My 1 gpu now 11gpus 5rigs for Ethereum. 45 days of mining. Photos thoughts.

[vapourminer]

specs say 1 x16 and 1 x1 slot. dunno if thats total or free?

no psu specs either.. but only gave it a quick glance.

[1524431847]

1524431847

[eretron]

Hey phil, I am having interesting situation...

I have 6x Rx 480 Rig with h81 BTC PRo... All GPUs are at same distance from one to another, but 1 gpu is significantly hotter then others...

5 of them are @ ~65C with fans from 2500rpm to 3000rpm, but the one I am talking about is @ 70C with fans an >4000rpm.

Have you experienced something similar?

Win 8.1 64
Claymore miner mining only ETH
all GPUs are 1000mhz at 800mV undervolted, whole rig is drawing 900W mesured from the wall. with all GPUs hashing 24.5MH/s

thanks

[Amph]

it's normal, i can bet my ass that the gpu you are talking about is the one on the pci-e x 16, it share the circuit with the cpu that's why this gpu is more hot

[philipma1957]

Hey phil, I am having interesting situation...

I have 6x Rx 480 Rig with h81 BTC PRo... All GPUs are at same distance from one to another, but 1 gpu is significantly hotter then others...

5 of them are @ ~65C with fans from 2500rpm to 3000rpm, but the one I am talking about is @ 70C with fans an >4000rpm.

Have you experienced something similar?

Win 8.1 64
Claymore miner mining only ETH
all GPUs are 1000mhz at 800mV undervolted, whole rig is drawing 900W mesured from the wall. with all GPUs hashing 24.5MH/s

thanks

no  because I don't build riser rigs.

I build four card rigs  with this mobo

http://www.newegg.com/Product/Product.aspx?Item=N82E16813138421&cm_re=biostar-_-13-138-421-_-Product

my review on newegg
Philip A.

5 out of 5 eggs  This has been my best ETH coin mining board by far.

Pros: I mine coins more then anything else with my pc builds.
I use windows 7 pro
I have 7 diy pcs built
This board allows me to run 4 rx 480's 24/7 with really good results.
No risers just an open build using the diypc alpha-d86 black acrylic atx bench case.
the corsair ax 760 psu
a m2 ssd
2 x 8gb sticks of hypernx ram.
this build just runs and runs and runs. really happy with this setup.

Cons: I only have two of these I should have only used these and not any other mother boards.
If you use rx 480 cards you can run this without risers.

Other Thoughts: I posted photos of this build on another website since it truly is my best etc coin rig. doing about 100mh at 600 watts. I can not be any happier about then I am . It is merely a question of how long does it hold up. If it give me a year or more it will have been one of my better purchases in mobos.




It is an open air build


I also have 5 two card builds

Two open air

three in cases.

I am now at 14 gpus.  well 13 the 14th is a rx 470 ordered today thanks to generalt sending me a pm to buy it.

I am power and heat capped for the summer and early fall

about 2700 watts and about  370mh  once I add the last card

When weather gets cold I may add a second four card build with the spare z170 board I have.

My new build below has blue highlighting it is 1 xfx rx 480  stock setting except for power -19 on wattman

It will get the rx 470 on tues

[asdalani]

I saw you ordered the 470. I would be very interested to see if it is better value than the 480 RX.

[citronick]

Amazon doesnt seem to carry the BIOSTAR Racing mobo.... and in NewEgg... it now costs 164$!

[philipma1957]

Amazon doesnt seem to carry the BIOSTAR Racing mobo.... and in NewEgg... it now costs 164$!

yep  those that did not buy it for 109.99 got ffff'd









ETH

test address below  fell free to toss a tiny bit into it.


0x7d70B20bC92faE3d7dA0dC2d084C8e3DC798e73C

[citronick]

Amazon doesnt seem to carry the BIOSTAR Racing mobo.... and in NewEgg... it now costs 164$!

yep  those that did not buy it for 109.99 got ffff'd


test address below  fell free to toss a tiny bit into it.


0x7d70B20bC92faE3d7dA0dC2d084C8e3DC798e73C

Is that a ETC address...

I rode the ETC/ETH madness at Poloniex this week and made 2 BTC with 400$ capital.

Too bad the roller coaster has kind of died... too bad ETC could not overpower ETH.

Well, hell.... we are in this for the profits be it ETC, ETH or ABC.

I am having nightmares with the USB risers, if I am lucky no issues, but if some GPU is acting up, it can take hours to figure out that the USB cable is faulty... I think your method of 4 x PCI per mobo is very wise.

Is there another mobo like Biostar Racing ... that has 4 x PCIs -- it doesnt have to be Z170

[Akarabzie]

Is that a ETC address...

I rode the ETC/ETH madness at Poloniex this week and made 2 BTC with 400$ capital.

Too bad the roller coaster has kind of died... too bad ETC could not overpower ETH.

