bitcoin-qt: Move Downloaded blockchain to another installation

[doghouse]

This is a newbie question...

I've installed bitcoin-qt and Armoury on on a PC. After ages, (more than 8 hours) the blockchain is still downloading. (Last received block generated 175 days ago).
Instead of going through the same rigmarole again on another PC, can I install bitcoin-qt, and move the files from C:\Users\USERNAME\AppData\Roaming\Bitcoin to the new installation?

Which files do I need?
Are blk0001.dat, blk0002.dat and blkindex.dat enough? (I don't need to move my wallet.dat)

Can they just be "dropped into place", or is there a command line option I need to use to make it recognised?

Many Thanks!

[Akka]

Yes, that are the files you need, just copying the should be sufficient. But as you are not finished yet anyway, I would suggest, that you upgrade to v0.8 instead.

This Version uses ultraprune and reduces the download time for the blockchain to a few hours.

The final version is not out yet, but you can download the release candidate here: https://bitcointalk.org/index.php?topic=142151.0

[doghouse]

Hi Akka,
Thanks for your help!
I'm using v0.7.2-beta... when did v0.8 come out?

Can I still transpant the files over to 0.8?

Kind Regards.

[Akka]

I'm using v0.7.2-beta... when did v0.8 come out?

3 days ago, so it's brand new.

Can I still transpant the files over to 0.8?

Kind Regards.

Yes and no, 0.8 needs to convert the files to the new format. If you are not finished downloading anyway, I would let it start new.

[Pieter Wuille]

v0.8.0 is not released yet, there's only a release candidate.

[zvs]

Hi Akka,
Thanks for your help!
I'm using v0.7.2-beta... when did v0.8 come out?

Can I still transpant the files over to 0.8?

Kind Regards.

i have a 7z of 0.8 reorganization @ http://www.nogleg.com/archive/v0.8.0-Feb-11th/v0.8.0-Feb-11th.7z   goes up to block 220800 or so..  it isn't "pruned", so it's just as big as before, but in a diff format

and then you'd delete everything but bitcoin.conf & wallet.dat, then use that for 0.8 rc

aha

[BookLover]

This is a newbie question...

I've installed bitcoin-qt and Armoury on on a PC. After ages, (more than 8 hours) the blockchain is still downloading. (Last received block generated 175 days ago).
Instead of going through the same rigmarole again on another PC, can I install bitcoin-qt, and move the files from C:\Users\USERNAME\AppData\Roaming\Bitcoin to the new installation?

Which files do I need?
Are blk0001.dat, blk0002.dat and blkindex.dat enough? (I don't need to move my wallet.dat)

Can they just be "dropped into place", or is there a command line option I need to use to make it recognised?

Many Thanks!

Yes, blk0001.dat, blk0002.dat and blkindex.dat are enough. (Unless there is a new blk0003.dat then you need it to.)
Before moving any files start both the bitcoin-qt clients, go to options, and check the box which says detach database at shutdown.  Then close both clients. (Make sure they are closed in taskmanager.) then you are free to move the block chain files.

P.S. You can start the bitcoin clients with the command option -detachdb to accomplish the same thing as checking the box.
P.S. After the files are successfully imported you may want to deselect the detach database at shutdown to speed up the shut down of the bitcoin-qt clients.

[zvs]

This is a newbie question...

I've installed bitcoin-qt and Armoury on on a PC. After ages, (more than 8 hours) the blockchain is still downloading. (Last received block generated 175 days ago).
Instead of going through the same rigmarole again on another PC, can I install bitcoin-qt, and move the files from C:\Users\USERNAME\AppData\Roaming\Bitcoin to the new installation?

Which files do I need?
Are blk0001.dat, blk0002.dat and blkindex.dat enough? (I don't need to move my wallet.dat)

Can they just be "dropped into place", or is there a command line option I need to use to make it recognised?

Many Thanks!

Yes, blk0001.dat, blk0002.dat and blkindex.dat are enough. (Unless there is a new blk0003.dat then you need it to.)
Before moving any files start both the bitcoin-qt clients, go to options, and check the box which says detach database at shutdown.  Then close both clients. (Make sure they are closed in taskmanager.) then you are free to move the block chain files.

P.S. You can start the bitcoin clients with the command option -detachdb to accomplish the same thing as checking the box.
P.S. After the files are successfully imported you may want to deselect the detach database at shutdown to speed up the shut down of the bitcoin-qt clients.

for?  reindexing?  unless you have 8GB RAM for a ramdrive or less than 10Mbps downstream, it'd be quicker to DL

[doghouse]

Thanks everyone for your help!
In the end, I installed v0.8 and then re-downloaded the Blockchain from scratch using the -dbcache=2000 parameter. This was much quicker than on the previous version of bitcoin-qt. Unfortunately, it and Armory takes up a lot of RAM though!

[BookLover]

This is a newbie question...

I've installed bitcoin-qt and Armoury on on a PC. After ages, (more than 8 hours) the blockchain is still downloading. (Last received block generated 175 days ago).
Instead of going through the same rigmarole again on another PC, can I install bitcoin-qt, and move the files from C:\Users\USERNAME\AppData\Roaming\Bitcoin to the new installation?

