Dagger-Hashimoto Mining + Tweaks + Mining software + More MUST SEE

[clintar2]

Every known stratum version is now supported directly at eth.cncoin.farm. No need for proxy if your miner supports it. Pool fee will go to 1% after we hit the next block and it pays out. We now have North America and Europe servers, too.

Don't see anything wrong. I've been testing everything and mining testnet blocks all day. I see nothing wrong with the pool, but no block. I'm going to revert the updated stratum code and count this as a huge failure. Sorry to waste everyone's mining!

[crazyearner]

More support added in few more pools added to test list and configs changed a little. Welcome to the list MinerGate admin has been invited over to give some guidance on setting up and will get to add to main post once information is filtered though and updated.

[cryptoc19]

geteth.io had the second "lost" block in the last 24 hours. they are most probably running a (still) older version of the node, since (afaik) this bug was fixed in the latest versions.

[crazyearner]

Every known stratum version is now supported directly at eth.cncoin.farm. No need for proxy if your miner supports it. Pool fee will go to 1% after we hit the next block and it pays out. We now have North America and Europe servers, too.

How can I set the share diff on stratum port?
4'000'000'000 is way too high for my miner ...

Their is no way to set share diff on pool most pools support variable share difficulty based on your hashing power. I wouldn't worry too much on it. But if concern to you maybe to try another pool to mine on. Fair few to chose from in list

[restless]

I am trying to connect to 1. - PooLTo.Be ΞthereumPool with Athrides proxy... but no success
can you share how to connect!?

[crazyearner]

I am trying to connect to 1. - PooLTo.Be ΞthereumPool with Athrides proxy... but no success
can you share how to connect!?

using proxy use this conf file make sure you edit your wallet address etc I will put Add_Own_info on parts to put in if you need to change your address to reflect local ip where 192.168.0.4 is change to your own to get this open cmd and type in ipconfig and note down your ipv4 address and change to yours and also where dablocks is in config add own names for rigs etc/

Code:

###
# Examples of command line for miners:
#
#   ethminer.exe --farm-recheck 200 -G -F http://HOST:PORT/DaBlocks
#   ethminer.exe --farm-recheck 500 -G -F http://HOST:PORT/DaBlocks
#
#   ethminer.exe -G -F http://127.0.0.1:8080/
#   ethminer.exe --farm-recheck 200 -G -F http://192.168.0.4:8080/DaBlocks
#
#  farm-recheck parameter is very individual. Just test different values.
#
#  You can submit shares without workername or
#  You can provide workername:
#   - with url like "/rig1"
#   - or use automatically numbering(integer) based on IP of miner
#
#  Servers:
#    EU-Server:  eth.poolto.be  (Europe)
###

# Select Ethereum ETH or Expanse EXP
COIN = "ETH"

# Host and port for your workers
HOST = "0.0.0.0"
PORT = 8080

# Coin address where money goes
WALLET = "add_Own_info"

# To donate please use wallet "0xea7263feb7d8a8ab0a11eedd8f1ce04412ab0820"

# It's useful for individually monitoring and statistic
ENABLE_WORKER_ID = True

# On DwarfPool you have option to monitor your workers via email.
# If WORKER_ID is enabled, you can monitor every worker/rig separately.
MONITORING = False
MONITORING_EMAIL = "mail@example.com"

# Main pool
POOL_HOST = "eth.poolto.be"
POOL_PORT = 8547

# Failover pool
POOL_FAILOVER_ENABLE = True

POOL_HOST_FAILOVER1 = "us-east1.ethereum.miningpoolhub.com"
POOL_PORT_FAILOVER1 = 20536

POOL_HOST_FAILOVER2 = "asia1.ethereum.miningpoolhub.com"
POOL_PORT_FAILOVER2 = 20536

# Logging
LOG_TO_FILE = True

# Enable debug
DEBUG = False

So copy everything in the code add your info save restart proxy then in your mining  bat file just have the following.

ethminer -F http://127.0.0.1:8080/nameofminer -G --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384

Save in bat file where ethminer is and then double click bat file to start should work fine as this is exct one using for mining on it with proxy Hope resolves problem for you.

[Q_R_V]

[...]I am still playing around with claymore miner due to the fact it is already heavily modded already and can also choice how hard want to get gpu working. Should have some results later this evening. As am trying to use all miners out their for AMD cards and then put together for all miners. [...]

Quite nice topic you got here. Is work on modded miner progressing well? Squeezing some more hashpower from CDM would be something really impressive. I can't wait to hear about results and see video of miner working.

