Bitcoin Forum
April 25, 2024, 05:05:09 PM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1] 2 »  All
  Print  
Author Topic: New 6970 Overheating?  (Read 5786 times)
Claudeski (OP)
Newbie
*
Offline Offline

Activity: 8
Merit: 0


View Profile
June 10, 2011, 12:09:56 PM
 #1

Hi, I'm new to the forum and to Bitcoin mining. I had a 9800GT but since finding out about ATI cards pretty much being mandatory I got a new 6970 (needed an upgrade anyway). I didn't notice any increased fan noise when trying it out on my 9800GT but when using automatic fan controls on the 6970 it gets really loud. It also seems to be getting too hot, around about 90 degrees when using auto fan. With manual fan control set pretty high the temperature seems okay but the noise is unbearable. I'm using the default guiminer. I'm also using dual monitors which I've heard adds several degrees.

Is the card meant to be running that hot/loud? Thanks.
In order to achieve higher forum ranks, you need both activity points and merit points.
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
1714064709
Hero Member
*
Offline Offline

Posts: 1714064709

View Profile Personal Message (Offline)

Ignore
1714064709
Reply with quote  #2

1714064709
Report to moderator
1714064709
Hero Member
*
Offline Offline

Posts: 1714064709

View Profile Personal Message (Offline)

Ignore
1714064709
Reply with quote  #2

1714064709
Report to moderator
1714064709
Hero Member
*
Offline Offline

Posts: 1714064709

View Profile Personal Message (Offline)

Ignore
1714064709
Reply with quote  #2

1714064709
Report to moderator
carbonc
Member
**
Offline Offline

Activity: 126
Merit: 60


View Profile
June 10, 2011, 12:15:45 PM
 #2

Yes.
I find that you need to decrease the memory speed to help reduce the wattage.

You need to find a stable point.
Plus.  I removed my case enclosure and pointed a standard house fan at it to further reduce the temperature.

Running my 6970 at 400 MH/s
64 degrees Cel.
Claudeski (OP)
Newbie
*
Offline Offline

Activity: 8
Merit: 0


View Profile
June 10, 2011, 12:36:17 PM
Last edit: June 10, 2011, 01:00:40 PM by Claudeski
 #3

Yes.
I find that you need to decrease the memory speed to help reduce the wattage.

You need to find a stable point.
Plus.  I removed my case enclosure and pointed a standard house fan at it to further reduce the temperature.

Running my 6970 at 400 MH/s
64 degrees Cel.

Thanks. What program should I use to reduce memory speed? Will I need to put the memory speed back to normal when playing games or anything GPU related?

I haven't seen anyone mention using a house fan to get normal temperatures :S. I'll give it a try if I can find a spare one.

Edit: Tried taking off side panel and putting fan next to it and it's running at 85 degrees with 50% fan speed, good improvement!
kelv0n
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
June 10, 2011, 01:01:33 PM
 #4

I use msi afterburner.  Pretty much controls everything you need.  How'd the fan trick work out?
SmokeAndMirrors
Full Member
***
Offline Offline

Activity: 168
Merit: 100


View Profile
June 14, 2011, 02:11:41 AM
 #5

I just bought a 6970 today and am very impressed with it so far. Mine runs at 70C with the auto-fan at 39%. Not too bad but I will most likely get a strong little fan to just lay next to it for that added comfort(for me).

This is easily one of the loudest cards/fans I've ever heard, but seeing as how I'm using it for mining, I think it's fine. Makes it sound like it's really working its ass off to make me some cash Smiley.

Help Bitcoins by buying clothes, technology, books, etc. through people/stores that accept BTC. This will increase overall value of BTC as well as mitigate unnecessary bank transaction fees.

