lordmick (OP)
|
|
October 15, 2016, 05:13:55 AM |
|
is there anybody who can help me?.. I have a defective antminer S3 I can access to the web interface.. play with config and see logs but the fan dont spin it get 0 hash red LED is on I got other miner I compare every config and log I found this in the defective one.. [ 6.340000] hub 1-1:1.0: 2 ports detected [ 6.630000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform [ 6.730000] usb 1-1.1: device descriptor read/64, error -32 [ 6.920000] usb 1-1.1: device descriptor read/64, error -32 [ 7.110000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform [ 7.210000] usb 1-1.1: device descriptor read/64, error -32 [ 7.400000] usb 1-1.1: device descriptor read/64, error -32 [ 7.590000] usb 1-1.1: new full-speed USB device number 5 using ehci-platform [ 8.010000] usb 1-1.1: device not accepting address 5, error -32 [ 8.110000] usb 1-1.1: new full-speed USB device number 6 using ehci-platform [ 8.530000] usb 1-1.1: device not accepting address 6, error -32 [ 8.530000] hub 1-1:1.0: unable to enumerate USB device on port 1
|
|
|
|
|
|
|
|
There are several different types of Bitcoin clients. The most secure are full nodes like Bitcoin Core, but full nodes are more resource-heavy, and they must do a lengthy initial syncing process. As a result, lightweight clients with somewhat less security are commonly used.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
October 15, 2016, 06:39:13 AM |
|
Antminer S3 doesn't have anything using USB.
|
|
|
|
in2tactics
|
|
October 15, 2016, 11:18:44 AM |
|
Antminer S3 doesn't have anything using USB.
I thought the LAN adapter was USB.
|
Current HW: 2x Apollo Retired HW: 3x 2PAC, 3x Moonlander 2, 2x AntMiner S7-LN, 5x AntMiner U1, 2x ASICMiner Block Erupter Cube, 4x AntMiner S3, 4x AntMiner S1, GAW Black Widow, and ZeusMiner Thunder X6
|
|
|
lordmick (OP)
|
|
October 15, 2016, 01:17:54 PM |
|
Antminer S3 doesn't have anything using USB.
I thought the LAN adapter was USB. but even if its a lan adaptor I have access to the webgui and I also tried a hard reset and other miners does not have this usb error..
|
|
|
|
lordmick (OP)
|
|
October 15, 2016, 03:17:49 PM |
|
I exchange the controller board with another miner and the problem follow the controller..
|
|
|
|
Finksy
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
October 15, 2016, 07:04:57 PM |
|
Have you considered just replacing it with an S5? Given how cheap the S5's are now, considerably higher hashrate-efficiency, etc. I personally wouldn't be willing to invest any time in diagnosing or replacing parts on an S3. Even with free electricity, you are better off with S5's. Just my opinion before you invest too much time/money into it.
|
|
|
|
lordmick (OP)
|
|
October 16, 2016, 02:02:48 AM |
|
Have you considered just replacing it with an S5? Given how cheap the S5's are now, considerably higher hashrate-efficiency, etc. I personally wouldn't be willing to invest any time in diagnosing or replacing parts on an S3. Even with free electricity, you are better off with S5's. Just my opinion before you invest too much time/money into it.
if I have to invest money on it I will keep it for parts.. I use it just to heat my house.. using this and a wood stove when too cold..
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
October 17, 2016, 06:28:50 AM |
|
|
|
|
|
lordmick (OP)
|
|
November 12, 2016, 04:36:43 PM |
|
I found this in the defective one.. root@antMiner3:/dev/bus/usb/001# ls 001 002 root@antMiner3:/dev/pts# ls 0 and in a working unit it look like this root@antMiner8:/dev/bus/usb/001# ls 001 002 004 root@antMiner8:/dev/pts# ls 0 1 anybody know how to fix this?..
|
|
|
|
|