[ANN] XENIX [POW/POS][X11]

[cryptofarmer]

Where's the last message you posted @redking?
It's just being deleted? 

[1714965005]

1714965005

[cryptofarmer]

chain c-cex.

We found our wallet sync does not match official block explorer sync. That's why we disabled wallet for now and do not register deposits. Now block explorer is down. We will wait until it will be up again and check if we on the same chain.

Well, can you please put the wallet back online for 24 hours so everyone that has deposits sent to your exchange can receive them??   
You really should have tweet about this before just shutting the wallet down, this messed alot of people up.

I agree, A lot of coins are now send to basicaly a black hole.... Because miners have autopayout, they won't notice until its to late.

[felixbrucker]

Where's the last message you posted @redking?
It's just being deleted?  

wondering the same, would be a shame

[synthgauge]

I dont hate the guy, he makes living from 0.01 BTC contributions and thats the way he has been living since he was born. I bet hes vietnamese struggling heroine addiction, that explains why there are 100 new ICOs every day.

[barrysty1e]

https://github.com/xenixcoin/xenixcoin/commit/a65b401d2011fbddfd2dc0e0827e17c8a22efb53

Added checkpoints of 1000 and 1500, sneaky little fuck.
World is only currently at 918.

Sounds like a bit of 'lets find blocks but not announce them to the world'.

[c-cex]

We just update our wallet to latest from github but it does not sync. It was able to get 3 blocks and then stop. We tried to sync from scratch with fresh wallet.dat - same issue.

Here is what happening in debug.log for freshy launched wallet with empty data dir:

SetBestChain: new best=00000f8923e2585d5cbd  height=1  trust=2097154  blocktrust=1048577  date=11/08/16 17:38:49
ProcessBlock: ACCEPTED
received block 00000047b8d42ab011bc
SetBestChain: new best=00000047b8d42ab011bc  height=2  trust=3145731  blocktrust=1048577  date=11/21/16 05:06:15
ProcessBlock: ACCEPTED
received block 0000004b8b45189977df
SetBestChain: new best=0000004b8b45189977df  height=3  trust=4194308  blocktrust=1048577  date=11/21/16 05:08:17
ProcessBlock: ACCEPTED
received block 000000299fe41f7a5aa0
ERROR: AcceptBlock() : incorrect proof-of-work
ERROR: ProcessBlock() : AcceptBlock FAILED

After that it disconnects from node and does not get any new block. Anybody can suggest a solution?

About all deposits sent to C-CEX wallet. They are all valid and will be registered once we will be able to sync.

[redkinggg]

We just update our wallet to latest from github but it does not sync. It was able to get 3 blocks and then stop. We tried to sync from scratch with fresh wallet.dat - same issue.

Here is what happening in debug.log for freshy launched wallet with empty data dir:

SetBestChain: new best=00000f8923e2585d5cbd  height=1  trust=2097154  blocktrust=1048577  date=11/08/16 17:38:49
ProcessBlock: ACCEPTED
received block 00000047b8d42ab011bc
SetBestChain: new best=00000047b8d42ab011bc  height=2  trust=3145731  blocktrust=1048577  date=11/21/16 05:06:15
ProcessBlock: ACCEPTED
received block 0000004b8b45189977df
SetBestChain: new best=0000004b8b45189977df  height=3  trust=4194308  blocktrust=1048577  date=11/21/16 05:08:17
ProcessBlock: ACCEPTED
received block 000000299fe41f7a5aa0
ERROR: AcceptBlock() : incorrect proof-of-work
ERROR: ProcessBlock() : AcceptBlock FAILED

After that it disconnects from node and does not get any new block. Anybody can suggest a solution?

About all deposits sent to C-CEX wallet. They are all valid and will be registered once we will be able to sync.

You need to use the same wallet you had before, or all pending deposits will not go through.
Simply upload the exisitng wallet you originally had.

[CS86]

From Nova:

addnode=116.62.9.41:5556
addnode=121.42.154.119:5556
addnode=139.162.90.238:5556
addnode=139.59.177.141:5556
addnode=158.69.238.192:5556
addnode=185.45.192.150:5556
addnode=189.10.64.117:5556
addnode=200.181.80.3:5556
addnode=222.187.224.93:5556
addnode=222.187.224.97:5556
addnode=46.0.205.147:5556
addnode=5.189.155.182:5556
addnode=85.236.188.28:23883
addnode=85.24.143.58:5556
addnode=85.25.195.161:5556
addnode=86.5.90.211:5556
addnode=92.63.57.235:5556
addnode=92.63.57.241:5556
addnode=92.63.57.24:5556
addnode=95.85.33.201:5556

[barrysty1e]

We just update our wallet to latest from github but it does not sync. It was able to get 3 blocks and then stop. We tried to sync from scratch with fresh wallet.dat - same issue.

