|
molitar
|
|
October 29, 2016, 08:39:29 PM |
|
I took a look but not sure what to put for arg 2. BTW some python script errors at least to the latest version of Python. I had to fix the () that were missing. #!/usr/bin/python # arg1 = current block number # arg2 = current network rate in thousands of solutions per second # arg2 = your solution rate
BLOCKS_PER_DAY = 576*10 # 2.5 minute block time RAMP_BLOCKS = 20000 # mining slow start
import sys
block = int(sys.argv[1]) net_rate_k = int(sys.argv[2]) your_rate = int(sys.argv[3])
daily = int(BLOCKS_PER_DAY * block/RAMP_BLOCKS) print ('Daily ramped mining reward in blocks:', daily) your_share = (your_rate/(net_rate_k * 1000.0) * daily) print ('Your estimated earnings:', your_share)
Argument two I was not sure what to put also the sol rate had to be no decimal values. Arg #1: 1150 (Chain Height) Arg #2: 1975894 Sol/s (What value do I use for the Network Hash Rate when you say in thousands? Is it 1975?) Arg #3: 54.7 (have to use non decimal so used 54 Sol/s) zec.py 1146 2019 54 Daily ramped mining reward in blocks: 330 Your estimated earnings: 0.008826151560178307 Did I get that right?
|
|
|
|
nerdralph (OP)
|
|
October 29, 2016, 09:22:52 PM |
|
I took a look but not sure what to put for arg 2. BTW some python script errors at least to the latest version of Python. I had to fix the () that were missing.
zec.py 1146 2019 54 Daily ramped mining reward in blocks: 330 Your estimated earnings: 0.008826151560178307
Did I get that right?
I updated the script to specify python2. I guess your system defaults to 3. You have the arguments correct. With the numbers as of block 1173 your estimate is .008496 ./zec.py 1173 2142 54 Daily ramped mining reward in blocks: 337 Your estimated earnings: 0.00849579831933
|
|
|
|
nerdralph (OP)
|
|
October 30, 2016, 03:14:46 PM |
|
Coinsforall is still having stability problems, and now 1 ZEC is worth about 1.2 BTC. Therefore I've switched back to eth mining for all my cards except one Rx 470. With Genoil's ZECminer I'm getting about 26 sol/s. I started using zcash.miningpoolhub.com, and after an hour of mining the pool has been stable. Reported hashrate on the pool is about 12H/s, or half the solution rate as expected.
|
|
|
|
ps_jb
|
|
October 30, 2016, 04:30:47 PM |
|
It is less profitable right now 10.30am (MT)
|
|
|
|
risinqsun
Sr. Member
Offline
Activity: 672
Merit: 273
-
|
|
October 30, 2016, 04:32:46 PM |
|
Coinsforall is still having stability problems, and now 1 ZEC is worth about 1.2 BTC. Therefore I've switched back to eth mining for all my cards except one Rx 470. With Genoil's ZECminer I'm getting about 26 sol/s. I started using zcash.miningpoolhub.com, and after an hour of mining the pool has been stable. Reported hashrate on the pool is about 12H/s, or half the solution rate as expected. [/quote Good job for 26 sol/s. I' m getting 22 sol/s
|
|
|
|
nerdralph (OP)
|
|
October 30, 2016, 08:31:58 PM |
|
Good job for 26 sol/s. I' m getting 22 sol/s Running 1250/1850 with custom BIOS mod for faster memory timing.
|
|
|
|
nerdralph (OP)
|
|
November 01, 2016, 09:45:21 PM |
|
Now running zogminer under Linux, using MPH. https://github.com/nginnever/zogminerzogminer is a huge pig of a program, and needs one instance run per GPU, but it seems stable and gets decent performance (based on silentarmy kernel I think). If you use MPH, you must use a worker name, i.e. -user=nerdralph.rig1 Otherwise you'll get a stratum auth error.
|
|
|
|
monsanto
Legendary
Offline
Activity: 1241
Merit: 1005
..like bright metal on a sullen ground.
