 |
July 20, 2016, 07:47:23 AM |
|
Allright so back after some testing!
I used 4 of them on my avalon 4 draining about 180w on each, the cable got a tiny bit warm, so I let them run for 6 days when I was out of my home and all was good when I came home.
I also used 2 of them on my s5 (1 per card, to test their limits), once again it got a lillte warmer but still able to touch it and keep your hands on the cable with no problems, I left them like this for 2 days while closely monitoring, no traces of melting or smell of burn. That's 250-260w/cable
Last, I overclocket my s5 so it would eat up about 700w, with 1 cable per card and let them run for 24hrs, the cables where pretty hot in the end so I decided to stop the experiment, from my experience they would have melted in a few days at that power draw (and that's completely normal of course!)
TL;DR : great build, under 250w/cable no worries, don't go over 300 (nowadays miners usually don't go over 250w/cable so good as gold)
Thanks for the great service man, I left you some positive trust because you deserve it!
Cheers,
Q.
|
