voss836
Newbie
Offline
Activity: 16
Merit: 0
|
|
April 02, 2017, 02:06:32 AM |
|
the guide uses the inbuilt functionality of the wallet, so it will auto create the file masternode.conf addrlocal is yr wallet ip address. it might work ok without it. i've never tested. but .. if you dont have the line then it seems you're not doing it right this is the relevant bit .. i've modified it slightly hopefully for a tad more clarity to get your address:port go to debug console and enter "getpeerinfo"
I've tried that but it's not working. All I've done so far is send 5000EXCL to a new address in the wallet. Is there anything else I need to do beforehand?
|
|
|
|
bumbacoin
Legendary
Offline
Activity: 1638
Merit: 1036
|
|
April 02, 2017, 02:53:41 AM |
|
the guide uses the inbuilt functionality of the wallet, so it will auto create the file masternode.conf addrlocal is yr wallet ip address. it might work ok without it. i've never tested. but .. if you dont have the line then it seems you're not doing it right this is the relevant bit .. i've modified it slightly hopefully for a tad more clarity to get your address:port go to debug console and enter "getpeerinfo"
I've tried that but it's not working. All I've done so far is send 5000EXCL to a new address in the wallet. Is there anything else I need to do beforehand? are you getting any output from that command ? you need the 5000 coins, then the masternode.conf filled out, then it should work.
|
💦☔️🐳💚💖💛 | ★ | | ★
| | ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ | | ★ | 🐠👻🍗🌳🐵
|
|
|
|
voss836
Newbie
Offline
Activity: 16
Merit: 0
|
|
April 02, 2017, 03:01:45 AM |
|
the guide uses the inbuilt functionality of the wallet, so it will auto create the file masternode.conf addrlocal is yr wallet ip address. it might work ok without it. i've never tested. but .. if you dont have the line then it seems you're not doing it right this is the relevant bit .. i've modified it slightly hopefully for a tad more clarity to get your address:port go to debug console and enter "getpeerinfo"
I've tried that but it's not working. All I've done so far is send 5000EXCL to a new address in the wallet. Is there anything else I need to do beforehand? are you getting any output from that command ? you need the 5000 coins, then the masternode.conf filled out, then it should work. I'm getting an output from "getpeerinfo", it just doesn't include addrlocal. How do I fill out the .conf file? I thought you said this was automatic? I'm not the best with computers so sorry if it's obvious
|
|
|
|
bumbacoin
Legendary
Offline
Activity: 1638
Merit: 1036
|
|
April 02, 2017, 03:18:15 AM |
|
I'm getting an output from "getpeerinfo", it just doesn't include addrlocal. How do I fill out the .conf file? I thought you said this was automatic? I'm not the best with computers so sorry if it's obvious
lol. i see what you mean i'll need to update that tutorial. addrlocal no longer appears in that output, soooo, instead youcan do a "getinfo" then copy your ip data from that. .. as for the output file (masternode.conf) if you use the "create" option in the wallet via the masternodes tab. that file will be created automatically. you can create it manually, ie create a new txt file, rename to "masternode.conf" then you can manually enter the exact same details as you would if you used auto process, all the details are there in the tutorial. (hehe except the addrlocal issue)
|
💦☔️🐳💚💖💛 | ★ | | ★
| | ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ | | ★ | 🐠👻🍗🌳🐵
|
|
|
|
voss836
Newbie
Offline
Activity: 16
Merit: 0
|
|
April 02, 2017, 03:33:31 AM |
|
I'm getting an output from "getpeerinfo", it just doesn't include addrlocal. How do I fill out the .conf file? I thought you said this was automatic? I'm not the best with computers so sorry if it's obvious
lol. i see what you mean i'll need to update that tutorial. addrlocal no longer appears in that output, soooo, instead youcan do a "getinfo" then copy your ip data from that. .. as for the output file (masternode.conf) if you use the "create" option in the wallet via the masternodes tab. that file will be created automatically. you can create it manually, ie create a new txt file, rename to "masternode.conf" then you can manually enter the exact same details as you would if you used auto process, all the details are there in the tutorial. (hehe except the addrlocal issue) When using "getinfo" my IP data doesn't look like an address. Assuming it is ok, do I just add a random port number to the end? Dumprivkey also doesn't work for me.