My address -
1EM9HGg1SEa5Bux1rVEPxGqGSfNTTc9EkC
dayfall
Sr. Member
****
Offline Offline

Activity: 312
Merit: 250



View Profile
June 14, 2011, 02:47:47 AM
 #6

I recently bought some gigabyte 6970's.  They are quiet at 100% fan speed but they run at 90C.  I tried to put 3 on one board but the lack space between the cards drove the temp up to 106C.  Obviously, I stopped doing that.  I even added little heat sinks to the top side mosfets.  Boy, do they ever get hot!  (I get 380Mh/s, btw)  I don't remember how low I could bring down the memory but I doubt that would add that much heat.  Also, the top card gets significantly hotter than the lower one.  The mosfets on the upper card were blazing hot but those on the lower card were just slightly hot.  Is this normal?

I would really like to run all 3 cards in one box, but even setting -f600 doesn't help the heat much.  It certainly slows down the Mhashes though.

Even a box fan hardly helps. 
mlouca
Newbie
*
Offline Offline

Activity: 28
Merit: 0


View Profile
June 14, 2011, 03:41:45 AM
 #7

were you guys able to overclock the 6970s? i have 3 of them and i want to try to bump them up a little more. any suggestions or personal experience miners?
dayfall
Sr. Member
****
Offline Offline

Activity: 312
Merit: 250



View Profile
June 14, 2011, 05:04:01 AM
 #8

I run my cooler ones at 950.  I haven't adjusted voltage, however.
Basiley
Newbie
*
Offline Offline

Activity: 42
Merit: 0


View Profile
June 14, 2011, 01:54:19 PM
Last edit: June 15, 2011, 11:41:59 AM by Basiley
 #9

6970 is almost 300W of heat inside you PC case[unless you stick with reference cooler, which expunge majority of it outside], even w/o overclocking.
mind improving airflow.
thats forced me to switch cases in most setups to Zalman Z9+ and CM HAF912 and IW BF.
ninjapug
Newbie
*
Offline Offline

Activity: 40
Merit: 0


View Profile
June 14, 2011, 04:38:22 PM
 #10

how do u reduce memory below 1375 with Sapphire 6970
Xer
Member
**
Offline Offline

Activity: 99
Merit: 10


View Profile
June 14, 2011, 05:40:33 PM
Last edit: June 14, 2011, 05:56:15 PM by Xer
 #11

Jumping in on the discussion as i have ref 6950's unlocked (thats is a 6970 with slightly lower quality memory chips).
For overclocking have a look at MSI Afterburner or Sapphire Trixx.

Racerx will allow you to change the ccc overclocking ranges through regedits.
dl link
http://www.techimo.com/forum/attachments/graphics-cards-displays/24091d1303761477-enable-higher-overclocks-ccc-reg-entry-racerx.zip.
thread http://www.techimo.com/forum/graphics-cards-displays/256789-enable-higher-overclocks-ccc-reg-entry.html
Edit. DO NOT EVEN THINK ABOUT USING THIS WITH 5XXX AND LOWER CARDS IT WILL MESS UP YOUR VIDEO DRIVER AND LIKLEY FORCE YOU TO UNINSTALL IN SAFE MODE.


My 6950s are chugging along fine at 1 Ghz Core / 1200mhz ram 1.205 vcore. They are however watercooled.


Just make sure to increase the power limit in ccc when playing around with the 69xx cards, or they will throtle themselves down as they hit the power draw limit built into the driver.
PhoenixUK
Newbie
*
Offline Offline

Activity: 13
Merit: 0


View Profile
June 14, 2011, 07:55:18 PM
 #12

Guys, remember to put a high speed fan on the back of your case where the GPUs are facing so it DRAWS THE HOT AIR __OUT__ of the GPUs, that should drop you good 5-10c at least.
Freakin
Full Member
***
Offline Offline

Activity: 154
Merit: 100


View Profile
June 14, 2011, 08:04:10 PM
 #13

Xfx 6970 runs at 75c at stock with fanspeed at 70%, which sounds like a jet taking off. If I leave fan set to "auto" it hits 90c and still doesn't push fan past 45%.

Can't get more than 360mh from it
BitMinerN8
Hero Member
*****
Offline Offline

Activity: 626
Merit: 500


Mining since May 2011.


