Etarminer - New cuda miner for ethereum

[kyne]

Hello Etar, I got an error can't run. I'm using GTX660

Code:

24/11/13:44:47:Start miner

24/11/13:44:50:Gpu0 error cuMemAlloc(Dag)-2
1479995090GPU0 error in dagfunction

your gtx 660 maybe have only 2Gb memory?

Yes, 2G Memory is not enough to mine ETH right ?

[1715229412]

1715229412

[Etar]

Yes, 2G Memory is not enough to mine ETH right ?

Sometimes enough, sometimes not (especially if the card is one and the same desktop on it)
You can try a different currency with Etash algo which less epoch. Expanse for ex.

And redownload v1.9 slightly faster.

GTX660 -exp1 -int 20 -wsz 128   no overclocking - 11,5MX/c
GTX660 -exp1 -int 20 -wsz 128  Core+80, Memory +150, 12+MX/c

GTX1060 3GB (Palit, Inno)  -exp0 -int 20 -wsz 64 Memory +500, Power Limit  75% - 20,5MX/c
GTX1060 3GB (Palit, Inno)  -exp0 -int 20 -wsz 64 Memory +700, Power Limit  100% - 21,5MX/c

[kyne]

Yes, 2G Memory is not enough to mine ETH right ?

Sometimes enough, sometimes not (especially if the card is one and the same desktop on it)
You can try a different currency with Etash algo which less epoch. Expanse for ex.

And redownload v1.9 slightly faster.

GTX660 -exp1 -int 20 -wsz 128   no overclocking - 11,5MX/c
GTX660 -exp1 -int 20 -wsz 128  Core+80, Memory +150, 12+MX/c

GTX1060 3GB (Palit, Inno)  -exp0 -int 20 -wsz 64 Memory +500, Power Limit  75% - 20,5MX/c
GTX1060 3GB (Palit, Inno)  -exp0 -int 20 -wsz 64 Memory +700, Power Limit  100% - 21,5MX/c

ok, Thank you for your help. I'll try to test it.

[CGho05t]

Дoбpoгo вpeмeни cyтoк гocпoдa. У мeня "ZOTAC GeForce GTX 770 ZT-70302-10P c нeзнaчитeльным зaвoдcким paзгoнoм гpaфичecкoгo чипa". Tyт пpoчёл чтo кapты дaннoй cepии cпocoбны выдaть 19+ MH/s. У мeня жe дeлo oбcтoит тaк чтo дaннaя кapтa выдaёт 15.5 в cтoкe и 17.3 в paзгoнe нa дpaйвepax 347.88 (c любыми дpyгими дpoвaми cкopocть нижe). Пoдcкaжитe, мoжeт быть дeлo в пpoцeccope? Tип ЦП DualCore Intel Core i3-2120, 3400 MHz (33 x 103). Кaк я пoнял дaнный кaмeнь в игpax видeoкapтy нe pacкpывaeт, мaкcимyм чeгo мнe yдaвaлocь дoбитьcя этo 80% зaгpyзки. Tecтиpoвaл в Windows 7/10 64 Ultimate/Pro - paзницы нeт.

Пoчитaйтe в этoй вeткe: https://forum.bits.media/index.php?/topic/27976-etarminer-novyi-mainer-ethereum-dlia-cuda/
Taм y чeлoвeкa 770 и 760 ecть.
и для kepler лyчшe -exp 1
-wsz 128  (256 мнoгoвaтo, нaдo пpoвepять. Haпpимep, нa 660 -wsz 128 лyчшe, a нa Pascal -wsz 64 эффeктивнee.)

Cпacибo. пocтaвил "-int 20 -wszg g0 128 -toffg g0 100 -slcg g0 -exp 1". Былo 17.7 MH/s, cтaлo 18.3 MH/s . Boт тaкaя cтpaннaя штyкa, в вepcии 1.8 пoд paзгoнoм кapтoчкa пocтoяннo cлeтaлa нa 0, пoмeнял -toffg g0 c 85 нa 100, пpибaвилa 0,3 MH/s и пepecтaлa cбpacывaтьcя.

