Setup my new rig today, have a lot of problems to solve

[Redrose]

So, my new rig is composed of a 970 and a 1070.

My problems are :

-Neoscrypt : "Share above target"
-LyraREV2 :  "Result does not validate on CPU"
-Hashimoto : Only 44 MH/s with the two cards where I should except something like 55 MH/s according to many members (20+35 MH/s)

Just ask me what you want to know more to determine what's bad and I hope help me, since I can only mine LBRY for now ...

[BTCBusinessConsult]

First question would be are you using the correct miner for each algo? Ie a GPU miner for the CPU coins etc? Which miner are you using for Eth?

Did you set the GPU properties so they get 100% of the power allocation etc etc?

[Redrose]

First question would be are you using the correct miner for each algo? Ie a GPU miner for the CPU coins etc? Which miner are you using for Eth?

Did you set the GPU properties so they get 100% of the power allocation etc etc?

I'm not that noob, that's not my first rig . But with Nvidia cards it is.

I use ccminer 1.8.1 for LBRY and I tried the special fork that give a boost of hashrate, but even the ccminer 1.8.1 give the same errors.

It's weird on with Nvidia cards, GPU load can go beyong 100% according to MSI Afterburner (WTF ?) . On AMD I didn't had to set anything such as allocation so I entered nothing here.

[Amph]

share above target is strange? the invalide cpu thing it's normal if you have the last driver, it need to be fixed, for now use 369.09 drivers

hashrate on hashimoto is 20+30 not 35MH for a 1070, for reaching 50MH you need to tweak the 1070 to +600 mem and 120 core

[Redrose]

share above target is strange? the invalide cpu thing it's normal if you have the last driver, it need to be fixed, for now use 369.09 drivers

hashrate on hashimoto is 20+30 not 35MH for a 1070, for reaching 50MH you need to tweak the 1070 to +600 mem and 120 core

Okay, I understand these two solutions. For share above target, I have to add that it does me that only on a single pool. So I can consider that all my problems are solved since I moved of that pool . Thank you Amph, super, as always !

[Psynthax]

Sorry for hijacking your thread but I have some problems with my mining rig too..

My problem is when I sometimes run a ccminer my whole rig starts to lag and when I close the miner it drops a bluescreen, it happends every time I switch coins to mine..

I am running 4 1070 on asrock B85 anniversary mbo on win 10 32bit anniversary update.

Any help would be appreciated.. Thanks

[Redrose]

Sorry for hijacking your thread but I have some problems with my mining rig too..

My problem is when I sometimes run a ccminer my whole rig starts to lag and when I close the miner it drops a bluescreen, it happends every time I switch coins to mine..

I am running 4 1070 on asrock B85 anniversary mbo on win 10 32bit anniversary update.

Any help would be appreciated.. Thanks

No problem mate, we're here to help each other. With Nvidia cards, the computer always lag when it is mining. You can correct this by lowering the intensity on the GPU that gives the video output, but it isn't worth I think. Except in some rare cases, I don't think you would have to switch coins that often.

The cause of the blue screen is unknown to me however .

[Amph]

Sorry for hijacking your thread but I have some problems with my mining rig too..

My problem is when I sometimes run a ccminer my whole rig starts to lag and when I close the miner it drops a bluescreen, it happends every time I switch coins to mine..

I am running 4 1070 on asrock B85 anniversary mbo on win 10 32bit anniversary update.

Any help would be appreciated.. Thanks

if the drivers crash the problem lie on the gpu setting, otherwise it maybe an HW problem

[Psynthax]

no it is not regular mining lagging.. it is lagging badly and I get reduced hashrate.. when I exit miner I get blue screen.. Then it resets and starts working fine for days, then if I decide to switch to another coin every time I get that nasty lag, reduced hashrate and bluescreen..

overclocks and drivers are fine, I am using 369.09 driver and it works for days without problems..

I am suspecting it has to do something with win 10 anniversary update because since I updated on my main pc I get random blue screens too.. hmm..

[Redrose]

no it is not regular mining lagging.. it is lagging badly and I get reduced hashrate.. when I exit miner I get blue screen.. Then it resets and starts working fine for days, then if I decide to switch to another coin every time I get that nasty lag, reduced hashrate and bluescreen..

overclocks and drivers are fine, I am using 369.09 driver and it works for days without problems..

I am suspecting it has to do something with win 10 anniversary update because since I updated on my main pc I get random blue screens too.. hmm..

Here is your problem. Why the hell are you using that ? Windows 7 is so more strong, reliable, battle hardened, secure... Try to change your drivers to 368.latest. Thta's the one I'm using and they solved some of my problems over the most recent one (that is not yours, I know).

[ioglnx]

The Win10 anniversary update is pain in the ass if you did the update. I had many issues after the update.
I made a fresh install of the 1607 build from MSDN ISO and now it runs smooth and no BS.