[crazyearner]

[...]I am still playing around with claymore miner due to the fact it is already heavily modded already and can also choice how hard want to get gpu working. Should have some results later this evening. As am trying to use all miners out their for AMD cards and then put together for all miners. [...]

Quite nice topic you got here. Is work on modded miner progressing well? Squeezing some more hashpower from CDM would be something really impressive. I can't wait to hear about results and see video of miner working.

Already posted small video a few posts back pushed cards from average 20 to 22MH to 24+ MH With current updated miner tho seems without  DAG creation seems slow gpu down so reverted to old version that creates DAG files until more solid and not beta.

[Junamalik]

bookmark it
for future reference
Tanks

[cryptoprime]

bookmark it
for future reference
Tanks

+1 great work on this comprehensive guide 

[QuintLeo]

Some 280x have 3GB of ram (there might be 4GB cards out there too, but I don't have any of THOSE) - those will benefit eventually from changing that 64 bit pointer to =1 instead of =0, when the DAG file gets too big to fit in 2GB.

[parmatiya]

The DAG grows 600 MB every year, it will take about 3 years to fill the 3GB video memory. So 280X is safe.

[ethermine.rocks]

Hi! Nice pool list!

Can you add our pool to it as well?

http://ethermine.rocks/#/help

Stratum mining is supported
Daily payouts run from 0.5 Ether every 2 hours.
Pool fee 0% for now (will be lower than any other pool later)
No registration needed.
Detailed per worker stats.
Pool always pay tx fees from it's own pocket.
We payout all miner rewards.
Quick start guide for quick start for AMD and NVIDIA.

And yours truly awsome support always here to help out and give a hand! :-)

Tnx!

[s1gs3gv]

Which of the various miners (claymore, ethminer, etc) provides highest hash rates with AMD cards, everything else being equal ?

[parmatiya]

Which of the various miners (claymore, ethminer, etc) provides highest hash rates with AMD cards, everything else being equal ?

For the 390 and 280x, claymore miners is about 2-5% better than the ethminer, but it charges 1% fee.

[ekrem]

Hi! Nice pool list!

Can you add our pool to it as well?

http://ethermine.rocks/#/help

Stratum mining is supported
Daily payouts run from 0.5 Ether every 2 hours.
Pool fee 0% for now (will be lower than any other pool later)
No registration needed.
Detailed per worker stats.
Pool always pay tx fees from it's own pocket.
We payout all miner rewards.
Quick start guide for quick start for AMD and NVIDIA.

And yours truly awsome support always here to help out and give a hand! :-)

Tnx!

Code:

Min. payout threshold: 0.5 Ether,

this bad pls change to 0.20ETH

[crazyearner]

New pool running smooth. alpereum Will be added into the Opening post shortly. Pool details listed below.

Stratum Mining Proxy
Zero Fees the First Several Weeks! 1% Fee Afterwards
Payout every 30 minutes (0.2 ETH Minimum)
Uncle rewards and incentives are paid out
No registration required
24/7/365 support in multiple languages (English, French, German, Danish, and Norwegian)
Mine to your wallet or an exchange
Zero transaction fees
DDoS Mitigation

https://www.alpereum.ch/

Other pool benefits I asked admin on. and response

(1) block finding reward.
No, and this includes uncles as well.

(2) transaction fee (gas spent)
Not sure if you are asking if we cover transaction fees on payout or if we payout the transaction fees (gas) associated with a block. So I will answer both.

Yes, we cover all transaction fees for our miners.

Yes, we also pay out the transaction fee (gas spent) reward that is associated with a block or uncle.

(3) uncle reward (4.375 ETH, 3.75 ETH, 3.125 ETH, 2.5 ETH, 1.875 ETH, 1.25 ETH)
Yes, we payout all uncles.

(4) uncle inclusion incentive (0.3125 ETH, 0.15625

Review of pools so far. Pools is solid shares seem to be higher in submission and payments I am working out currently. No doubt pool will go into my fav list after 1 weeks testing or so done.

[crazyearner]

Well after taking some time on the latest pools seems that PooLTo.Be ΞthereumPool is leading the way forward on payments and Ethereum generated over 24 hours and throughout the week. Even tho their is a lot of competition seems PooLTo.Be ΞthereumPool is leading the way forward compared to 15+ pools out their.

[crazyearner]

Details of new website for everyone will soon be here for mining support and crypto coin talk too. Everyone is welcome. Had the site for a number of years just never had time to get things moving with it and going to wipe and restart and hopefully keep it maintained. Would like some people off here join or even review. Site will be like bitcointalk but much more features and even troll box

[Dev_Sempak_coin]

i see your video at youtube, it's really you get 26mhs for each R9 280x? how about your cooling system ?
how about your config? OC ?