[BTE][Closed][Faucet]Bytecoin Faucet

[LucasJones]

Bytecoin Faucet:

Bytecoin Faucet is a community faucet for bytecoins (People donate the funds that are given out).

Current Rate: 0.1 BTE Per payout

Visit the site: [Closed for now]

Donations directly to the FAUCET:
8adiaZcaVjiE4vXkztRaLMrSDikPuY8grc

Donations to DEVELOPER/OPERATOR (NOT THE FAUCET):
8QNbwJ7uQNqYiJ7cGwgTfBvvesLYGsngda

***25/5/2013 - Pool is now closed***
***29/5/2013 - Faucet is closed for now as I no longer have sufficient server power to host it. Will be reopened if I can put together enough power***

[Turbo1980]

The link is wrong

Here is corrected http://bytecoin.us.to:8000/

[LucasJones]

The link is wrong

Here is corrected http://bytecoin.us.to:8000/

Oh, thanks, I corrected it just after I posted
The forum seemed to add an extra 'http://' before the url.

[allthingsluxury]

Very nice.

[LucasJones]

Very nice.

Thank you

The frontend is fine, but unfortunately the backend server has fallen apart.

I was using the Bytecoin Block Explorer to grab the balance of the account, but it doesn't work anymore due to the way transactions work, the account is shown as empty(as it technically is), so I had to switch the entire backend process to manual work :/. I'm trying to fix this as fast as I can but I have to keep the faucet going, so I'm considering closing it for a few hours later today.

[LucasJones]

Thank you to whoever donated 10 BTE to the Faucet

[LucasJones]

What does everyone think about having a mining pool that supports the faucet, as in a small percentage of the coins from each block go to the faucet?

Please leave any feedback or comments, and I'll try to set one up if the idea has a positive reaction 

[LucasJones]

Note: The Bytecoin Faucet will be down for a few minutes, I need to restart the server
I will edit this post when it is back up.

EDIT: Server back up

[LucasJones]

Created a P2Pool (modified by Gerco) mining server for the faucet

5% fee on pool, half of it goes to the faucet's funds.

http://bytecoin.us.to:6327

Username: Payout Address
Password: 1

[LucasJones]

Created a P2Pool (modified by Gerco) mining server for the faucet

5% fee on pool, half of it goes to the faucet's funds.

http://bytecoin.us.to:6327

Username: Payout Address
Password: 1

I can't get any shares with reaper!
I get shares according to gui miner, but the server still won't log them.

8XSXmLJ5DB6qpdEhqv4EcfkcFUmDwa8rBA is my address

Checklist:

• Username = Your Payout Address
• Password = 1
• Checked the console to see if shares are actually being accepted
• Aren't just submitting stale shares
• Have a decent hash rate (e.g 10MH/s+ at least)

Try those things, if you can't find the problem post the console log here

[Teka]

Created a P2Pool (modified by Gerco) mining server for the faucet

5% fee on pool, half of it goes to the faucet's funds.

http://bytecoin.us.to:6327

Username: Payout Address
Password: 1

I can't get any shares with reaper!
I get shares according to gui miner, but the server still won't log them.

8XSXmLJ5DB6qpdEhqv4EcfkcFUmDwa8rBA is my address

I'm also having problems with server not logging my  shares

my address is 8VcNiDbUvSrLB8c8sdXFGWVGXzWrHbh5Dp

[LucasJones]

I'm getting 130 MH/s


2013-04-04 11:55:44: Listener for "byte pool" started
2013-04-04 11:55:45: Listener for "byte pool": 04/04/2013 11:55:45, started OpenCL miner on platform 0, device 0 (Juniper)
2013-04-04 11:55:45: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:45, checking for stratum...
2013-04-04 11:55:49: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:49, diverted to stratum on bytecoin.us.to:6327
2013-04-04 11:55:52: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:52, Setting new difficulty: 0.999984741211
2013-04-04 11:55:53: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:53, Setting new difficulty: 0.999984741211
2013-04-04 11:55:53: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:53, authorization failed with 8XSXmLJ5DB6qpdEhqv4EcfkcFUmDwa8rBA:1@bytecoin.us.to:6327
2013-04-04 11:55:53: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:53, Setting new difficulty: 0.999984741211
2013-04-04 11:55:56: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:56, IO errors - 1, tolerance 2

It looks like the server isn't accepting your login details ('authorization failed'), so you aren't being registered and the server isn't accepting shares to your name :/

I'll see what I can do, this has happened to me before, as this seems to be a quite common problem with p2pool, or at least p2pool with bytecoin

[Teka]