|
|
|
|
bumbacoin
Legendary
Offline
Activity: 1638
Merit: 1036
|
|
April 02, 2017, 04:19:48 AM |
|
its' probably ipv6 , here's the two different formats. i've never tried it. so give it a go addnode=[2001:0:9d38:90d7:1ce9:2c3a:a6b5:1504] addnode=61.69.140.62 addnode=[2001:0:9d38:6abd:388b:a0d:c2ba:73c1] addnode=97.84.236.237 dumpprivkey ? ^ two p's (lol. another error in my tutorial .. and it's only been up there 10 months or so) if still no, you can try "help" to get a list of commands, and get proper speeling
|
💦☔️🐳💚💖💛 | ★ | | ★
| | ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ | | ★ | 🐠👻🍗🌳🐵
|
|
|
|
voss836
Newbie
Offline
Activity: 16
Merit: 0
|
|
April 02, 2017, 07:09:55 AM |
|
its' probably ipv6 , here's the two different formats. i've never tried it. so give it a go addnode=[2001:0:9d38:90d7:1ce9:2c3a:a6b5:1504] addnode=61.69.140.62 addnode=[2001:0:9d38:6abd:388b:a0d:c2ba:73c1] addnode=97.84.236.237 dumpprivkey ? ^ two p's (lol. another error in my tutorial .. and it's only been up there 10 months or so) if still no, you can try "help" to get a list of commands, and get proper speeling I got it to work thanks, however I restarted my computer, and now it's coming up as "not in the masternode list". When I click start, it says invalid private key (which is weird because it was working before). And when I try to edit it to check the private key, it won't let me. It also won't let me remove it. Any ideas on this problem?
|
|
|
|
forzendiablo
Legendary
Offline
Activity: 1526
Merit: 1000
the grandpa of cryptos
|
|
April 03, 2017, 12:58:56 AM |
|
IPV6 needs brackets so put: addnode=[2001:0:9d38:6abd:388b:a0d:c2ba:73c1]
other than this nodes work
for MN i used bumba guide and worked fine. just port and IP get from google
|
yolo
|
|
|
|
zephuros
Newbie
Offline
Activity: 49
Merit: 0
|
|
April 03, 2017, 03:25:54 AM |
|
my wallet is trolling me and wont let me send founds out is anyone else having this problem?
|
|
|
|
bumbacoin
Legendary
Offline
Activity: 1638
Merit: 1036
|
|
April 03, 2017, 04:13:16 AM |
|
my wallet is trolling me and wont let me send founds out is anyone else having this problem? go into debug console and type "repairwallet"
|
💦☔️🐳💚💖💛 | ★ | | ★
| | ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ | | ★ | 🐠👻🍗🌳🐵
|
|
|
|
zephuros
Newbie
Offline
Activity: 49
Merit: 0
|
|
April 03, 2017, 09:25:23 AM Last edit: April 03, 2017, 09:36:13 AM by zephuros |
|
my wallet is trolling me and wont let me send founds out is anyone else having this problem? go into debug console and type "repairwallet" did that twice and got this then when i got to send it acts like everything is good and tells me coins already spent 05:19:17  "wallet check passed" : true 05:19:21  repairwallet 05:19:21  "wallet check passed" : true 05:28:03  repairwallet 05:28:04 "mismatched spent coins" : 2, "amount affected by repair" : 5001.80000000 05:28:09  repairwallet 05:28:09 "wallet check passed" : true here transaction from 6 hours ago Status: conflicted, has not been successfully broadcast yet Date: 4/3/2017 05:22 To: EHYY1xAy3RF9JYhZku9zmQuQtwn9xnD9SY Debit: -5000.00 EXCL Transaction fee: -0.0001 EXCL Net amount: -5000.0001 EXCL Transaction ID: 750a3b57a722667462258c65977b66ff5a2c5bd7ac604067be67852fc81ec2b2-000 and another one after i repaired wallet again Status: 0/unconfirmed Date: 4/2/2017 22:02 To: EHYY1xAy3RF9JYhZku9zmQuQtwn9xnD9SY Debit: -5000.00 EXCL Transaction fee: -0.0001 EXCL Net amount: -5000.0001 EXCL Transaction ID: 4ef19d9fa54f6d94fd9df0c5dc03f6d79da5d4fab3c02a4d33ccb38bea12890e-000
|
|
|
|
voss836
Newbie
Offline
Activity: 16
Merit: 0
|
|
April 03, 2017, 10:04:45 AM |
|
IPV6 needs brackets so put: addnode=[2001:0:9d38:6abd:388b:a0d:c2ba:73c1]
other than this nodes work
for MN i used bumba guide and worked fine. just port and IP get from google
It's still not working so I'll step you through exactly what I've done. I'm keen to solve this problem once and for all 1. Entered my IP address in the address form. I've done this twice, once using the "ip" from "getinfo" in the console. I wrote it as [2001:0:9d38:6abd:388b:a0d:c2ba:73c1]:23230 The second time I just used my IP address from google eg 122.108.246.144:23230 2. Entered "dumpprivkey (and my masternode address)" in the console, and copied this privkey into the field. 3. entered "masternode outputs" in the console and entered the long string into the Tx Hash and the other number into the output index. I've got my output index as 0, but in the tutorial photo it's a 1. Does this matter? It shows up as 0 from masternode outputs 4. Clicked update and start. It starts up, a few coins might come through before it stops working, with the message "not in masternode list" appearing for the status. I've also copied the addnode stuff into the .conf file. I just pasted it in the next line in notepad. I'm assuming that's ok? Thanks for your help!