Well, hell.... we are in this for the profits be it ETC, ETH or ABC.

I am having nightmares with the USB risers, if I am lucky no issues, but if some GPU is acting up, it can take hours to figure out that the USB cable is faulty... I think your method of 4 x PCI per mobo is very wise.

Is there another mobo like Biostar Racing ... that has 4 x PCIs -- it doesnt have to be Z170

This is the reason I have totally removed all usb risers from my rigs, i've had a 50% failure rate on them for the last 2 builds (4 slots worked 4 did not). I switched to unpowered risers and all work 100% now.

[philipma1957]

Amazon doesnt seem to carry the BIOSTAR Racing mobo.... and in NewEgg... it now costs 164$!

yep  those that did not buy it for 109.99 got ffff'd


test address below  fell free to toss a tiny bit into it.

ETH


0x7d70B20bC92faE3d7dA0dC2d084C8e3DC798e73C

ETH ADDRESS!


Is that a ETC address...

I rode the ETC/ETH madness at Poloniex this week and made 2 BTC with 400$ capital.

Too bad the roller coaster has kind of died... too bad ETC could not overpower ETH.

Well, hell.... we are in this for the profits be it ETC, ETH or ABC.

I am having nightmares with the USB risers, if I am lucky no issues, but if some GPU is acting up, it can take hours to figure out that the USB cable is faulty... I think your method of 4 x PCI per mobo is very wise.

Is there another mobo like Biostar Racing ... that has 4 x PCIs -- it doesnt have to be Z170

YES   I will find link.

this works but is not so cheap

http://www.newegg.com/Product/Product.aspx?Item=N82E16813157649&ignorebbr=1


I had an older model and did 4 hd7970's  for 15 months non stop

Le me look more

[Amph]

Is that a ETC address...

I rode the ETC/ETH madness at Poloniex this week and made 2 BTC with 400$ capital.

Too bad the roller coaster has kind of died... too bad ETC could not overpower ETH.

Well, hell.... we are in this for the profits be it ETC, ETH or ABC.

I am having nightmares with the USB risers, if I am lucky no issues, but if some GPU is acting up, it can take hours to figure out that the USB cable is faulty... I think your method of 4 x PCI per mobo is very wise.

Is there another mobo like Biostar Racing ... that has 4 x PCIs -- it doesnt have to be Z170

This is the reason I have totally removed all usb risers from my rigs, i've had a 50% failure rate on them for the last 2 builds (4 slots worked 4 did not). I switched to unpowered risers and all work 100% now.

same, i've always used ribbon risers, never had any issue, dunno why people hate them so much, probably they just had faulty one

i also dreamed about a good setup without riser but for six card, to bad it's not possible, there are no motherboard with more than 6 pcie that do not cost a fortune

[philipma1957]

Amazon doesnt seem to carry the BIOSTAR Racing mobo.... and in NewEgg... it now costs 164$!

yep  those that did not buy it for 109.99 got ffff'd









ETH

test address below  fell free to toss a tiny bit into it.


0x7d70B20bC92faE3d7dA0dC2d084C8e3DC798e73C
this has issues.

feel free to send .01 eth or less  to it

............................................................................

0x265DE11CD9Af236884BebE2CaC4D3C2fC3C3cC11  

Eth tester this one is good
............................................................................... .

0x04525C1A9bBCC5110711543f27280E0d5890180b

one more eth tester issues ? feel free to send .01 eth to it or less

[Sanguintan]

Is that a ETC address...

I rode the ETC/ETH madness at Poloniex this week and made 2 BTC with 400$ capital.

Too bad the roller coaster has kind of died... too bad ETC could not overpower ETH.

Well, hell.... we are in this for the profits be it ETC, ETH or ABC.

I am having nightmares with the USB risers, if I am lucky no issues, but if some GPU is acting up, it can take hours to figure out that the USB cable is faulty... I think your method of 4 x PCI per mobo is very wise.

Is there another mobo like Biostar Racing ... that has 4 x PCIs -- it doesnt have to be Z170

This is the reason I have totally removed all usb risers from my rigs, i've had a 50% failure rate on them for the last 2 builds (4 slots worked 4 did not). I switched to unpowered risers and all work 100% now.

same, i've always used ribbon risers, never had any issue, dunno what people hate them so much, probably they just had faulty one

i also dreamed about a good setup without riser but for six card, to bad it's not possible, there are no motherboard with more than 6 pcie that do not cost a fortune

I use powered ribbon cable. I will use 3 powered and 3 non powered ribbon risers in a 6 GPU setup.

[philipma1957]

Is that a ETC address...

I rode the ETC/ETH madness at Poloniex this week and made 2 BTC with 400$ capital.

Too bad the roller coaster has kind of died... too bad ETC could not overpower ETH.

Well, hell.... we are in this for the profits be it ETC, ETH or ABC.