Here is what happening in debug.log for freshy launched wallet with empty data dir:

SetBestChain: new best=00000f8923e2585d5cbd  height=1  trust=2097154  blocktrust=1048577  date=11/08/16 17:38:49
ProcessBlock: ACCEPTED
received block 00000047b8d42ab011bc
SetBestChain: new best=00000047b8d42ab011bc  height=2  trust=3145731  blocktrust=1048577  date=11/21/16 05:06:15
ProcessBlock: ACCEPTED
received block 0000004b8b45189977df
SetBestChain: new best=0000004b8b45189977df  height=3  trust=4194308  blocktrust=1048577  date=11/21/16 05:08:17
ProcessBlock: ACCEPTED
received block 000000299fe41f7a5aa0
ERROR: AcceptBlock() : incorrect proof-of-work
ERROR: ProcessBlock() : AcceptBlock FAILED

After that it disconnects from node and does not get any new block. Anybody can suggest a solution?

About all deposits sent to C-CEX wallet. They are all valid and will be registered once we will be able to sync.

Code:

git clone https://github.com/xenixcoin/xenixcoin.git
cd xenixcoin
git checkout 4f64992f5d
cd src/leveldb
chmod +x build_detect_platform
make clean
make libleveldb.a libmemenv.a
cd ..
make -f makefile.unix -j4
strip xenixd


root@harry:/usr/xenixcoin/src# ./xenixd -server -daemon -rpcuser=barrystyle -rpcpassword= -rpcbind=127.0.0.1 -rpcallowip=127.0.0.1 -datadir=datadir getmininginfo
{
    "blocks" : 956,
    "currentblocksize" : 0,
    "currentblocktx" : 0,
    "difficulty" : {
        "proof-of-work" : 703.28903794,
        "proof-of-stake" : 0.00068651,
        "search-interval" : 0
    },
    "blockvalue" : 8400000,
    "netmhashps" : 3843.00689259,
    "netstakeweight" : 534.45401973,
    "errors" : "",
    "pooledtx" : 0,
    "stakeweight" : {
        "minimum" : 0,
        "maximum" : 0,
        "combined" : 0
    },
    "stakeinterest" : 1000000,
    "testnet" : false
}

there you go c-cex; currently at block 956 with no extra prodding.
dev's own nodes are giving out incorrect proof of work at block 3, but this gets ignored quickly as other legitimate hosts step in with the correct block data.

ready... go!

FYI 'git checkout 4f64992f5d' takes you to the source tree before bad checkpoints added by dev.

[cryptofarmer]

We just update our wallet to latest from github but it does not sync. It was able to get 3 blocks and then stop. We tried to sync from scratch with fresh wallet.dat - same issue.

Here is what happening in debug.log for freshy launched wallet with empty data dir:

SetBestChain: new best=00000f8923e2585d5cbd  height=1  trust=2097154  blocktrust=1048577  date=11/08/16 17:38:49
ProcessBlock: ACCEPTED
received block 00000047b8d42ab011bc
SetBestChain: new best=00000047b8d42ab011bc  height=2  trust=3145731  blocktrust=1048577  date=11/21/16 05:06:15
ProcessBlock: ACCEPTED
received block 0000004b8b45189977df
SetBestChain: new best=0000004b8b45189977df  height=3  trust=4194308  blocktrust=1048577  date=11/21/16 05:08:17
ProcessBlock: ACCEPTED
received block 000000299fe41f7a5aa0
ERROR: AcceptBlock() : incorrect proof-of-work
ERROR: ProcessBlock() : AcceptBlock FAILED

After that it disconnects from node and does not get any new block. Anybody can suggest a solution?

About all deposits sent to C-CEX wallet. They are all valid and will be registered once we will be able to sync.

Code:

git clone https://github.com/xenixcoin/xenixcoin.git
cd xenixcoin
git checkout 4f64992f5d
cd src/leveldb
chmod +x build_detect_platform
make clean
make libleveldb.a libmemenv.a
cd ..
make -f makefile.unix -j4
strip xenixd


root@harry:/usr/xenixcoin/src# ./xenixd -server -daemon -rpcuser=barrystyle -rpcpassword= -rpcbind=127.0.0.1 -rpcallowip=127.0.0.1 -datadir=datadir getmininginfo
{
    "blocks" : 956,
    "currentblocksize" : 0,
    "currentblocktx" : 0,
    "difficulty" : {
        "proof-of-work" : 703.28903794,
        "proof-of-stake" : 0.00068651,
        "search-interval" : 0
    },
    "blockvalue" : 8400000,
    "netmhashps" : 3843.00689259,
    "netstakeweight" : 534.45401973,
    "errors" : "",
    "pooledtx" : 0,
    "stakeweight" : {
        "minimum" : 0,
        "maximum" : 0,
        "combined" : 0
    },
    "stakeinterest" : 1000000,
    "testnet" : false
}

there you go c-cex; currently at block 956 with no extra prodding.
dev's own nodes are giving out incorrect proof of work at block 3, but this gets ignored quickly as other legitimate hosts step in with the correct block data.

ready... go!