|
|
|
|
glebmanik
Newbie
Offline
Activity: 13
Merit: 0
|
|
April 03, 2017, 11:46:37 AM |
|
Hello,
i have 10k excl coin, how to activate masternode? i need a wallet?
|
|
|
|
bumbacoin
Legendary
Offline
Activity: 1638
Merit: 1036
|
|
April 03, 2017, 03:15:50 PM Last edit: April 03, 2017, 03:26:34 PM by bumbacoin |
|
IPV6 needs brackets so put: addnode=[2001:0:9d38:6abd:388b:a0d:c2ba:73c1]
other than this nodes work
for MN i used bumba guide and worked fine. just port and IP get from google
It's still not working so I'll step you through exactly what I've done. I'm keen to solve this problem once and for all 1. Entered my IP address in the address form. I've done this twice, once using the "ip" from "getinfo" in the console. I wrote it as [2001:0:9d38:6abd:388b:a0d:c2ba:73c1]:23230 The second time I just used my IP address from google eg 122.108.246.144:23230 2. Entered "dumpprivkey (and my masternode address)" in the console, and copied this privkey into the field. 3. entered "masternode outputs" in the console and entered the long string into the Tx Hash and the other number into the output index. I've got my output index as 0, but in the tutorial photo it's a 1. Does this matter? It shows up as 0 from masternode outputs 4. Clicked update and start. It starts up, a few coins might come through before it stops working, with the message "not in masternode list" appearing for the status. I've also copied the addnode stuff into the .conf file. I just pasted it in the next line in notepad. I'm assuming that's ok? Thanks for your help! maybe the masternode is stopping? try starting it again.
|
💦☔️🐳💚💖💛 | ★ | | ★
| | ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ | | ★ | 🐠👻🍗🌳🐵
|
|
|
|
bumbacoin
Legendary
Offline
Activity: 1638
Merit: 1036
|
|
April 03, 2017, 03:17:04 PM |
|
Hello,
i have 10k excl coin, how to activate masternode? i need a wallet?
hi, here's a tutorial on how to run a masternode http://bumbacoin.blogspot.com.au/2016/07/how-to-setup-exclusive-coin-master-node.htmlgive it a try also you have enough to run 2 masternodes as they're 5k each
|
💦☔️🐳💚💖💛 | ★ | | ★
| | ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ | | ★ | 🐠👻🍗🌳🐵
|
|
|
|
bumbacoin
Legendary
Offline
Activity: 1638
Merit: 1036
|
|
April 03, 2017, 03:24:16 PM |
|
my wallet is trolling me and wont let me send founds out is anyone else having this problem? go into debug console and type "repairwallet" did that twice and got this then when i got to send it acts like everything is good and tells me coins already spent 05:19:17  "wallet check passed" : true 05:19:21  repairwallet 05:19:21  "wallet check passed" : true 05:28:03  repairwallet 05:28:04 "mismatched spent coins" : 2, "amount affected by repair" : 5001.80000000 05:28:09  repairwallet 05:28:09 "wallet check passed" : true here transaction from 6 hours ago Status: conflicted, has not been successfully broadcast yet Date: 4/3/2017 05:22 To: EHYY1xAy3RF9JYhZku9zmQuQtwn9xnD9SY Debit: -5000.00 EXCL Transaction fee: -0.0001 EXCL Net amount: -5000.0001 EXCL Transaction ID: 750a3b57a722667462258c65977b66ff5a2c5bd7ac604067be67852fc81ec2b2-000 and another one after i repaired wallet again Status: 0/unconfirmed Date: 4/2/2017 22:02 To: EHYY1xAy3RF9JYhZku9zmQuQtwn9xnD9SY Debit: -5000.00 EXCL Transaction fee: -0.0001 EXCL Net amount: -5000.0001 EXCL Transaction ID: 4ef19d9fa54f6d94fd9df0c5dc03f6d79da5d4fab3c02a4d33ccb38bea12890e-000 maybe you could try one of your wallet backups, they are automatically generated regularly inside your data directory/backups just replace your current wallet.dat with one of the backups and try that. , another option is to dump your private keys, remove your current wallet.dat from the data directory - the wallet will now generate an empty and new wallet on startup, then import your private keys. - when i'm messing around like this, i generally copy the entire data directory for a total backup, this can then be used to replace anything i do.
