[ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us

[CoinBuzz]

Is there any help for using this pool's API ?

What are you trying to do?

I want to know which coin i am mining now and what was it's price during the mine. also if i can i want to order cashout from that API.

Using the auto sell at cryptsy is driving the price of coins lower, I did advise people to look at this option but now I think it is a bad idea.

Yes, indeed. and this way is so bad for the coin we already mined and trying to take profit from it. I asked this from Bitjohn in cryptsy thread and he answered me here.

[denao]

The miners are the workers choosing the best rate of pay by switching coins. The parasites are the creators of copy coins and the hoarders "early adopters" speculating on a massive return. It really is laughable to here them cry when someone else mines "their" coin and the difficulty goes up.

With you on that! I would add every people that actually buy those alt coins. If it is profitable, that's because people are buying it. Convince everybody to stop using those scamcoins and we will stop mining them.

[napoleon2121]

hi and gratz for the pool...

i hav a problem with the pool.

i start mining with this command

Code:

cgminer --scrypt -o stratum+tcp://pool1.us.multipool.us:7777 -u napoleon2121.1 -p 1 --lookup-gap 2 --expiry 10 --scan-time 5 --queue 2  --shaders 2048 --thread-concurrency 8192 -I 13 -g 2 -w 256 --auto-fan --gpu-fan 65-85,90-100 --gpu-engine 970,800 --gpu-memclock 1620,1450 --temp-target 74,70 --temp-cutoff 80,78

everything goes good and sometime in the day it sais.  stratum lost 0 shares. and the cgminer crasses. any ideas

ty in advance

[MobGod]

@flound have you looked into my account yet I still see - balances not sure why plus I didn't get any of the deposits I was e-mailed about

[Aurum]

hi and gratz for the pool...

i hav a problem with the pool.

i start mining with this command

Code:

cgminer --scrypt -o stratum+tcp://pool1.us.multipool.us:7777 -u napoleon2121.1 -p 1 --lookup-gap 2 --expiry 10 --scan-time 5 --queue 2  --shaders 2048 --thread-concurrency 8192 -I 13 -g 2 -w 256 --auto-fan --gpu-fan 65-85,90-100 --gpu-engine 970,800 --gpu-memclock 1620,1450 --temp-target 74,70 --temp-cutoff 80,78

everything goes good and sometime in the day it sais.  stratum lost 0 shares. and the cgminer crasses. any ideas

ty in advance

I'm still getting unrecovered stratum disconnects daily. I tried upgrading to cgminer 3.4.0 as Kon said he thought it had a fix to help that, but still the same.

[flound1129]

hi and gratz for the pool...

i hav a problem with the pool.

i start mining with this command

Code:

cgminer --scrypt -o stratum+tcp://pool1.us.multipool.us:7777 -u napoleon2121.1 -p 1 --lookup-gap 2 --expiry 10 --scan-time 5 --queue 2  --shaders 2048 --thread-concurrency 8192 -I 13 -g 2 -w 256 --auto-fan --gpu-fan 65-85,90-100 --gpu-engine 970,800 --gpu-memclock 1620,1450 --temp-target 74,70 --temp-cutoff 80,78

everything goes good and sometime in the day it sais.  stratum lost 0 shares. and the cgminer crasses. any ideas

ty in advance

Try cgminer 3.3.1 and see if you still get the crashes.

[napoleon2121]

I am using like 2.11.4 and i hav the same problerm all day. i think i will put a second pool also so i don't loose mining when it goes on dc

[napoleon2121]

hi and gratz for the pool...

i hav a problem with the pool.

i start mining with this command

Code:

cgminer --scrypt -o stratum+tcp://pool1.us.multipool.us:7777 -u napoleon2121.1 -p 1 --lookup-gap 2 --expiry 10 --scan-time 5 --queue 2  --shaders 2048 --thread-concurrency 8192 -I 13 -g 2 -w 256 --auto-fan --gpu-fan 65-85,90-100 --gpu-engine 970,800 --gpu-memclock 1620,1450 --temp-target 74,70 --temp-cutoff 80,78

everything goes good and sometime in the day it sais.  stratum lost 0 shares. and the cgminer crasses. any ideas

ty in advance

Try cgminer 3.3.1 and see if you still get the crashes.

Will try that in a few

[flound1129]

@flound have you looked into my account yet I still see - balances not sure why plus I didn't get any of the deposits I was e-mailed about

We've spoken quite a bit about why some people have negative balances.

If you aren't seeing the transactions, check the block crawlers first.

[flound1129]

I am using like 2.11.4 and i hav the same problerm all day. i think i will put a second pool also so i don't loose mining when it goes on dc

You should always have a backup pool configured.  I suggest give-me-ltc.com.