FYI 'git checkout 4f64992f5d' takes you to the source tree before bad checkpoints added by dev.

So what do the miners want? Wich chain to follow?
Because of the problems syncing to the "official" chain.
I suggest we follow chain with blockheight now ~956.
If not please provide proper source and nodes.

[redkinggg]

We just update our wallet to latest from github but it does not sync. It was able to get 3 blocks and then stop. We tried to sync from scratch with fresh wallet.dat - same issue.

Here is what happening in debug.log for freshy launched wallet with empty data dir:

SetBestChain: new best=00000f8923e2585d5cbd  height=1  trust=2097154  blocktrust=1048577  date=11/08/16 17:38:49
ProcessBlock: ACCEPTED
received block 00000047b8d42ab011bc
SetBestChain: new best=00000047b8d42ab011bc  height=2  trust=3145731  blocktrust=1048577  date=11/21/16 05:06:15
ProcessBlock: ACCEPTED
received block 0000004b8b45189977df
SetBestChain: new best=0000004b8b45189977df  height=3  trust=4194308  blocktrust=1048577  date=11/21/16 05:08:17
ProcessBlock: ACCEPTED
received block 000000299fe41f7a5aa0
ERROR: AcceptBlock() : incorrect proof-of-work
ERROR: ProcessBlock() : AcceptBlock FAILED

After that it disconnects from node and does not get any new block. Anybody can suggest a solution?

About all deposits sent to C-CEX wallet. They are all valid and will be registered once we will be able to sync.

Code:

git clone https://github.com/xenixcoin/xenixcoin.git
cd xenixcoin
git checkout 4f64992f5d
cd src/leveldb
chmod +x build_detect_platform
make clean
make libleveldb.a libmemenv.a
cd ..
make -f makefile.unix -j4
strip xenixd


root@harry:/usr/xenixcoin/src# ./xenixd -server -daemon -rpcuser=barrystyle -rpcpassword= -rpcbind=127.0.0.1 -rpcallowip=127.0.0.1 -datadir=datadir getmininginfo
{
    "blocks" : 956,
    "currentblocksize" : 0,
    "currentblocktx" : 0,
    "difficulty" : {
        "proof-of-work" : 703.28903794,
        "proof-of-stake" : 0.00068651,
        "search-interval" : 0
    },
    "blockvalue" : 8400000,
    "netmhashps" : 3843.00689259,
    "netstakeweight" : 534.45401973,
    "errors" : "",
    "pooledtx" : 0,
    "stakeweight" : {
        "minimum" : 0,
        "maximum" : 0,
        "combined" : 0
    },
    "stakeinterest" : 1000000,
    "testnet" : false
}

there you go c-cex; currently at block 956 with no extra prodding.
dev's own nodes are giving out incorrect proof of work at block 3, but this gets ignored quickly as other legitimate hosts step in with the correct block data.

ready... go!

FYI 'git checkout 4f64992f5d' takes you to the source tree before bad checkpoints added by dev.

So what do the miners want? Wich chain to follow?
Because of the problems syncing to the "official" chain.
I suggest we follow chain with blockheight now ~956.
If not please provide proper source and nodes.

I agree.  Stay with chain with blockheight now ~956....which ccex had up already.  Why the fuss and taking down the wallet...I dont know.

[stiger25]

I sent you a message to give you the solution

We just update our wallet to latest from github but it does not sync. It was able to get 3 blocks and then stop. We tried to sync from scratch with fresh wallet.dat - same issue.

Here is what happening in debug.log for freshy launched wallet with empty data dir:

SetBestChain: new best=00000f8923e2585d5cbd  height=1  trust=2097154  blocktrust=1048577  date=11/08/16 17:38:49
ProcessBlock: ACCEPTED
received block 00000047b8d42ab011bc
SetBestChain: new best=00000047b8d42ab011bc  height=2  trust=3145731  blocktrust=1048577  date=11/21/16 05:06:15
ProcessBlock: ACCEPTED
received block 0000004b8b45189977df
SetBestChain: new best=0000004b8b45189977df  height=3  trust=4194308  blocktrust=1048577  date=11/21/16 05:08:17
ProcessBlock: ACCEPTED
received block 000000299fe41f7a5aa0
ERROR: AcceptBlock() : incorrect proof-of-work
ERROR: ProcessBlock() : AcceptBlock FAILED

After that it disconnects from node and does not get any new block. Anybody can suggest a solution?

