[ANN] Exclusive Coin EXCL 3.0 - MasterNodes, ProofOfStake, 5 years old, Android!

[andrew24p]

hey bumba, I was wondering if you could help me out. I have a stuck transaction that hasnt been confirmed for a while now with a fee. I sent it to another address in my own wallet and it is just sitting with zero confirmations doing nothing. it was for a little over 15k

[1714843201]

1714843201

[1714843201]

1714843201

[1714843201]

1714843201

[1714843201]

1714843201

[bumbacoin]

hey bumba, I was wondering if you could help me out. I have a stuck transaction that hasnt been confirmed for a while now with a fee. I sent it to another address in my own wallet and it is just sitting with zero confirmations doing nothing. it was for a little over 15k

hopefully just a matter of resendtx via the debug/console.

hope my PM helps

[wantrepreneur]

hey!

TehMoonwalker from the slack channel is planning to make an EXCL infographic (PIVX vs EXCL) + (Dash vs EXCL), similar to the one PIVX made which helped make them get so popular. Checkout the link below, we're getting one of these for EXCL!

https://pivx.org/2017/03/08/infographic-pivx-vs-dash/

[reader31]

try using this for a bootstrap. (possibly won't be compatible).
it needs to be called "bootstrap.dat" and put in your datadirectory

if it bugs out before finishing,
rename it back to "bootstrap.dat" and try again.

it's up to around block 352000

https://drive.google.com/open?id=0B5j8d4FSc7dreVhzb2ljbW9kdWs

Thanks bumba, just to be clear, it goes in the exclivecoin file in appdata/roaming where the config, wallet, ect is right?

absolutely
you dont' need to delete the old chain or anything, it'll continue from where it is up to.

i just noticed there's also a bootstrap available here, http://cryptochainer.com/dir/?page_id=881
but i dont see any info's on how old/current it is.

also..If we are going to do a hardfork then we should consider uping the masternode rewards to somewhere near 50% to encourage ppl to create more masternode?

I agree, I think a 7500 requirement and a 50% masternode reward is a good incentive for people to invest in the network long term while also incentivizing buying the currency.

it is actually 50% atm, seems a incorrect amount in OP
https://github.com/exclfork/ExclusiveCoin/blob/master/src/main.cpp#L4675

Someone should update this in the OP then!

[laugh2btc]

How many coins do i get with a masternode in 1 month?

[bumbacoin]

How many coins do i get with a masternode in 1 month?

1 minute blocks
~1440 blocks/day @ 0.5excl masternode reward

apparently 49 masternodes atm.
1440/49 = ~29 blocks each masternode/day

as masternode count changes so does avg reward.


edit.
mn count just went to 50 no idea how many there really are

[andrew24p]

We should get a nice graphic with all the information to put on the first post to help show a high level of quality of our coin. Are there any graphic artists  that might be willing to do it ? I could do a mock up, but im an amateur photoshopper at most.

[tehMoonwalker]

We should get a nice graphic with all the information to put on the first post to help show a high level of quality of our coin. Are there any graphic artists  that might be willing to do it ? I could do a mock up, but im an amateur photoshopper at most.

i can help with graphics for some free coins

[wantrepreneur]

We should get a nice graphic with all the information to put on the first post to help show a high level of quality of our coin. Are there any graphic artists  that might be willing to do it ? I could do a mock up, but im an amateur photoshopper at most.

yes, agreed. there are so many small improvements we can do to make excl better, let's keep it up guys things are starting to look really bullish.

[bumbacoin]

this is going to be a quick and slightly messy post i'm not going in depth to how you do each step, so hopefully you can work it out or someone else can expand it
it uses the exclusivecoind.exe which is the command line wallet, no gui, so you send it rpc calls to interact with it.

a basic method to address the seeming issue where running multiple masternode with a single exclusivecoin instance is problematic, they stop after a while.

i use a workaround in linux where i setup a cronjob to restart them every 15 minutes.
the basic format is

Code:

*/15 * * * * * exclusivecoind masternode start-many

to replicate this in windows you need a couple basic steps, not to mention setting up yr actual masternodes.

