[ANN][LTC][Pool][PPLNS] WeMineLTC.com | 0% FEES! | Stratum | DDoS Protection |!!

[WeTradeCoins]

http://postimg.org/image/se4zie1on/

this screenshot connects to the USA server not the EU one!

[WeTradeCoins]

Ok we just found another block, the "Round Estimate 0.09959069 LTC" which is about right I was getting before. But looking at the PAYOUT / TRANSACTION LOG under unconfirmed it says that I'll be paid 0.05766288 which is very low.

phuck this pool, sorry Admin you had a great pool and you have been screwing us over for almost 24hrs now. I'm out. 

It would be a bit early to say admin is screwing us over.  It is a new pool yes, and there have been some issues - but good luck even getting a response  from notroll. WeTradeCoins has so far been very helpful, and I really believe/hope this will be on the lines of Slush's or other stable great pools on the BTC side - which is what LTC REALLY needs.

Thanks for your support...!We indeed plan to make a difference in the LTC world, and we thought that if there is something missing from most pools, is the personal touch and connection between users/OPs. We didnt build this pool in regards of scam anyone, or get-rich-in-1-day. End of the day, if that was our plan, wouldn't be so stupid from us to pull some shitty thing like this in our early stages???

As i wrote in the announcement, the Estimate Reward is around 60% off higher. While we try to iron out this annoying bug, you are free to use any calculator online with your current hashrate and compare what you SHOULD make and what you actually do with us. And we bet our pride that if it wont be identical, it would be even higher, since we run on ABSOLUTELY 0% fee with no hidden bullshit anywhere! We run on a donation only scheme, just for this reason.

Will post updates with the bug and fix asap as we solve it! Please mine with confidence in the meanwhile on the EU one

Regards

[ymer]

Ok we just found another block, the "Round Estimate 0.09959069 LTC" which is about right I was getting before. But looking at the PAYOUT / TRANSACTION LOG under unconfirmed it says that I'll be paid 0.05766288 which is very low.

phuck this pool, sorry Admin you had a great pool and you have been screwing us over for almost 24hrs now. I'm out. 

It would be a bit early to say admin is screwing us over.  It is a new pool yes, and there have been some issues - but good luck even getting a response  from notroll. WeTradeCoins has so far been very helpful, and I really believe/hope this will be on the lines of Slush's or other stable great pools on the BTC side - which is what LTC REALLY needs.

I think I worded that badly, I mean that the errors from the pool are making the miners lose money.



To the Admin, sorry for the attitude, if you think everything is right can you please check it out, my miner is under puppycock on your pool.

[GeekMan]

Successfully mining on WeMineLTC!

Could we pleas see a 24h (actual) earnings listed (Maybe under Acct. Balance) as well as have a miner notification added?  It would also be cool to have a chart added of LTC blocks mined as well as network hash rate and next expected difficulty as well as a profitability notification on the top of the page.

Just suggestions ...

[WeTradeCoins]

Successfully mining on WeMineLTC!

Could we pleas see a 24h (actual) earnings listed (Maybe under Acct. Balance) as well as have a miner notification added?  It would also be cool to have a chart added of LTC blocks mined as well as network hash rate and next expected difficulty as well as a profitability notification on the top of the page.

Just suggestions ...

All those suggestions are already in our to-do list Just spare with us, ther ear eso many things that need to be done and it takes more time than you can imagine But they are all in our to-do list, and they WILL be done in near future

[Kinetic915]

any idea on how to get my miners working?  :/ I think i just have a problem with cgminer

[WeTradeCoins]

any idea on how to get my miners working?  :/ I think i just have a problem with cgminer

You still havent posted a screenshot with the europe server ! The one you posted points to the USA one!

[Kinetic915]

it does the exact same thing.  I have this problem with all pools for some reason.  Ill just make another thread somewhere

[GeekMan]

All those suggestions are already in our to-do list Just spare with us, ther ear eso many things that need to be done and it takes more time than you can imagine But they are all in our to-do list, and they WILL be done in near future

Good to hear.  Looks like I am in the top 15   Will be adding another 2MH/s in the near future.

[WeTradeCoins]

it does the exact same thing.  I have this problem with all pools for some reason.  Ill just make another thread somewhere

Have you tried lowering Intensity to 13? 20 is way too high.

[WeTradeCoins]

also what GPUs you using?

[Kinetic915]

I'm trying to use as a dedicated miner,  3 7950s, for some reason it just wont reply with accepted at any point. 

[WeTradeCoins]

I'm trying to use as a dedicated miner,  3 7950s, for some reason it just wont reply with accepted at any point. 

Replace your .bat with this and let me know what it does

cgminer --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u yourUsername -p YourPassword --thread-concurrency 8192 -I 13 -g 2 -w 256

[Kinetic915]

well that got it working!  strangely cgminer is reporting a combined average of 1.5 M/hs with each card pulling 600 kh/s the dashboard on wemineltc reports 150 k/hs

[bitcoinnix]

well that got it working!  strangely cgminer is reporting a combined average of 1.5 M/hs with each card pulling 600 kh/s the dashboard on wemineltc reports 150 k/hs

Those reports are time based averages and will get more accurate with time.  This pool is on the level - I speak from experience both ways (see sig...)

[Kinetic915]

on the level?

[WeTradeCoins]

on the level?

He means that we are awesome

Im glad it worked for you Dont worry what site reports at the moment, it takes average prices per 10 minutes of your hash power. In around 20~30 mins you should see the correct number. You dont get paid based on Hash power but based on shares submitted ! So dont worry

[Kinetic915]

gotcha yes excited to get this running.  ive been using notroll up til now :/  my confusion is to why the settings on the ltc hardware comparison page are so drastically off.....

-I 20 --thread-concurrency 24768 --worksize 256 Win7, 13.3 beta drivers (Currently running avg : 1.2 Mh/s with 2x).

[WeTradeCoins]

gotcha yes excited to get this running.  ive been using notroll up til now :/  my confusion is to why the settings on the ltc hardware comparison page are so drastically off.....

-I 20 --thread-concurrency 24768 --worksize 256 Win7, 13.3 beta drivers (Currently running avg : 1.2 Mh/s with 2x).

Well LTC is not so easy as BTC for mining. It takes lot of(painful) testing, and thats why we are here - we've been through this with trial and error and we try to help our users as much as possible Build a pool- anyone can build a pool!! Important thing is to build a community

And to answer to your question, why they are so drastically off....

BECAUSE IT CAN!!    Thats the magic of the internet afterall... ^__^


Happy mining!!

[spinx]

I'm trying to use as a dedicated miner,  3 7950s, for some reason it just wont reply with accepted at any point. 

i finally got my workers going, there has been alot of problems, but now its atleast stable. Have 3 7950's running, 2 of them @ stock speed (core@840 and memory@1450 to get 0,58 ratio), and 1 down-clocked to get lower temps (core@580, memory@1000). Still waiting for my pcie-risers.

Im getting about 240Kh/s per card with I=13, and about 490Kh/s at I=20. I hade about 75% HW's before, then i changed --thread-concurrency =  22528 and I=20 and after that less than 1% HW's. Why?

This is my bat file:
cgminer.exe --scrypt -o stratum+tcp://eu.wemineltc.com:3333 -u user -p password --shaders 1792 --intensity 20 --worksize 128 -g 1 --gpu-engine 580,840,840 --gpu-memclock 1000,1450,1450 --thread-concurrency 22528 --gpu-fan 100

Will start to overclock to get better numbers as soon i get my new case in order. Is 490Kh/s @ stock OK for a 7950? This is a screenshot and the code from the .bat.