[ZEPH] [IROON] [KASPA] [RVN] [CFX] [ETC] [XMR] Nanopool

[kisk]

Mined Pascal for a few hours yesterday and verified my bat was correct with other miners that are seeing results, only to find no record of my time dedicated to mining Pascal.  Nano was the first pool I ever used, but this certainly may be the last.

Yes I'm using Poloniex, yes I removed the -64.  Yes I searched only the Payload number.  Nothing.

Are you using both the address+payload? .. ie ... -u 86646-64.XXXXXXXXXXXXXXXXXXXXX.rig01 -p x

[1714871052]

1714871052

[1714871052]

1714871052

[1714871052]

1714871052

[1714871052]

1714871052

[1714871052]

1714871052

[Jackling]

If I want to mine PASC directly to Poloniex, what account name should I use before the payload?

[sminside]

6 hours not find block ?  what hanppen on your pool ?

[Raja_MBZ]

Pascal pool was badly needed, I'm now going to try out the dual mine, ETC+PASC on this same pool, but after I receive an answer to the following query:

6 hours not find block ?  what hanppen on your pool ?

[kisk]

6 hours not find block ?  what hanppen on your pool ?

I assume you're talking about XMR? Its not out of the ordinary to sometimes go 6hrs without finding a block. Its luck.

[nu1mlock]

Is your ETH pool down? I keep getting "Job timeout, disconnect, retry in 20 sec" with Claymore's. Other pools work just fine.

Edit: It started working again after about an hour.

Edit 2: It stopped working again. And started working again. Seems a bit sketchy.

[Qumiu]

this is my favourite pool since 2016, I hope nanopool add decred pool too, I like this.

[matmator]

nanopool is down !!!  

dos attack ?

It's 2 hours I mined for nothing!

[AlexNorth]

Yes, something wrong with pool. Tonight again pool down.

[cashen]

[2017-05-21 12:42:15] Starting on stratum+tcp://sia-us-east1.nanopool.org:7777
[2017-05-21 12:42:15] NVML GPU monitoring enabled.
[2017-05-21 12:42:15] 7 miner threads started, using 'sia' algorithm.
[2017-05-21 12:42:15] Failed to get extranonce1
[2017-05-21 12:42:15] Stratum subscribe answer id is not correct!
[2017-05-21 12:42:15] JSON-RPC call failed: (unknown reason)
[2017-05-21 12:42:15] ...retry after 30 seconds

[buffy007]

Hi

what happends with api site? http://api.nanopool.org (or https://api.nanopool.org)

I saw Cloudflare Error 502 - This page is currently offline

and now I see Apache site info: 403 Forbidden

website looks ok.

[poisson]

Looks like the site is down yet again.

I believe my balance will be coming up on its threshold soon. Perfect time to switch to another pool.

[molitar]

Error on nanopool..


ETH - Total Speed: 155.489 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:04
ETH: GPU0 28.177 Mh/s, GPU1 28.197 Mh/s, GPU2 14.648 Mh/s, GPU3 28.075 Mh/s, GPU4 28.193 Mh/s, GPU5 28.199 Mh/s
 SC - Total Speed: 0.000 Mh/s, Total Shares: 3, Rejected: 0
 SC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
 SC: http error #28.
 SC: Failed to connect to pool (sia-us-east1.nanopool.org:9980/miner/header?address=<address>&worker=miner2&email=<name>@gmail.com), retry in 10 sec...

Poisson I think you are right this persons HAS NOT responded to anyone having problems on the pool!  That means he/she does not care!  I am going to go to a pool with damn support!

[Rockett0]

Great pool so far. I have my rig pointed at your pool as well as my sons.

Question about setting email so I can adjust payout timing.

On Windows using standard claymore - no issues getting it to work.

On Ethos, when I attempt to define the email address I get a worker showing up called "incorrect worker name".


If anyone has defined "Email" on Ethos, could you post your changes from local.conf or claymore.stub.conf.

I think I'll have to wait 2 days for the worker "Incorrect worker name" to time out.

Thanks

[Rockett0]

Never got this working on ethos.

But I did find a solution to change settings.

1. Stop mining on ethos
2. Run claymore or similar on a windows machine
3. Specify the same Worker name as your ethos rig. Add in the email address per instructions.
4. Mine 15-20 shares and you can change your settings.
5. If you have more than one Rig, you have to repeat this for every worker name.
6. Done.  You can now change settings.

[treasure9]

Hi, when i'm trying to reach eth.nanopool.org i'm getting:
Error 502 Bad gateway

Does anyone facing this issue?

UPD: 20 minutes later seems to be ok

[buffy007]

Hi, when i'm trying to reach eth.nanopool.org i'm getting:
Error 502 Bad gateway

Does anyone facing this issue?

UPD: 20 minutes later seems to be ok

I hope it's only maintenance how they wrote on twitter 5 hours ago...

Some ETH statistics could be outdated on the web view in next few hours due to web-server maintenance.

[treasure9]

might be, thanks, could you share their twitter please?

[kol4in]

welcome new p2pool stratum+tcp://95.59.72.81:7903 commission 0% dashcoin X11
Guide mining
Login your wallet Parol x

[sawa]

welcome new p2pool stratum+tcp://95.59.72.81:7903 commission 0% dashcoin X11
Guide mining
Login your wallet Parol x

You have a 50% fee on your pool http://95.59.72.81:7903/fee

No one will mine with such a fee