|
|
November 01, 2016, 10:03:07 PM |
|
Now running zogminer under Linux, using MPH. https://github.com/nginnever/zogminerzogminer is a huge pig of a program, and needs one instance run per GPU, but it seems stable and gets decent performance (based on silentarmy kernel I think). If you use MPH, you must use a worker name, i.e. -user=nerdralph.rig1 Otherwise you'll get a stratum auth error. Hmm.. I might give that a try on my Linux rig. What pool(s) can you use with zogminer? Can you solo mine with it? My biggest problem with the coinsforall.io miner is that my gpus start crashing after less than 30 minutes usually. Kind of ironic that after all the complaints about a Linux only launch it looks like Windows users have a lot more mining options than Linux users.
|
|
|
|
Lafu
Legendary
Offline
Activity: 3108
Merit: 3199
|
|
November 01, 2016, 10:24:42 PM |
|
Best solutions on nicehash! First on sell my power! second on the zec nicehash pool fast payout and no Problem with the miner!
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
|
November 02, 2016, 12:04:53 AM |
|
Zogminer works fine on https://zec.suprnova.cc too
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
molitar
|
|
November 02, 2016, 05:14:46 AM |
|
Thanks for this tip. How does it perform compared to genoil?
|
|
|
|
bobben2
|
|
November 02, 2016, 05:46:37 AM |
|
Tried zogminer and it crashes after a while. The miner either just stops or it segfaults. One miner instance per gpu. Mining at flypool. This pool might have an issue? So far havent tried other pools with this miner.
|
Fellow miners, get your thens and thans in order and help other forum readers understand what you are writing. Remember the grammar basics: B larger THAN A (comparator operator). If something THEN ....
|
|
|
nerdralph (OP)
|
|
November 02, 2016, 08:30:33 AM |
|
Tried zogminer and it crashes after a while. The miner either just stops or it segfaults. One miner instance per gpu. Mining at flypool. This pool might have an issue? So far havent tried other pools with this miner.
I had one of 6 instances hang overnight, probably because I've overclocked/undervolted that card too much for zcash mining (even though it was fine for eth). If every instance on a rig hangs/crashes, I'd suspect the pool instead.
|
|
|
|
nerdralph (OP)
|
|
November 02, 2016, 08:39:28 AM |
|
For those not fluent in sh: #!/bin/sh # launch script for zogminer - Nerd Ralph 2016 public domain for i in 0 1 2 3 4 5 do src/zcash-miner -G -S=$i -stratum="stratum+tcp://us-east1.zcash.miningpoolhub.com:20570" -user=nerdralph.rig > zec$i & sleep 1 done
|
|
|
|
ImHash
|
|
November 02, 2016, 08:49:24 AM |
|
Well from what I see zcash is too much volatile and the price isn't stable what so ever, so why someone wants to mine such a coin where difficulty is determined by the price?
|
|
|
|
Tmdz
|
|
November 02, 2016, 12:57:23 PM |
|
Well from what I see zcash is too much volatile and the price isn't stable what so ever, so why someone wants to mine such a coin where difficulty is determined by the price?
That's econ 101 More profit more people.
|
|
|
|
nerdralph (OP)
|
|
November 02, 2016, 01:45:35 PM |
|
Marc tweaked his silentarmy kernel yesterday, and the change was merged into zogminer a few hours ago. I'm seing a minor improvement in the miner. pun intended :-)
|
|
|
|
BTCBusinessConsult
|
|
November 02, 2016, 01:58:02 PM |
|
Been mining on Nicehash miner since the very start, never had an issue. 6 cores of my 4770k and 2 AMD 480s with modded bios. Day one was about $25 a day, now its down to about $9.50 a day. Way better than the $3 I get from eth mining Sitting at about 58.X sol/s with this setup.
|
EPIC5k Trading on https://spectre.ai/?ref=PassiveIncome. Paying WEEKLY rewards in ETH since 2017. 100% FRAUD FREE Binary Trading Platform. $SXDT. Ask me about the ONLY smart options trading platform with 400% payouts, and their unique EPIC5000 trading system.
|
|
|
|