Which files do I need?
Are blk0001.dat, blk0002.dat and blkindex.dat enough? (I don't need to move my wallet.dat)

Can they just be "dropped into place", or is there a command line option I need to use to make it recognised?

Many Thanks!

Yes, blk0001.dat, blk0002.dat and blkindex.dat are enough. (Unless there is a new blk0003.dat then you need it to.)
Before moving any files start both the bitcoin-qt clients, go to options, and check the box which says detach database at shutdown.  Then close both clients. (Make sure they are closed in taskmanager.) then you are free to move the block chain files.

P.S. You can start the bitcoin clients with the command option -detachdb to accomplish the same thing as checking the box.
P.S. After the files are successfully imported you may want to deselect the detach database at shutdown to speed up the shut down of the bitcoin-qt clients.

for?  reindexing?  unless you have 8GB RAM for a ramdrive or less than 10Mbps downstream, it'd be quicker to DL

No, when you check detach database at shutdown it allows the bitcoin-qt client to accept the new blockchain without errors.  It does NOT have to index the blockchain, it simply loads the blockchain files on startup like it would its own.  This is infinity faster than updating the blockchain from DL.

P.S. I may not have been clear in may previous post.  When you move the blockchain files, you move them to the bitcoin directory and REPLACE the other blockchain files.  You do NOT run the client so that is updates its blockchain files from the new ones.

[Mousepotato]

I moved my bitcoin-qt.exe to my external drive E:\ and just dumped the blockchain files into that same directory on E:\ as well.  However, whenever I run bitcoin-qt.exe -detachdb, it keeps re-creating C:\Mousepotato\Appdata\Roaming\Bitcoin and starts downloading the blockchain again.  What am I doing wrong?

[BookLover]

You need to run bitcoin with the command "-datadir E:\" change the path to wherever you want your bitcoin directory to be.

[Mousepotato]

You need to run bitcoin with the command "-datadir E:\" change the path to wherever you want your bitcoin directory to be.

Thank you!

[niko]

I moved my bitcoin-qt.exe to my external drive E:\ and just dumped the blockchain files into that same directory on E:\ as well.  However, whenever I run bitcoin-qt.exe -detachdb, it keeps re-creating C:\Mousepotato\Appdata\Roaming\Bitcoin and starts downloading the blockchain again.  What am I doing wrong?

You should have detached the databases before moving the files. Once you have them moved, the option is no longer needed.

[tinyapps]

Which files do I need? Are blk0001.dat, blk0002.dat and blkindex.dat enough?

It seems that in 0.8.1 those have been superceded by two new directories: blocks and chainstate. There is a third directory named "database", but I dimly recall that being present in previous versions as well.

As of 3/23/13, those three directories contain about 7.76GB of data, with blocks making up 7.57GB of that total.

Is copying the blockchain to a new machine as simple as pasting one or more of these directories? Is there any reason to keep blk0001.dat, blk0002.dat and blkindex.dat?

[batcoin]

Which files do I need? Are blk0001.dat, blk0002.dat and blkindex.dat enough?

It seems that in 0.8.1 those have been superceded by two new directories: blocks and chainstate. There is a third directory named "database", but I dimly recall that being present in previous versions as well.

As of 3/23/13, those three directories contain about 7.76GB of data, with blocks making up 7.57GB of that total.

Is copying the blockchain to a new machine as simple as pasting one or more of these directories? Is there any reason to keep blk0001.dat, blk0002.dat and blkindex.dat?

I would also be interested in the steps needed for moving the blockchain around in 0.8.1. Any helpers out there?

[Fressac]

On my side (WinXP), data directory is on D: drive, folder BitcoinData, so "Target" field for shortcut is:

"C:\Program Files\Bitcoin\bitcoin-qt.exe" -datadir=D:\BitcoinData

Does anyone have any idea how to change the default data directory on a Mac? I'm not aware of a "Target" parameter when launching apps in OS X. I've tried googling it but come up with nothing.

[tinyapps]

Does anyone have any idea how to change the default data directory on a Mac?

Just put the files in the default location:

~/Library/Application Support/Bitcoin

The tilde (~) represents the root directory of your home folder. The full path would look something like:

/Users/username/Library/Application Support/Bitcoin

If you wanted to change the default location, one way would be to use a symlink. I had to do this for the iMovie data directory years ago:

http://tinyapps.org/blog/mac/200805230700_change_imovie_save_directory.html

[Fressac]

If you wanted to change the default location, one way would be to use a symlink. I had to do this for the iMovie data directory years ago:

http://tinyapps.org/blog/mac/200805230700_change_imovie_save_directory.html

Of course! Thanks.

[tinyapps]

Unable to find a definitive answer to the question of copying the blockchain to another computer, I asked Gavin via email:

In Bitcoin-Qt 0.8+, how can the blockchain be copied from one computer to another? Is it simply a matter of copying the blocks and chainstate directories?

His reply:

Yes