About all deposits sent to C-CEX wallet. They are all valid and will be registered once we will be able to sync.

[barrysty1e]

So what do the miners want? Wich chain to follow?
Because of the problems syncing to the "official" chain.
I suggest we follow chain with blockheight now ~956.
If not please provide proper source and nodes.

https://github.com/barrystyle/xenixcoin

modified pre-checkpoint with two 'honest' nodes set as seeds.
have fun all.

[cryptofarmer]

So what do the miners want? Wich chain to follow?
Because of the problems syncing to the "official" chain.
I suggest we follow chain with blockheight now ~956.
If not please provide proper source and nodes.

https://github.com/barrystyle/xenixcoin

modified pre-checkpoint with two 'honest' nodes set as seeds.
have fun all.

Synced to what chain / height?

[redkinggg]

So what do the miners want? Wich chain to follow?
Because of the problems syncing to the "official" chain.
I suggest we follow chain with blockheight now ~956.
If not please provide proper source and nodes.

https://github.com/barrystyle/xenixcoin

modified pre-checkpoint with two 'honest' nodes set as seeds.
have fun all.

Thanks barry.  How you been my aussie brother?!?!

[barrysty1e]

Synced to what chain / height?

the correct chain (block 961), at this second.
i say the correct chain, as the other chain is invalid (block 3 PoW incorrect).

Thanks barry.  How you been my aussie brother?!?!

good man,
still using those antminers to save heating cost over winter
good to see you around bud

[stiger25]

We modify the block reward

The first block generates 10000000 currency (premine)
From 2 to 100 block 0 currency
From 101 to 575 block 19 currency
From 576 to 3000000 block 0.084 currency

[felixbrucker]

actually those checkpoints secure the blockchain (see https://bitcointalk.org/index.php?topic=194078.0) to prevent additional chains with really fast asics

now the chain used by ccex and dutch-mining is off of the "official" one, but thats another matter

if one wants to sync to the official chain i suggest using the addnodes provided by nova
the other way round use those by ccex

[EpyxZ]

actually those checkpoints secure the blockchain (see https://bitcointalk.org/index.php?topic=194078.0) to prevent additional chains with really fast asics

now the chain used by ccex and dutch-mining is off of the "official" one, but thats another matter

if one wants to sync to the official chain i suggest using the addnodes provided by nova
the other way round use those by ccex

It's too close to xmas to be using that language man :p just gave me a OMG we got AA batteries but needed AAA. lol.

XENIX the official xmas coin :p

[barrysty1e]

actually those checkpoints secure the blockchain (see https://bitcointalk.org/index.php?topic=194078.0) to prevent additional chains with really fast asics

now the chain used by ccex and dutch-mining is off of the "official" one, but thats another matter

if one wants to sync to the official chain i suggest using the addnodes provided by nova
the other way round use those by ccex

well aware of the reasons for having checkpoint blocks, just as well as their potential for abuse.

Code:

trying connection 208.163.158.201 lastseen=0.0hrs
received block 00000f8923e2585d5cbd
SetBestChain: new best=00000f8923e2585d5cbd  height=1  trust=2097154  blocktrust=1048577  date=11/08/16 17:38:49
ProcessBlock: ACCEPTED
received block 00000047b8d42ab011bc
SetBestChain: new best=00000047b8d42ab011bc  height=2  trust=3145731  blocktrust=1048577  date=11/21/16 05:06:15
ProcessBlock: ACCEPTED
received block 0000004b8b45189977df
* hyuck, we're gonna need minimum PoW 1e0fffff
SetBestChain: new best=0000004b8b45189977df  height=3  trust=4194308  blocktrust=1048577  date=11/21/16 05:08:17
ProcessBlock: ACCEPTED
received block 000000299fe41f7a5aa0
* hyuck, we're gonna need minimum PoW 1e09a06c
ERROR: AcceptBlock() : incorrect proof-of-work
ERROR: ProcessBlock() : AcceptBlock FAILED
Misbehaving: 92.63.57.24:5556 (0 -> 100) DISCONNECTING
disconnecting node 92.63.57.24
getblocks -1 to 00000000000000000000 limit 500
getblocks -1 to 00000000000000000000 limit 500

for the sake of being a team player, rather than a dick; check the 'hyucks' above. some debug code i've thrown in whilst attempting to sync against the 'official' nodes.

block 4 needs to be 1e09a06c, but in xenixblockchain.com; it is listed as 1e0340da
c-cex has been on the correct chain from the start; not sure what happened with nova.