View Profile
June 14, 2011, 10:18:16 PM
 #14

Xfx 6970 runs at 75c at stock with fanspeed at 70%, which sounds like a jet taking off. If I leave fan set to "auto" it hits 90c and still doesn't push fan past 45%.

Can't get more than 360mh from it

This is my same scenario, but with a HIS brand HD 6970. I guess I will have to get a external box fan and take the side panel off and see how that goes.
Vanquistador
Newbie
*
Offline Offline

Activity: 28
Merit: 0


View Profile
June 15, 2011, 06:07:26 AM
 #15

I'm running 2x MSI 6970s in one rig.  I have to run their fans at 100% in order to keep their temps around 80'C at night at 84'C during the day (apartment airconditioner struggling to keep the place at 72'F-75'F with all the PCs in this place)  I have their core clocks up as high as MSI afterburner would let me, and the memory as low as possible.

Is this normal?  I even placed this particular rig underneath one of the air conditioning vents and it has a 200mm+ fan directing the cold air directly on top of the graphic cards and I'm still barely managing to keep it below 80'C with 100% fans and a roughly 72'F room temp.
655321
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
June 15, 2011, 04:22:51 PM
 #16

I'm running 2x MSI 6970s in one rig.  I have to run their fans at 100% in order to keep their temps around 80'C at night at 84'C during the day (apartment airconditioner struggling to keep the place at 72'F-75'F with all the PCs in this place)  I have their core clocks up as high as MSI afterburner would let me, and the memory as low as possible.

Is this normal?  I even placed this particular rig underneath one of the air conditioning vents and it has a 200mm+ fan directing the cold air directly on top of the graphic cards and I'm still barely managing to keep it below 80'C with 100% fans and a roughly 72'F room temp.

Anything below 90C should be fine. You don't have to struggle to keep them at 80C. If you can keep them at 90C or below, that should suffice.
Freakin
Full Member
***
Offline Offline

Activity: 154
Merit: 100


View Profile
June 15, 2011, 05:02:37 PM
 #17

I'm running 2x MSI 6970s in one rig.  I have to run their fans at 100% in order to keep their temps around 80'C at night at 84'C during the day (apartment airconditioner struggling to keep the place at 72'F-75'F with all the PCs in this place)  I have their core clocks up as high as MSI afterburner would let me, and the memory as low as possible.

Is this normal?  I even placed this particular rig underneath one of the air conditioning vents and it has a 200mm+ fan directing the cold air directly on top of the graphic cards and I'm still barely managing to keep it below 80'C with 100% fans and a roughly 72'F room temp.

Anything below 90C should be fine. You don't have to struggle to keep them at 80C. If you can keep them at 90C or below, that should suffice.

90C on the core is pretty hot.  It will likely decrease lifespan of the card
hex
Newbie
*
Offline Offline

Activity: 45
Merit: 0



View Profile WWW
June 15, 2011, 09:02:41 PM
 #18

90C is not that much for a GPU. You can see that by fan profile.
My limit is 95.

But now I have water cooling. 70C @ 950 Mhz and completely silent Smiley
mlouca
Newbie
*
Offline Offline

Activity: 28
Merit: 0


View Profile
June 15, 2011, 09:15:20 PM
 #19

is 6970 the way to go even with the overheating scenario?
SmokeAndMirrors
Full Member
***
Offline Offline

Activity: 168
Merit: 100


View Profile
June 15, 2011, 09:35:00 PM
 #20

All GPU's have overheating scenarios.

To answer your question, 6970's are the way to go if you want to put the extra few bucks in to keep them well cooled. I don't say that because they tend to overheat, I say that because it would be sad to see such a nice card die on you while mining. Sapphires are good, I highly recommend them.

Help Bitcoins by buying clothes, technology, books, etc. through people/stores that accept BTC. This will increase overall value of BTC as well as mitigate unnecessary bank transaction fees.

My address -
1EM9HGg1SEa5Bux1rVEPxGqGSfNTTc9EkC
Pages: [1] 2 »  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!