I'm getting 130 MH/s


2013-04-04 11:55:44: Listener for "byte pool" started
2013-04-04 11:55:45: Listener for "byte pool": 04/04/2013 11:55:45, started OpenCL miner on platform 0, device 0 (Juniper)
2013-04-04 11:55:45: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:45, checking for stratum...
2013-04-04 11:55:49: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:49, diverted to stratum on bytecoin.us.to:6327
2013-04-04 11:55:52: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:52, Setting new difficulty: 0.999984741211
2013-04-04 11:55:53: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:53, Setting new difficulty: 0.999984741211
2013-04-04 11:55:53: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:53, authorization failed with 8XSXmLJ5DB6qpdEhqv4EcfkcFUmDwa8rBA:1@bytecoin.us.to:6327
2013-04-04 11:55:53: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:53, Setting new difficulty: 0.999984741211
2013-04-04 11:55:56: Listener for "byte pool": bytecoin.us.to:6327 04/04/2013 11:55:56, IO errors - 1, tolerance 2

It looks like the server isn't accepting your login details ('authorization failed'), so you aren't being registered and the server isn't accepting shares to your name :/

I'll see what I can do, this has happened to me before, as this seems to be a quite common problem with p2pool, or at least p2pool with bytecoin

Looks like I'm having the same problem:

2013-04-04 17:09:07: Listener for "Default": 04/04/2013 17:09:07, started OpenCL miner on platform 1, device 0 (Quadro K5000M)
2013-04-04 17:09:08: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:08, checking for stratum...
2013-04-04 17:09:08: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:08, diverted to stratum on bytecoin.us.to:6327
2013-04-04 17:09:08: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:08, Setting new difficulty: 1.29718570116
2013-04-04 17:09:09: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:09, authorization failed with 8VcNiDbUvSrLB8c8sdXFGWVGXzWrHbh5Dp:1@bytecoin.us.to:6327
2013-04-04 17:09:09: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:09, Setting new difficulty: 1.27240181007
2013-04-04 17:09:12: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:12, IO errors - 1, tolerance 2

[LucasJones]

Looks like I'm having the same problem:

2013-04-04 17:09:07: Listener for "Default": 04/04/2013 17:09:07, started OpenCL miner on platform 1, device 0 (Quadro K5000M)
2013-04-04 17:09:08: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:08, checking for stratum...
2013-04-04 17:09:08: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:08, diverted to stratum on bytecoin.us.to:6327
2013-04-04 17:09:08: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:08, Setting new difficulty: 1.29718570116
2013-04-04 17:09:09: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:09, authorization failed with 8VcNiDbUvSrLB8c8sdXFGWVGXzWrHbh5Dp:1@bytecoin.us.to:6327
2013-04-04 17:09:09: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:09, Setting new difficulty: 1.27240181007
2013-04-04 17:09:12: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:12, IO errors - 1, tolerance 2

Just to check, what miner are you using? GUIMiner? If so could you try mining with DiabloMiner instead and see if it works?

[Teka]

Looks like I'm having the same problem:

2013-04-04 17:09:07: Listener for "Default": 04/04/2013 17:09:07, started OpenCL miner on platform 1, device 0 (Quadro K5000M)
2013-04-04 17:09:08: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:08, checking for stratum...
2013-04-04 17:09:08: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:08, diverted to stratum on bytecoin.us.to:6327
2013-04-04 17:09:08: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:08, Setting new difficulty: 1.29718570116
2013-04-04 17:09:09: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:09, authorization failed with 8VcNiDbUvSrLB8c8sdXFGWVGXzWrHbh5Dp:1@bytecoin.us.to:6327
2013-04-04 17:09:09: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:09, Setting new difficulty: 1.27240181007
2013-04-04 17:09:12: Listener for "Default": bytecoin.us.to:6327 04/04/2013 17:09:12, IO errors - 1, tolerance 2

Just to check, what miner are you using? GUIMiner? If so could you try mining with DiabloMiner instead and see if it works?

I'm using GUIMiner

[LucasJones]

Just finished automating the faucet!

Payouts and Donations are now instant, 24/7! It also saves me from doing a lot of pointless work!

Try it now! http://bytecoin.us.to:8000/

[LucasJones]

Just to check, what miner are you using? GUIMiner? If so could you try mining with DiabloMiner instead and see if it works?

I'm using GUIMiner

Have you tried using a different miner yet? This pool has proven to be incompatible with GUIMiner

[LucasJones]

This pool is a scam or what? I'm submitting shares, they are accepted, blocks are solved by pool but there is no payout.

8SCfz1Lg7fa3aXYsLvM2YHycQrFvyZEAoB

You are being paid, you can see at http://blockexplorer.bytecoin.in/address/8SCfz1Lg7fa3aXYsLvM2YHycQrFvyZEAoB.

You have been paid 6 times so far.

In your client the transaction should show up as 'mined', as in it comes directly from the block, with no tampering or stealing from the server

[LucasJones]

8XSXmLJ5DB6qpdEhqv4EcfkcFUmDwa8rBA

am I connected to your severs now?

You don't seem to be, you aren't using GUIMiner, Reaper or Poclbm are you?

Try CGMiner or DiabloMiner, They are tried and tested with this server, people say they work well.

[Digigami]

Great work on the faucet and pool LucasJones!

I have been using cgminer with very good success for those having issues.

I just made a donation to the faucet to help keep her topped up for ya