1) you need the exclusivecoind.exe available here https://github.com/exclfork/ExclusiveCoin/tree/master/releases
to run the coind the exclusivecoin.conf file will need

Code:

rpcuser=yourusername
rpcpassword=youruserpassword

2) a bat file to run.
in the bat file, will be a simple loop to send a command to the exclusivecoind.exe

1- download the file,
make sure you added rpcuser/rpcpassword to your .conf file
to run you will need a command prompt, cd to where file is located

Code:

start /b exclusivecoind.exe

using "start" means it will run in background so you can interface with it eg. "exclusivecoind.exe getinfo"
2- in a windows explorer navigate to where you want the bat file to run (mine is in same location as coind.exe),
right click > create new text file
rename to "whatever.bat"
right click file > edit

Code:

:loop
exclusivecoind.exe masternode start-many
timeout /t 900 /nobreak
goto :loop

open another command terminal, navigate to where the bat file is then start it.

Code:

whatever.bat

done.
now you can send rpc commands to the coind in the first command window while the second just loops until you close it.
if yr masternodes stop due to the "issue", then every 15 minutes (900 seconds) the command to start-many should kick them back into life.

NOTE.
you cannot run the qt-wallet and teh coind at the same time unless you use seperate datadirectories.

[wantrepreneur]

bumba you're a god, thanks boss.

[bumbacoin]

bumba you're a god, thanks boss.

heh i hope it works i havent actually tried it on windows but it looks ok. lol

[Termie]

Dump slowly and will end up to the original price.

direct opposite at the moment. Price and demand slowly rising, available coins decreasing.

[bits4books]

nice work on the coin

[exclusivecoin]

Slack added to OP + website. Twitter looks adujested.
Buys looking good, we have more and more MasterNodes now too so network is secured.

Edited OPs numbers:
Algorithm: 100% PoS
Block reward: 0.5 EXCL
MasterNode:5 000 EXCL to start, 0.5 EXCL Reward per Block
40 confirms to maturity
24 hour stake min age

[forzendiablo]

Slack added to OP + website. Twitter looks adujested.
Buys looking good, we have more and more MasterNodes now too so network is secured.

Edited OPs numbers:
Algorithm: 100% PoS
Block reward: 0.5 EXCL
MasterNode:5 000 EXCL to start, 0.5 EXCL Reward per Block
40 confirms to maturity
24 hour stake min age

WOW thanks for this great updates.

i have been with this coin since day one, and now i feel how its great!

[bits4books]

excl looking good , good job dev

[happycamper89]

this is going to be a quick and slightly messy post i'm not going in depth to how you do each step, so hopefully you can work it out or someone else can expand it
it uses the exclusivecoind.exe which is the command line wallet, no gui, so you send it rpc calls to interact with it.

a basic method to address the seeming issue where running multiple masternode with a single exclusivecoin instance is problematic, they stop after a while.

i use a workaround in linux where i setup a cronjob to restart them every 15 minutes.
the basic format is

Code:

*/15 * * * * * exclusivecoind masternode start-many

to replicate this in windows you need a couple basic steps, not to mention setting up yr actual masternodes.

1) you need the exclusivecoind.exe available here https://github.com/exclfork/ExclusiveCoin/tree/master/releases
to run the coind the exclusivecoin.conf file will need

Code:

rpcuser=yourusername
rpcpassword=youruserpassword

2) a bat file to run.
in the bat file, will be a simple loop to send a command to the exclusivecoind.exe

1- download the file,
make sure you added rpcuser/rpcpassword to your .conf file
to run you will need a command prompt, cd to where file is located

Code:

start /b exclusivecoind.exe

using "start" means it will run in background so you can interface with it eg. "exclusivecoind.exe getinfo"
2- in a windows explorer navigate to where you want the bat file to run (mine is in same location as coind.exe),
right click > create new text file
rename to "whatever.bat"
right click file > edit

Code:

:loop
exclusivecoind.exe masternode start-many
timeout /t 900 /nobreak
goto :loop

open another command terminal, navigate to where the bat file is then start it.

Code:

whatever.bat

done.
now you can send rpc commands to the coind in the first command window while the second just loops until you close it.
if yr masternodes stop due to the "issue", then every 15 minutes (900 seconds) the command to start-many should kick them back into life.

NOTE.
you cannot run the qt-wallet and teh coind at the same time unless you use seperate datadirectories.

Yea I was having the same case issue with timing out. Followed your post and, voila! Now I'm mining blocks non-stop. Thanks!

[Termie]

just now it temporary overrun 11000 - very cool!
I really hope that this coin will also be added to other big exchanges -> "moon"!

[bits4books]

Bittrex is good for the coin , maybe we should contact poloniex also for adding the coin .