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2016, 08:57:42 PM |
|
This thing is still failling to compile for me:
./configure: line 12320: SECP_64BIT_ASM_CHECK: command not found ./configure: line 12349: SECP_INT128_CHECK: command not found ./configure: line 12377: SECP_INT128_CHECK: command not found ./configure: line 12402: SECP_GMP_CHECK: command not found ./configure: line 12508: SECP_OPENSSL_CHECK: command not found ./configure: line 12526: AX_JNI_INCLUDE_DIR: command not found
Seems that secp is somehow broken, I downloaded with --recursive already and manually tried to compile secp first - no luck.
Did you manually compile the secp256k library that we included in the repository? Also, just for clarifications, can you provide autoconf and automake versions? I tried both, manually and just automatic through your makefile. autoconf --version autoconf (GNU Autoconf) 2.69 automake --version automake (GNU automake) 1.15 i have compile eclipsed So what were your steps to do so ? cd eclipse/src/secp256k1 replace the secp256k1 folder with bitcoin secp256k1 folder on makefile.unix remove the line 274 make -f makefile.unix I was thinking about replacing the secp with bitcoin's secp but the dev states it's a special version with some mods.. so it would make no sense if that's actually working ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ./eclipsed getinfo { "version" : "v1.0.0.0-g", "mode" : "full", "state" : "Full Node", "protocolversion" : 60017, "walletversion" : 10500, "balance" : 0.00000000, "eclipsebalance" : 0.00000000, "newmint" : 0.00000000, "stake" : 0.00000000, "reserve" : 0.00000000, "blocks" : 739, "timeoffset" : -2, "moneysupply" : 1275959.00550400, "connections" : 10, "datareceived" : "111.24 KB", "datasent" : "60.44 KB", "proxy" : "", "ip" : "iebbi7wttlv5rdfg.onion", "difficulty" : { "proof-of-work" : 16337219.17622585, "proof-of-stake" : 128405.33843578 }, "testnet" : false, "keypoolsize" : 101, "paytxfee" : 0.00020000, "mininput" : 0.00000000, "errors" : "" } Hmm interesting.. Than the secp is NOT special and just a normal version... Which version/revision of secp did you use, I just tried with the latest version from the secp github but it looks like it is too new, its getting some unresolved symbols. Already that money supply at block height ? wow... Serious doubt if it makes any sense to still add this coin... i have the bitcoin source on my pc and i copy the secp from bitcoin and paste it on eclipse
|
|
|
|
|