|
💦☔️🐳💚💖💛 | ★ | | ★
| | ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ ████████████████ | | ★ | 🐠👻🍗🌳🐵
|
|
|
|
zephuros
Newbie
Offline
Activity: 49
Merit: 0
|
|
April 03, 2017, 10:27:52 PM |
|
my wallet is trolling me and wont let me send founds out is anyone else having this problem? go into debug console and type "repairwallet" did that twice and got this then when i got to send it acts like everything is good and tells me coins already spent 05:19:17  "wallet check passed" : true 05:19:21  repairwallet 05:19:21  "wallet check passed" : true 05:28:03  repairwallet 05:28:04 "mismatched spent coins" : 2, "amount affected by repair" : 5001.80000000 05:28:09  repairwallet 05:28:09 "wallet check passed" : true here transaction from 6 hours ago Status: conflicted, has not been successfully broadcast yet Date: 4/3/2017 05:22 To: EHYY1xAy3RF9JYhZku9zmQuQtwn9xnD9SY Debit: -5000.00 EXCL Transaction fee: -0.0001 EXCL Net amount: -5000.0001 EXCL Transaction ID: 750a3b57a722667462258c65977b66ff5a2c5bd7ac604067be67852fc81ec2b2-000 and another one after i repaired wallet again Status: 0/unconfirmed Date: 4/2/2017 22:02 To: EHYY1xAy3RF9JYhZku9zmQuQtwn9xnD9SY Debit: -5000.00 EXCL Transaction fee: -0.0001 EXCL Net amount: -5000.0001 EXCL Transaction ID: 4ef19d9fa54f6d94fd9df0c5dc03f6d79da5d4fab3c02a4d33ccb38bea12890e-000 maybe you could try one of your wallet backups, they are automatically generated regularly inside your data directory/backups just replace your current wallet.dat with one of the backups and try that. , another option is to dump your private keys, remove your current wallet.dat from the data directory - the wallet will now generate an empty and new wallet on startup, then import your private keys. - when i'm messing around like this, i generally copy the entire data directory for a total backup, this can then be used to replace anything i do. back up wallet didn't work so were are the private keys so i can copy and dump?
|
|
|
|
voss836
Newbie
Offline
Activity: 16
Merit: 0
|
|
April 03, 2017, 10:43:34 PM |
|
IPV6 needs brackets so put: addnode=[2001:0:9d38:6abd:388b:a0d:c2ba:73c1]
other than this nodes work
for MN i used bumba guide and worked fine. just port and IP get from google
It's still not working so I'll step you through exactly what I've done. I'm keen to solve this problem once and for all 1. Entered my IP address in the address form. I've done this twice, once using the "ip" from "getinfo" in the console. I wrote it as [2001:0:9d38:6abd:388b:a0d:c2ba:73c1]:23230 The second time I just used my IP address from google eg 122.108.246.144:23230 2. Entered "dumpprivkey (and my masternode address)" in the console, and copied this privkey into the field. 3. entered "masternode outputs" in the console and entered the long string into the Tx Hash and the other number into the output index. I've got my output index as 0, but in the tutorial photo it's a 1. Does this matter? It shows up as 0 from masternode outputs 4. Clicked update and start. It starts up, a few coins might come through before it stops working, with the message "not in masternode list" appearing for the status. I've also copied the addnode stuff into the .conf file. I just pasted it in the next line in notepad. I'm assuming that's ok? Thanks for your help! maybe the masternode is stopping? try starting it again. It is stopping, and when I start it again it works for a few minutes to half an hour and then stops again. But I don't want to have to restart it 30 times a day
|
|
|
|
wantrepreneur
|
|
April 04, 2017, 01:05:45 AM Last edit: April 04, 2017, 02:16:29 AM by wantrepreneur |
|
EXCL is slowly creeping up again! makes sense, our tech is comparable to PIVX + DASH... we're sitting on a goldmine here, so let's get organized, starting with a slack channel! (I was with PIVX during the 2000% pump, and it wouldn't have been possible without their slack channel...) so yea, i've also setup a subreddit, as reddit is an awesome place to inform other crypto-communities about how great EXCL is, be sure to subscribe and comment and even help mod if you like! www.reddit.com/r/EXCL
|
|
|
|
|