I am having nightmares with the USB risers, if I am lucky no issues, but if some GPU is acting up, it can take hours to figure out that the USB cable is faulty... I think your method of 4 x PCI per mobo is very wise.

Is there another mobo like Biostar Racing ... that has 4 x PCIs -- it doesnt have to be Z170

This is the reason I have totally removed all usb risers from my rigs, i've had a 50% failure rate on them for the last 2 builds (4 slots worked 4 did not). I switched to unpowered risers and all work 100% now.

same, i've always used ribbon risers, never had any issue, dunno what people hate them so much, probably they just had faulty one

i also dreamed about a good setup without riser but for six card, to bad it's not possible, there are no motherboard with more than 6 pcie that do not cost a fortune

I use powered ribbon cable. I will use 3 powered and 3 non powered ribbon risers in a 6 GPU setup.

power risers may or may not work well.  I had so many issues with them in 2012 with btc I said fuck them never again.

[klondike_bar_recovery]

power risers may or may not work well.  I had so many issues with them in 2012 with btc I said fuck them never again.

probably depends on the card. the rx 480 needs them, but it seems like the GTX1070 may draw its full needs from the 8pin pcie cable

[arielbit]

i used a usb pcie riser.. mining non-stop for 2-3 years..

the only problem i encountered for that period of time is 2 usb cable got a problem and 1 riser (molex connection) got burned (only because the molex power might be loose)

i think "quality" is the key..from where i live, usb-pcie riser is a must. the spacing between the cards and creative arrangement solves temperature issues. (also helps packing more cards for a limited space)

[hawkfish007]

Amazon doesnt seem to carry the BIOSTAR Racing mobo.... and in NewEgg... it now costs 164$!

Price went down to $129.99. I didn't see any additional power connector other than 8 pin CPU and 24 pin ATX, wonder if it will be able to supply power to 4 GPUs installed on 16x slots for a long time.

[citronick]

Phil - what CPU is suitable for pure Claymore ETH mining on this BIOSTAR Z170 Racing mobo? Thanks

Hey phil, I am having interesting situation...

I have 6x Rx 480 Rig with h81 BTC PRo... All GPUs are at same distance from one to another, but 1 gpu is significantly hotter then others...

5 of them are @ ~65C with fans from 2500rpm to 3000rpm, but the one I am talking about is @ 70C with fans an >4000rpm.

Have you experienced something similar?

Win 8.1 64
Claymore miner mining only ETH
all GPUs are 1000mhz at 800mV undervolted, whole rig is drawing 900W mesured from the wall. with all GPUs hashing 24.5MH/s

thanks

no  because I don't build riser rigs.

I build four card rigs  with this mobo

http://www.newegg.com/Product/Product.aspx?Item=N82E16813138421&cm_re=biostar-_-13-138-421-_-Product

my review on newegg
Philip A.

5 out of 5 eggs  This has been my best ETH coin mining board by far.

Pros: I mine coins more then anything else with my pc builds.
I use windows 7 pro
I have 7 diy pcs built
This board allows me to run 4 rx 480's 24/7 with really good results.
No risers just an open build using the diypc alpha-d86 black acrylic atx bench case.
the corsair ax 760 psu
a m2 ssd
2 x 8gb sticks of hypernx ram.
this build just runs and runs and runs. really happy with this setup.

Cons: I only have two of these I should have only used these and not any other mother boards.
If you use rx 480 cards you can run this without risers.

Other Thoughts: I posted photos of this build on another website since it truly is my best etc coin rig. doing about 100mh at 600 watts. I can not be any happier about then I am . It is merely a question of how long does it hold up. If it give me a year or more it will have been one of my better purchases in mobos.




It is an open air build


I also have 5 two card builds

Two open air

three in cases.

I am now at 14 gpus.  well 13 the 14th is a rx 470 ordered today thanks to generalt sending me a pm to buy it.

I am power and heat capped for the summer and early fall

about 2700 watts and about  370mh  once I add the last card

When weather gets cold I may add a second four card build with the spare z170 board I have.

My new build below has blue highlighting it is 1 xfx rx 480  stock setting except for power -19 on wattman

It will get the rx 470 on tues

[LoneRangir]

Phil - what CPU is suitable for pure Claymore ETH mining on this BIOSTAR Z170 Racing mobo? Thanks

The most cost effective, "bang for the buck" is this Pentium G4400, in my opinion:
http://www.newegg.com/Product/Product.aspx?Item=9SIA1UH3Z96302

[philipma1957]

Phil - what CPU is suitable for pure Claymore ETH mining on this BIOSTAR Z170 Racing mobo? Thanks

The most cost effective, "bang for the buck" is this Pentium G4400, in my opinion:
http://www.newegg.com/Product/Product.aspx?Item=9SIA1UH3Z96302

my current   biostar z170 has an i3  6100

    but I am building a second  z170  with  that same said  pentium g4400

in fact I will take a photo or two of this build  on Wednesday

I am going to use  rx 470s with the build