[MobGod]

@flound have you looked into my account yet I still see - balances not sure why plus I didn't get any of the deposits I was e-mailed about

We've spoken quite a bit about why some people have negative balances.

If you aren't seeing the transactions, check the block crawlers first.

Ok I've checked but in the site still telling me I have a negative balance for a couple coins

[zepadee]

Looks like pool and website down.

EDIT: NM, back up.

[GSnak]

Using the auto sell at cryptsy is driving the price of coins lower, I did advise people to look at this option but now I think it is a bad idea.

Yes, indeed. and this way is so bad for the coin we already mined and trying to take profit from it. I asked this from Bitjohn in cryptsy thread and he answered me here.

Why is this an issue? If a coin is worth more than a certain suppressed price it'll go right back up.

1. Wait for multipool to switch to a coin
2. Wait for miners to dump and price to drop
3. Buy coin at low price
4. Profit

If a coin fails to recover there's a reason for it.

[chup]

Tried the pool for more than 3 days and my final result is less than if I mined LTC only. I suspect that more of the transactions listed under withdrawals:
MEC   Aug 30 7:51 AM   MX58o5eo....   4.18496010
MEC   Aug 30 6:52 AM   MX58o5eo....   4.28384310
MNC   Aug 30 12:11 AM   MUjkarer....   1.03387473
CGB   Aug 29 11:20 PM   5XC7kNhk....   1.00187345
DGC   Aug 29 9:16 PM   DBpS7zWM....   4.02644454
MEC   Aug 29 1:46 PM   MX58o5eo....   4.00481570
CGB   Aug 29 1:35 PM   5XC7kNhk....   1.00989483
MEC   Aug 29 6:34 AM   MX58o5eo....   4.68876020
MEC   Aug 29 5:57 AM   MX58o5eo....   4.53480670
MEC   Aug 29 5:17 AM   MX58o5eo....   4.56381500
MEC   Aug 29 4:56 AM   MX58o5eo....   4.48199951
WDC   Aug 29 4:13 AM   WkEDPFGi....   4.71463530
WDC   Aug 29 3:29 AM   WkEDPFGi....   4.59281850
DGC   Aug 29 1:47 AM   DBpS7zWM....   4.07053633
are not getting to my cryptsy deposits   . I think reverting to LTC...

EDIT: Blah, Cryptsy stopped trading MEC couple moments ago   . Now I should think what to do with my MECs... Any idea where to trade for BTC/LTC?
EDIT2: This was fast, just lost my MECs on Cryptsy, it disappeared even from balances list... 

[disclaimer201]

This is the downside of mining unknown alts at a multipool I guess. Some of them may be flawed or worthless faster than it took some copy-and-paste dev to launch them.

Nevertheless, I doubt going back to just mining ltc will be more profitable.

[paulm]

EDIT: Blah, Cryptsy stopped trading MEC couple moments ago   . Now I should think what to do with my MECs... Any idea where to trade for BTC/LTC?
EDIT2: This was fast, just lost my MECs on Cryptsy, it disappeared even from balances list... 

That sucks, I sold 863 MEC yesterday on Cryptsy, wonder why they removed it. I guess Flound should disable it on the mulitpool.

[purelithium]

Guys: There's supposedly a MEC fork, trading is suspended until they sort out their daemon.

Flound: You might want to halt MEC until the forking business is sorted out.

EDIT: MEC is now being traded again.

[paulm]

Guys: There's supposedly a MEC fork, trading is suspended until they sort out their daemon.

Flound: You might want to halt MEC until the forking business is sorted out.

EDIT: MEC is now being traded again.

That's good, CAP is still up in the air. How long has it been off Cryptsy now? From Flound's post the new client should be out today...

@flound
do you plan to active CAP in the next time ?

EDIT
my question is not relevant.
CAP is disabled at cryptsy

They appear to have gotten most of the issues sorted out with the new client which is pending release (1.5.0).  Once that is released and the network appears stable, I will activate CAP on the mutliport.  But not until it's back on Cryptsy.

Anyone know when the new CAP client will be out? If someone could point me to a thread on its development that would be greatly appreciated.

The dev thinks he fixed all the issues but he's not sure, he said he'd wait 48 hours and then release the client.

It's a hard fork, so he doesn't want to release it and then have problems happen again.

[flound1129]

Guys: There's supposedly a MEC fork, trading is suspended until they sort out their daemon.

Flound: You might want to halt MEC until the forking business is sorted out.

EDIT: MEC is now being traded again.

We're on the same chain as the block explorer, at least.

[guitarplinker]

So do these forks happen when a certain pool or person controls over 51% of the network hashrate, or how do they happen?

Seems they happen quite often with certain coins...

*cough* CAP