[Nikolaj]

28/29 (+600 ram) on 8.1 64 bit, 1070 stock

[reb0rn21]

Win 10, WDDM 2.1 375.95

1070 only 10MH/s

Please fix support for windows 10

[QuintLeo]

Hello Etar, I got an error can't run. I'm using GTX660

Code:

24/11/13:44:47:Start miner

24/11/13:44:50:Gpu0 error cuMemAlloc(Dag)-2
1479995090GPU0 error in dagfunction

your gtx 660 maybe have only 2Gb memory?

Yes, 2G Memory is not enough to mine ETH right ?

 It's getting very marginal at best - I just realised a couple of nights back I didn't have ant of my rigs with 2GB cards back online yet - turns out my pair of 2GB HD 7870s can still run ETH but they're 60-80% more profitable on ZEC right now, so I'll probably just leave them pointed that way even when the profitability drops back to parity ballpark.
 Moving over to ETC might also be an option, it's generally very close on profitability to ETH.


 For comparison - Genoil 1.1.13 on my 1070 rigs with Afterburner set for +550 memory, -200 core, 75% power limit pull 28-29 Mh/s under Windows 7 with the 372.70 drivers. I've had nothing but ISSUES out of any of the 375 series, and NVidia has stated in at least one of their "known issues" on one of the 375 series drivers that they had problems with Folding@home - I suspect that issue likely ALSO affects mining.

[Etar]

Win 10, WDDM 2.1 375.95

1070 only 10MH/s

Please fix support for windows 10

I try fix it, but now no result yet. Maybe this is becouse i use cuda driver api. As i know other miners use cuda realtime api.
At Win10 random access memory is very-very slow.

[reb0rn21]

Win 10, WDDM 2.1 375.95

1070 only 10MH/s

Please fix support for windows 10

I try fix it, but now no result yet. Maybe this is becouse i use cuda driver api. As i know other miners use cuda realtime api.
At Win10 random access memory is very-very slow.

Are you using Windows 10 anniversary version 1607?

after they fixed TLB on nvidia with wddm 2.1, I can say win7 is faster with claymore and genoil under win7 at all

[Etar]

Win 10, WDDM 2.1 375.95

1070 only 10MH/s

Please fix support for windows 10

I try fix it, but now no result yet. Maybe this is becouse i use cuda driver api. As i know other miners use cuda realtime api.
At Win10 random access memory is very-very slow.

Are you using Windows 10 anniversary version 1607?

after they fixed TLB on nvidia with wddm 2.1, I can say win7 is faster with claymore and genoil under win7 at all

Win10 version 1607 build 14393.447
Strange things:
Random access to memory slows down execution..
But if access only to one memory adress - all work fine.
I think, something nvidia is not fixed..

[giagge]

Win 10 is more fast to win 7 .

Claymore 7.4 with gtx 1070 , and windows 10 last update and last nvidia driver have 27mhs for card in my system .

[tc61]

What is your launch config look like, im only getting 20 on my 1070

thx

[Etar]

What is your launch config look like, im only getting 20 on my 1070

thx

what os?

-exp 0  -wsz 64

[Etar]

linux support?

Soon.. Today i am launch etarminer at Ubuntu 16.04

[tc61]

Etar,

Im using win 10

[Etar]

Etar,

Im using win 10

Oh,, at win 10 i have 3Mh/s on GTX1060 )) I am not fix slow execution at win10 yet...
At WIN7, Linux, Vista64 work fine!
What driver you are used? And what version and build WIN10?

[giagge]

Claymore 7.4 with gtx 1070 27mhs for card in my system On Windows 10 .

.

.

[QuintLeo]

Win 10 is more fast to win 7 .

Claymore 7.4 with gtx 1070 , and windows 10 last update and last nvidia driver have 27mhs for card in my system .

 That's not as fast as I'm seeing under Win 7 as I previously posted, much less "more fast".

 Win 10 is widely reported to have issues with some of the NVidia driver versions - seems to be VERY picky there - but with the "correct" driver version(s) is about the same as Win 7.

[Etar]

LINUX version Etarminer 1_8 available
https://drive.google.com/drive/folders/0B9DK4ZXu8liUMkxpVkxaSHJGTms
Tested on Ubuntu 16.04

[rednoW]

Claymore 7.4 with gtx 1070 27mhs for card in my system On Windows 10 .

claymore 6.3 with gtx 1070 33mhs for card in my system On Windows 7 )) 65%tdp